[asterisk-r2] CID entrante en E1 CANTV
Jose Daniel Yribarren
jdyribarren at compusan.com.ve
Sun May 27 11:26:38 CDT 2012
gracias amigo, en unos dias instalare otro servidor de este tipo y vere si
funciona el cid, si no lo hace entonces revisare mas a fondo...
2012/5/27 Rabih R. Bou Orm A. <rabihbouorm at gmail.com>
> Jose Daniel,
>
> Siento no poder ayudarte mas, porque en las configuraciones también he
> notado que has jugado con get_ani_first ... mi configuración funcional para
> entrantes con DTMF-R2 ha sido la siguiente:
>
> context=from-pstn
> group=2
> signalling=mfcr2
> mfcr2_variant=ve
> mfcr2_dtmf_detection=0
> mfcr2_dtmf_dialing=0
> mfcr2_get_ani_first=yes
> mfcr2_immediate_accept=no
> mfcr2_max_ani=11
> mfcr2_max_dnis=4
> mfcr2_mfback_timeout=3000
> channel => 32-46
>
> Atentamente,
> RB.
>
> 2012/5/26 Jose Daniel Yribarren <jdyribarren at compusan.com.ve>
>
>> lo mas curioso es que mande a guardar los log entrante en otra carpeta
>> cantv2, se creo la carpeta pero no hay archivos de las llamadas que
>> recibo......
>>
>> raro
>>
>>
>> 2012/5/26 Jose Daniel Yribarren <jdyribarren at compusan.com.ve>
>>
>>> je y no has visto nada, reviso log y solo veo los de llamadas salientes,
>>> no de entrantes....
>>> pero tome eso tel cli
>>>
>>> New MFC/R2 call detected on chan 1.
>>> MFC/R2 call offered on chan 1. ANI = (restricted), DNIS = 400, Category
>>> = National Subscriber
>>> MFC/R2 call has been accepted on backward channel 1
>>> -- Executing [400 at from-pstn:1] Set("DAHDI/1-1", "__FROM_DID=400")
>>> in new stack
>>> -- Executing [400 at from-pstn:2] Gosub("DAHDI/1-1",
>>> "app-blacklist-check|s|1") in new stack
>>> -- Executing [s at app-blacklist-check:1] LookupBlacklist("DAHDI/1-1",
>>> "") in new stack
>>> -- Executing [s at app-blacklist-check:2] GotoIf("DAHDI/1-1",
>>> "0?blacklisted") in new stack
>>> -- Executing [s at app-blacklist-check:3] Return("DAHDI/1-1", "") in
>>> new stack
>>> -- Executing [400 at from-pstn:3] ExecIf("DAHDI/1-1", "1
>>> |Set|CALLERID(name)=") in new stack
>>> -- Executing [400 at from-pstn:4] Set("DAHDI/1-1", "FAX_RX=disabled")
>>> in new stack
>>> -- Executing [400 at from-pstn:5] Set("DAHDI/1-1",
>>> "__CALLINGPRES_SV=allowed_not_screened") in new stack
>>> -- Executing [400 at from-pstn:6] SetCallerPres("DAHDI/1-1",
>>> "allowed_not_screened") in new stack
>>> -- Executing [400 at from-pstn:7] Goto("DAHDI/1-1", "ivr-12|s|1") in
>>> new stack
>>> -- Goto (ivr-12,s,1)
>>> -- Executing [s at ivr-12:1] Set("DAHDI/1-1",
>>> "MSG=custom/ivrprincipal") in new stack
>>> -- Executing [s at ivr-12:2] Set("DAHDI/1-1", "LOOPCOUNT=0") in new
>>> stack
>>> -- Executing [s at ivr-12:3] Set("DAHDI/1-1", "__DIR-CONTEXT=default")
>>> in new stack
>>> -- Executing [s at ivr-12:4] Set("DAHDI/1-1", "_IVR_CONTEXT_ivr-12=")
>>> in new stack
>>> -- Executing [s at ivr-12:5] Set("DAHDI/1-1", "_IVR_CONTEXT=ivr-12")
>>> in new stack
>>> -- Executing [s at ivr-12:6] GotoIf("DAHDI/1-1", "0?begin") in new
>>> stack
>>> -- Executing [s at ivr-12:7] Answer("DAHDI/1-1", "") in new stack
>>> -- Executing [s at ivr-12:8] Wait("DAHDI/1-1", "1") in new stack
>>> -- Executing [s at ivr-12:9] Set("DAHDI/1-1", "TIMEOUT(digit)=3") in
>>> new stack
>>> -- Digit timeout set to 3
>>> -- Executing [s at ivr-12:10] Set("DAHDI/1-1", "TIMEOUT(response)=10")
>>> in new stack
>>> -- Response timeout set to 10
>>> -- Executing [s at ivr-12:11] Set("DAHDI/1-1", "__IVR_RETVM=") in new
>>> stack
>>> -- Executing [s at ivr-12:12] ExecIf("DAHDI/1-1",
>>> "1|Background|custom/ivrprincipal") in new stack
>>> -- <DAHDI/1-1> Playing 'custom/ivrprincipal' (language 'es')
>>> Chan 1 - Far end disconnected. Reason: Normal Clearing
>>> MFC/R2 call disconnected on chan 1
