[asterisk-r2] CID entrante en E1 CANTV
Rabih R. Bou Orm A.
rabihbouorm at gmail.com
Sun May 27 11:45:22 CDT 2012
Olvide comentarte que las Sangoma siempre han tenido un desempeño
increible. Las recomiendo sobre cualquier otra cosa si las pueden costear.
El 27 de mayo de 2012 12:14, Rabih R. Bou Orm A.
<rabihbouorm at gmail.com>escribió:
> Esta combinación ha sido excelente para mi:
>
> Dahdi 2.4.1.2
> Asterisk 1.4.39.1
> OpenR2 1.3.2
>
> Si quieres utiliza una PC como media Gateway para recibir el E1 y
> conectalo a un Elastix 2.3.0 por IAX2 para que la IP-PBX sea amigable al
> administrador de la red.
>
> Saludos,
> RB.
>
>
>
> 2012/5/27 Jose Daniel Yribarren <jdyribarren at compusan.com.ve>
>
>> gracias amigo, en unos dias instalare otro servidor de este tipo y vere
>> si funciona el cid, si no lo hace entonces revisare mas a fondo...
>>
>> 2012/5/27 Rabih R. Bou Orm A. <rabihbouorm at gmail.com>
>>
>> Jose Daniel,
>>>
>>> Siento no poder ayudarte mas, porque en las configuraciones también he
>>> notado que has jugado con get_ani_first ... mi configuración funcional para
>>> entrantes con DTMF-R2 ha sido la siguiente:
>>>
>>> context=from-pstn
>>> group=2
>>> signalling=mfcr2
>>> mfcr2_variant=ve
>>> mfcr2_dtmf_detection=0
>>> mfcr2_dtmf_dialing=0
>>> mfcr2_get_ani_first=yes
>>> mfcr2_immediate_accept=no
>>> mfcr2_max_ani=11
>>> mfcr2_max_dnis=4
>>> mfcr2_mfback_timeout=3000
>>> channel => 32-46
>>>
>>> Atentamente,
>>> RB.
>>>
>>> 2012/5/26 Jose Daniel Yribarren <jdyribarren at compusan.com.ve>
>>>
>>>> lo mas curioso es que mande a guardar los log entrante en otra carpeta
>>>> cantv2, se creo la carpeta pero no hay archivos de las llamadas que
>>>> recibo......
>>>>
>>>> raro
>>>>
>>>>
>>>> 2012/5/26 Jose Daniel Yribarren <jdyribarren at compusan.com.ve>
>>>>
>>>>> je y no has visto nada, reviso log y solo veo los de llamadas
>>>>> salientes, no de entrantes....
>>>>> pero tome eso tel cli
>>>>>
>>>>> New MFC/R2 call detected on chan 1.
>>>>> MFC/R2 call offered on chan 1. ANI = (restricted), DNIS = 400,
>>>>> Category = National Subscriber
>>>>> MFC/R2 call has been accepted on backward channel 1
>>>>> -- Executing [400 at from-pstn:1] Set("DAHDI/1-1", "__FROM_DID=400")
>>>>> in new stack
>>>>> -- Executing [400 at from-pstn:2] Gosub("DAHDI/1-1",
>>>>> "app-blacklist-check|s|1") in new stack
>>>>> -- Executing [s at app-blacklist-check:1]
>>>>> LookupBlacklist("DAHDI/1-1", "") in new stack
>>>>> -- Executing [s at app-blacklist-check:2] GotoIf("DAHDI/1-1",
>>>>> "0?blacklisted") in new stack
>>>>> -- Executing [s at app-blacklist-check:3] Return("DAHDI/1-1", "") in
>>>>> new stack
>>>>> -- Executing [400 at from-pstn:3] ExecIf("DAHDI/1-1", "1
>>>>> |Set|CALLERID(name)=") in new stack
>>>>> -- Executing [400 at from-pstn:4] Set("DAHDI/1-1",
>>>>> "FAX_RX=disabled") in new stack
>>>>> -- Executing [400 at from-pstn:5] Set("DAHDI/1-1",
>>>>> "__CALLINGPRES_SV=allowed_not_screened") in new stack
>>>>> -- Executing [400 at from-pstn:6] SetCallerPres("DAHDI/1-1",
>>>>> "allowed_not_screened") in new stack
>>>>> -- Executing [400 at from-pstn:7] Goto("DAHDI/1-1", "ivr-12|s|1") in
>>>>> new stack
>>>>> -- Goto (ivr-12,s,1)
>>>>> -- Executing [s at ivr-12:1] Set("DAHDI/1-1",
>>>>> "MSG=custom/ivrprincipal") in new stack
>>>>> -- Executing [s at ivr-12:2] Set("DAHDI/1-1", "LOOPCOUNT=0") in new
>>>>> stack
>>>>> -- Executing [s at ivr-12:3] Set("DAHDI/1-1",
>>>>> "__DIR-CONTEXT=default") in new stack
>>>>> -- Executing [s at ivr-12:4] Set("DAHDI/1-1",
>>>>> "_IVR_CONTEXT_ivr-12=") in new stack
>>>>> -- Executing [s at ivr-12:5] Set("DAHDI/1-1", "_IVR_CONTEXT=ivr-12")
>>>>> in new stack
>>>>> -- Executing [s at ivr-12:6] GotoIf("DAHDI/1-1", "0?begin") in new
>>>>> stack
>>>>> -- Executing [s at ivr-12:7] Answer("DAHDI/1-1", "") in new stack
>>>>> -- Executing [s at ivr-12:8] Wait("DAHDI/1-1", "1") in new stack
>>>>> -- Executing [s at ivr-12:9] Set("DAHDI/1-1", "TIMEOUT(digit)=3") in
>>>>> new stack
>>>>> -- Digit timeout set to 3
