[asterisk-r2] CID entrante en E1 CANTV
Rabih R. Bou Orm A.
rabihbouorm at gmail.com
Sun May 27 11:44:48 CDT 2012
Esta combinación ha sido excelente para mi:
Dahdi 2.4.1.2
Asterisk 1.4.39.1
OpenR2 1.3.2
Si quieres utiliza una PC como media Gateway para recibir el E1 y conectalo
a un Elastix 2.3.0 por IAX2 para que la IP-PBX sea amigable al
administrador de la red.
Saludos,
RB.
2012/5/27 Jose Daniel Yribarren <jdyribarren at compusan.com.ve>
> gracias amigo, en unos dias instalare otro servidor de este tipo y vere si
> funciona el cid, si no lo hace entonces revisare mas a fondo...
>
> 2012/5/27 Rabih R. Bou Orm A. <rabihbouorm at gmail.com>
>
> Jose Daniel,
>>
>> Siento no poder ayudarte mas, porque en las configuraciones también he
>> notado que has jugado con get_ani_first ... mi configuración funcional para
>> entrantes con DTMF-R2 ha sido la siguiente:
>>
>> context=from-pstn
>> group=2
>> signalling=mfcr2
>> mfcr2_variant=ve
>> mfcr2_dtmf_detection=0
>> mfcr2_dtmf_dialing=0
>> mfcr2_get_ani_first=yes
>> mfcr2_immediate_accept=no
>> mfcr2_max_ani=11
>> mfcr2_max_dnis=4
>> mfcr2_mfback_timeout=3000
>> channel => 32-46
>>
>> Atentamente,
>> RB.
>>
>> 2012/5/26 Jose Daniel Yribarren <jdyribarren at compusan.com.ve>
>>
>>> lo mas curioso es que mande a guardar los log entrante en otra carpeta
>>> cantv2, se creo la carpeta pero no hay archivos de las llamadas que
>>> recibo......
>>>
>>> raro
>>>
>>>
>>> 2012/5/26 Jose Daniel Yribarren <jdyribarren at compusan.com.ve>
>>>
>>>> je y no has visto nada, reviso log y solo veo los de llamadas
>>>> salientes, no de entrantes....
>>>> pero tome eso tel cli
>>>>
>>>> New MFC/R2 call detected on chan 1.
>>>> MFC/R2 call offered on chan 1. ANI = (restricted), DNIS = 400, Category
>>>> = National Subscriber
>>>> MFC/R2 call has been accepted on backward channel 1
>>>> -- Executing [400 at from-pstn:1] Set("DAHDI/1-1", "__FROM_DID=400")
>>>> in new stack
>>>> -- Executing [400 at from-pstn:2] Gosub("DAHDI/1-1",
>>>> "app-blacklist-check|s|1") in new stack
>>>> -- Executing [s at app-blacklist-check:1]
>>>> LookupBlacklist("DAHDI/1-1", "") in new stack
>>>> -- Executing [s at app-blacklist-check:2] GotoIf("DAHDI/1-1",
>>>> "0?blacklisted") in new stack
>>>> -- Executing [s at app-blacklist-check:3] Return("DAHDI/1-1", "") in
>>>> new stack
>>>> -- Executing [400 at from-pstn:3] ExecIf("DAHDI/1-1", "1
>>>> |Set|CALLERID(name)=") in new stack
>>>> -- Executing [400 at from-pstn:4] Set("DAHDI/1-1", "FAX_RX=disabled")
>>>> in new stack
>>>> -- Executing [400 at from-pstn:5] Set("DAHDI/1-1",
>>>> "__CALLINGPRES_SV=allowed_not_screened") in new stack
>>>> -- Executing [400 at from-pstn:6] SetCallerPres("DAHDI/1-1",
>>>> "allowed_not_screened") in new stack
>>>> -- Executing [400 at from-pstn:7] Goto("DAHDI/1-1", "ivr-12|s|1") in
>>>> new stack
>>>> -- Goto (ivr-12,s,1)
>>>> -- Executing [s at ivr-12:1] Set("DAHDI/1-1",
>>>> "MSG=custom/ivrprincipal") in new stack
>>>> -- Executing [s at ivr-12:2] Set("DAHDI/1-1", "LOOPCOUNT=0") in new
>>>> stack
>>>> -- Executing [s at ivr-12:3] Set("DAHDI/1-1",
>>>> "__DIR-CONTEXT=default") in new stack
>>>> -- Executing [s at ivr-12:4] Set("DAHDI/1-1", "_IVR_CONTEXT_ivr-12=")
>>>> in new stack
>>>> -- Executing [s at ivr-12:5] Set("DAHDI/1-1", "_IVR_CONTEXT=ivr-12")
>>>> in new stack
>>>> -- Executing [s at ivr-12:6] GotoIf("DAHDI/1-1", "0?begin") in new
>>>> stack
>>>> -- Executing [s at ivr-12:7] Answer("DAHDI/1-1", "") in new stack
>>>> -- Executing [s at ivr-12:8] Wait("DAHDI/1-1", "1") in new stack
>>>> -- Executing [s at ivr-12:9] Set("DAHDI/1-1", "TIMEOUT(digit)=3") in
>>>> new stack
>>>> -- Digit timeout set to 3
>>>> -- Executing [s at ivr-12:10] Set("DAHDI/1-1",
>>>> "TIMEOUT(response)=10") in new stack
>>>> -- Response timeout set to 10
