[asterisk-r2] Status channel R2

[Alexandre Cavalcante Alencar]

Conf files?
On Wed, 19 Oct 2016 at 13:18 Heros Amaral <heros.amaral at gmail.com> wrote:

> Moises,
>
> Physical disconnection, ie the removal of the cable, and with respect to
> alarms, how to make their interpretation, where can I see it?
>
> Best Regards.
>
> *Heros Santos Amaral Filho*
>
> *dCCA - Digium Certified Asterisk Administrator*
> *+55 61 99243-7457*
> heros.amaral at gmail.com
>
>
>
>
> 2016-10-19 14:06 GMT-02:00 Moises Silva <moises.silva at gmail.com>:
>
> On Wed, Oct 19, 2016 at 6:30 AM, Heros Amaral <heros.amaral at gmail.com>
> wrote:
>
> Hi,
>
> When I run the command "mfcr2 show channels" I can see the status of the
> channels going to what I believe is a configuration error or even a bug
> when I restart the computer all channels appear as "bloked" and so I do
> connect with E1 status is as "IDLE" so far so good, however to my mind
> when I do disconnecting the channel should be as "bloked" and not as "0x80"
> or "0x00", which you can is causing this error or if it is a bug in the
> library.
>
>
> What do you mean by 'disconnecting' ? if there are alarms in the span, the
> library will not try to interpret the bits and instead show hex values
> because when the span is in alarm we cannot be confident about those
> values.
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20161019/66b6dc60/attachment.html>