[asterisk-r2] Status channel R2

[Moises Silva]

On Wed, Oct 19, 2016 at 6:30 AM, Heros Amaral <heros.amaral at gmail.com>
wrote:

> Hi,
>
> When I run the command "mfcr2 show channels" I can see the status of the
> channels going to what I believe is a configuration error or even a bug
> when I restart the computer all channels appear as "bloked" and so I do
> connect with E1 status is as "IDLE" so far so good, however to my mind
> when I do disconnecting the channel should be as "bloked" and not as "0x80"
> or "0x00", which you can is causing this error or if it is a bug in the
> library.
>

What do you mean by 'disconnecting' ? if there are alarms in the span, the
library will not try to interpret the bits and instead show hex values
because when the span is in alarm we cannot be confident about those
values.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20161019/517b9258/attachment.html>