>>>> -- Executing [s at ivr-12:11] Set("DAHDI/1-1", "__IVR_RETVM=") in new
>>>> stack
>>>> -- Executing [s at ivr-12:12] ExecIf("DAHDI/1-1",
>>>> "1|Background|custom/ivrprincipal") in new stack
>>>> -- <DAHDI/1-1> Playing 'custom/ivrprincipal' (language 'es')
>>>> Chan 1 - Far end disconnected. Reason: Normal Clearing
>>>> MFC/R2 call disconnected on chan 1
>>>> == Spawn extension (ivr-12, s, 12) exited non-zero on 'DAHDI/1-1'
>>>> -- Executing [h at ivr-12:1] Hangup("DAHDI/1-1", "") in new stack
>>>> == Spawn extension (ivr-12, h, 1) exited non-zero on 'DAHDI/1-1'
>>>> MFC/R2 call end on chan 1
>>>> -- Hungup 'DAHDI/1-1'
>>>> voipserver*CLI>
>>>>
>>>>
>>>>
>>>>
>>>> El 26 de mayo de 2012 17:54, Rabih R. Bou Orm A. <rabihbouorm at gmail.com
>>>> > escribió:
>>>>
>>>> Curioso,
>>>>>
>>>>> El log de la llamada entrante que dice? No te envia nada?
>>>>>
>>>>> El 26 de mayo de 2012 17:52, Jose Daniel Yribarren <
>>>>> jdyribarren at compusan.com.ve> escribió:
>>>>>
>>>>>> Bueno probe tanto comentandolo como colocando la opcion No, y el
>>>>>> resultado es el mismo abajo el dahdi_cfg -vvvv
>>>>>>
>>>>>>
>>>>>> [root at voipserver ~]# dahdi_cfg -vvvv
>>>>>> DAHDI Tools Version - 2.3.0
>>>>>>
>>>>>> DAHDI Version: 2.2.0.2
>>>>>> Echo Canceller(s): MG2
>>>>>> Configuration
>>>>>> ======================
>>>>>>
>>>>>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>>>>
>>>>>> Channel map:
>>>>>>
>>>>>> Channel 01: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 01)
>>>>>> Channel 02: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 02)
>>>>>> Channel 03: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 03)
>>>>>> Channel 04: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 04)
>>>>>> Channel 05: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 05)
>>>>>> Channel 06: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 06)
>>>>>> Channel 07: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 07)
>>>>>> Channel 08: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 08)
>>>>>> Channel 09: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 09)
>>>>>> Channel 10: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 10)
>>>>>> Channel 11: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 11)
>>>>>> Channel 12: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 12)
>>>>>> Channel 13: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 13)
>>>>>> Channel 14: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 14)
>>>>>> Channel 15: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 15)
>>>>>> Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
>>>>>> Channel 17: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 17)
>>>>>> Channel 18: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 18)
>>>>>> Channel 19: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 19)
>>>>>> Channel 20: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 20)
>>>>>> Channel 21: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 21)
>>>>>> Channel 22: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 22)
>>>>>> Channel 23: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 23)
>>>>>> Channel 24: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 24)
>>>>>> Channel 25: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 25)
>>>>>> Channel 26: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 26)
>>>>>> Channel 27: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 27)
>>>>>> Channel 28: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 28)
>>>>>> Channel 29: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 29)
>>>>>> Channel 30: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 30)
>>>>>> Channel 31: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 31)
>>>>>>
>>>>>> 31 channels to configure.