>>>>> -- Executing [s at ivr-12:10] Set("DAHDI/1-1",
>>>>> "TIMEOUT(response)=10") in new stack
>>>>> -- Response timeout set to 10
>>>>> -- Executing [s at ivr-12:11] Set("DAHDI/1-1", "__IVR_RETVM=") in
>>>>> new stack
>>>>> -- Executing [s at ivr-12:12] ExecIf("DAHDI/1-1",
>>>>> "1|Background|custom/ivrprincipal") in new stack
>>>>> -- <DAHDI/1-1> Playing 'custom/ivrprincipal' (language 'es')
>>>>> Chan 1 - Far end disconnected. Reason: Normal Clearing
>>>>> MFC/R2 call disconnected on chan 1
>>>>> == Spawn extension (ivr-12, s, 12) exited non-zero on 'DAHDI/1-1'
>>>>> -- Executing [h at ivr-12:1] Hangup("DAHDI/1-1", "") in new stack
>>>>> == Spawn extension (ivr-12, h, 1) exited non-zero on 'DAHDI/1-1'
>>>>> MFC/R2 call end on chan 1
>>>>> -- Hungup 'DAHDI/1-1'
>>>>> voipserver*CLI>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> El 26 de mayo de 2012 17:54, Rabih R. Bou Orm A. <
>>>>> rabihbouorm at gmail.com> escribió:
>>>>>
>>>>> Curioso,
>>>>>>
>>>>>> El log de la llamada entrante que dice? No te envia nada?
>>>>>>
>>>>>> El 26 de mayo de 2012 17:52, Jose Daniel Yribarren <
>>>>>> jdyribarren at compusan.com.ve> escribió:
>>>>>>
>>>>>>> Bueno probe tanto comentandolo como colocando la opcion No, y el
>>>>>>> resultado es el mismo abajo el dahdi_cfg -vvvv
>>>>>>>
>>>>>>>
>>>>>>> [root at voipserver ~]# dahdi_cfg -vvvv
>>>>>>> DAHDI Tools Version - 2.3.0
>>>>>>>
>>>>>>> DAHDI Version: 2.2.0.2
>>>>>>> Echo Canceller(s): MG2
>>>>>>> Configuration
>>>>>>> ======================
>>>>>>>
>>>>>>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>>>>>
>>>>>>> Channel map:
>>>>>>>
>>>>>>> Channel 01: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 01)
>>>>>>> Channel 02: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 02)
>>>>>>> Channel 03: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 03)
>>>>>>> Channel 04: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 04)
>>>>>>> Channel 05: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 05)
>>>>>>> Channel 06: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 06)
>>>>>>> Channel 07: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 07)
>>>>>>> Channel 08: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 08)
>>>>>>> Channel 09: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 09)
>>>>>>> Channel 10: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 10)
>>>>>>> Channel 11: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 11)
>>>>>>> Channel 12: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 12)
>>>>>>> Channel 13: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 13)
>>>>>>> Channel 14: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 14)
>>>>>>> Channel 15: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 15)
>>>>>>> Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
>>>>>>> Channel 17: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 17)
>>>>>>> Channel 18: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 18)
>>>>>>> Channel 19: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 19)
>>>>>>> Channel 20: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 20)
>>>>>>> Channel 21: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 21)
>>>>>>> Channel 22: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 22)
>>>>>>> Channel 23: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 23)
>>>>>>> Channel 24: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 24)
>>>>>>> Channel 25: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 25)
>>>>>>> Channel 26: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 26)
>>>>>>> Channel 27: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 27)
>>>>>>> Channel 28: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 28)
>>>>>>> Channel 29: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 29)
>>>>>>> Channel 30: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 30)
>>>>>>> Channel 31: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 31)
>>>>>>>
>>>>>>> 31 channels to configure.
