[asterisk-r2] Status channel R2

[Heros Amaral]

Moises,

Physical disconnection, ie the removal of the cable, and with respect to
alarms, how to make their interpretation, where can I see it?

Best Regards.

*Heros Santos Amaral Filho*

*dCCA - Digium Certified Asterisk Administrator*
*+55 61 99243-7457*
heros.amaral at gmail.com




2016-10-19 14:06 GMT-02:00 Moises Silva <moises.silva at gmail.com>:

> On Wed, Oct 19, 2016 at 6:30 AM, Heros Amaral <heros.amaral at gmail.com>
> wrote:
>
>> Hi,
>>
>> When I run the command "mfcr2 show channels" I can see the status of the
>> channels going to what I believe is a configuration error or even a bug
>> when I restart the computer all channels appear as "bloked" and so I do
>> connect with E1 status is as "IDLE" so far so good, however to my mind
>> when I do disconnecting the channel should be as "bloked" and not as "
>> 0x80" or "0x00", which you can is causing this error or if it is a bug in
>> the library.
>>
>
> What do you mean by 'disconnecting' ? if there are alarms in the span, the
> library will not try to interpret the bits and instead show hex values
> because when the span is in alarm we cannot be confident about those
> values.
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20161019/d3b43c00/attachment-0001.html>