>>>>>>
>>>>>> Setting echocan for channel 1 to mg2
>>>>>> Setting echocan for channel 2 to mg2
>>>>>> Setting echocan for channel 3 to mg2
>>>>>> Setting echocan for channel 4 to mg2
>>>>>> Setting echocan for channel 5 to mg2
>>>>>> Setting echocan for channel 6 to mg2
>>>>>> Setting echocan for channel 7 to mg2
>>>>>> Setting echocan for channel 8 to mg2
>>>>>> Setting echocan for channel 9 to mg2
>>>>>> Setting echocan for channel 10 to mg2
>>>>>> Setting echocan for channel 11 to mg2
>>>>>> Setting echocan for channel 12 to mg2
>>>>>> Setting echocan for channel 13 to mg2
>>>>>> Setting echocan for channel 14 to mg2
>>>>>> Setting echocan for channel 15 to mg2
>>>>>> Setting echocan for channel 16 to none
>>>>>> Setting echocan for channel 17 to mg2
>>>>>> Setting echocan for channel 18 to mg2
>>>>>> Setting echocan for channel 19 to mg2
>>>>>> Setting echocan for channel 20 to mg2
>>>>>> Setting echocan for channel 21 to mg2
>>>>>> Setting echocan for channel 22 to mg2
>>>>>> Setting echocan for channel 23 to mg2
>>>>>> Setting echocan for channel 24 to mg2
>>>>>> Setting echocan for channel 25 to mg2
>>>>>> Setting echocan for channel 26 to mg2
>>>>>> Setting echocan for channel 27 to mg2
>>>>>> Setting echocan for channel 28 to mg2
>>>>>> Setting echocan for channel 29 to mg2
>>>>>> Setting echocan for channel 30 to mg2
>>>>>> Setting echocan for channel 31 to mg2
>>>>>>
>>>>>>
>>>>>> --
>>>>>> *Jose Daniel Yribarren C*
>>>>>> *Soporte Tecnico
>>>>>>
>>>>>> **Compusan C.A**
>>>>>> *J-31585717-0
>>>>>>
>>>>>>
>>>>>> Av Bolivar Sector La Yaguara, Galpon G-02,
>>>>>> San Carlos, Edo Cojedes, Venezuela
>>>>>> 0258-4337811 0426 5468037
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> _____________________________________________________________________
>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>>
>>>>>> asterisk-r2 mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-r2 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> *Jose Daniel Yribarren C*
>>>> *Soporte Tecnico
>>>>
>>>> **Compusan C.A**
>>>> *J-31585717-0
>>>>
>>>>
>>>> Av Bolivar Sector La Yaguara, Galpon G-02,
>>>> San Carlos, Edo Cojedes, Venezuela
>>>> 0258-4337811 0426 5468037
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> *Jose Daniel Yribarren C*
>>> *Soporte Tecnico
>>>
>>> **Compusan C.A**
>>> *J-31585717-0
>>>
>>>
>>> Av Bolivar Sector La Yaguara, Galpon G-02,
>>> San Carlos, Edo Cojedes, Venezuela
>>> 0258-4337811 0426 5468037
>>>
>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
>
> --
> *Jose Daniel Yribarren C*
> *Soporte Tecnico
>
> **Compusan C.A**
> *J-31585717-0
>
>
> Av Bolivar Sector La Yaguara, Galpon G-02,
> San Carlos, Edo Cojedes, Venezuela
> 0258-4337811 0426 5468037
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120527/0fd589f7/attachment-0001.htm>
More information about the asterisk-r2
mailing list