>>>>>>>
>>>>>>> Setting echocan for channel 1 to mg2
>>>>>>> Setting echocan for channel 2 to mg2
>>>>>>> Setting echocan for channel 3 to mg2
>>>>>>> Setting echocan for channel 4 to mg2
>>>>>>> Setting echocan for channel 5 to mg2
>>>>>>> Setting echocan for channel 6 to mg2
>>>>>>> Setting echocan for channel 7 to mg2
>>>>>>> Setting echocan for channel 8 to mg2
>>>>>>> Setting echocan for channel 9 to mg2
>>>>>>> Setting echocan for channel 10 to mg2
>>>>>>> Setting echocan for channel 11 to mg2
>>>>>>> Setting echocan for channel 12 to mg2
>>>>>>> Setting echocan for channel 13 to mg2
>>>>>>> Setting echocan for channel 14 to mg2
>>>>>>> Setting echocan for channel 15 to mg2
>>>>>>> Setting echocan for channel 16 to none
>>>>>>> Setting echocan for channel 17 to mg2
>>>>>>> Setting echocan for channel 18 to mg2
>>>>>>> Setting echocan for channel 19 to mg2
>>>>>>> Setting echocan for channel 20 to mg2
>>>>>>> Setting echocan for channel 21 to mg2
>>>>>>> Setting echocan for channel 22 to mg2
>>>>>>> Setting echocan for channel 23 to mg2
>>>>>>> Setting echocan for channel 24 to mg2
>>>>>>> Setting echocan for channel 25 to mg2
>>>>>>> Setting echocan for channel 26 to mg2
>>>>>>> Setting echocan for channel 27 to mg2
>>>>>>> Setting echocan for channel 28 to mg2
>>>>>>> Setting echocan for channel 29 to mg2
>>>>>>> Setting echocan for channel 30 to mg2
>>>>>>> Setting echocan for channel 31 to mg2
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> *Jose Daniel Yribarren C*
>>>>>>> *Soporte Tecnico
>>>>>>>
>>>>>>> **Compusan C.A**
>>>>>>> *J-31585717-0
>>>>>>>
>>>>>>>
>>>>>>> Av Bolivar Sector La Yaguara, Galpon G-02,
>>>>>>> San Carlos, Edo Cojedes, Venezuela
>>>>>>> 0258-4337811 0426 5468037
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> _____________________________________________________________________
>>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>>
>>>>>>> asterisk-r2 mailing list
>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> _____________________________________________________________________
>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>>
>>>>>> asterisk-r2 mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> *Jose Daniel Yribarren C*
>>>>> *Soporte Tecnico
>>>>>
>>>>> **Compusan C.A**
>>>>> *J-31585717-0
>>>>>
>>>>>
>>>>> Av Bolivar Sector La Yaguara, Galpon G-02,
>>>>> San Carlos, Edo Cojedes, Venezuela
>>>>> 0258-4337811 0426 5468037
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> *Jose Daniel Yribarren C*
>>>> *Soporte Tecnico
>>>>
>>>> **Compusan C.A**
>>>> *J-31585717-0
>>>>
>>>>
>>>> Av Bolivar Sector La Yaguara, Galpon G-02,
>>>> San Carlos, Edo Cojedes, Venezuela
>>>> 0258-4337811 0426 5468037
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>>
>> --
>> *Jose Daniel Yribarren C*
>> *Soporte Tecnico
>>
>> **Compusan C.A**
>> *J-31585717-0
>>
>>
>> Av Bolivar Sector La Yaguara, Galpon G-02,
>> San Carlos, Edo Cojedes, Venezuela
>> 0258-4337811 0426 5468037
>>
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120527/7580d837/attachment-0001.htm>
More information about the asterisk-r2
mailing list