>>> == Spawn extension (ivr-12, s, 12) exited non-zero on 'DAHDI/1-1'
>>> -- Executing [h at ivr-12:1] Hangup("DAHDI/1-1", "") in new stack
>>> == Spawn extension (ivr-12, h, 1) exited non-zero on 'DAHDI/1-1'
>>> MFC/R2 call end on chan 1
>>> -- Hungup 'DAHDI/1-1'
>>> voipserver*CLI>
>>>
>>>
>>>
>>>
>>> El 26 de mayo de 2012 17:54, Rabih R. Bou Orm A. <rabihbouorm at gmail.com>escribió:
>>>
>>> Curioso,
>>>>
>>>> El log de la llamada entrante que dice? No te envia nada?
>>>>
>>>> El 26 de mayo de 2012 17:52, Jose Daniel Yribarren <
>>>> jdyribarren at compusan.com.ve> escribió:
>>>>
>>>>> Bueno probe tanto comentandolo como colocando la opcion No, y el
>>>>> resultado es el mismo abajo el dahdi_cfg -vvvv
>>>>>
>>>>>
>>>>> [root at voipserver ~]# dahdi_cfg -vvvv
>>>>> DAHDI Tools Version - 2.3.0
>>>>>
>>>>> DAHDI Version: 2.2.0.2
>>>>> Echo Canceller(s): MG2
>>>>> Configuration
>>>>> ======================
>>>>>
>>>>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>>>
>>>>> Channel map:
>>>>>
>>>>> Channel 01: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 01)
>>>>> Channel 02: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 02)
>>>>> Channel 03: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 03)
>>>>> Channel 04: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 04)
>>>>> Channel 05: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 05)
>>>>> Channel 06: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 06)
>>>>> Channel 07: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 07)
>>>>> Channel 08: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 08)
>>>>> Channel 09: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 09)
>>>>> Channel 10: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 10)
>>>>> Channel 11: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 11)
>>>>> Channel 12: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 12)
>>>>> Channel 13: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 13)
>>>>> Channel 14: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 14)
>>>>> Channel 15: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 15)
>>>>> Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
>>>>> Channel 17: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 17)
>>>>> Channel 18: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 18)
>>>>> Channel 19: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 19)
>>>>> Channel 20: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 20)
>>>>> Channel 21: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 21)
>>>>> Channel 22: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 22)
>>>>> Channel 23: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 23)
>>>>> Channel 24: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 24)
>>>>> Channel 25: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 25)
>>>>> Channel 26: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 26)
>>>>> Channel 27: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 27)
>>>>> Channel 28: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 28)
>>>>> Channel 29: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 29)
>>>>> Channel 30: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 30)
>>>>> Channel 31: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 31)
>>>>>
>>>>> 31 channels to configure.
>>>>>
>>>>> Setting echocan for channel 1 to mg2
>>>>> Setting echocan for channel 2 to mg2
>>>>> Setting echocan for channel 3 to mg2
>>>>> Setting echocan for channel 4 to mg2
>>>>> Setting echocan for channel 5 to mg2
>>>>> Setting echocan for channel 6 to mg2
>>>>> Setting echocan for channel 7 to mg2
>>>>> Setting echocan for channel 8 to mg2
>>>>> Setting echocan for channel 9 to mg2
>>>>> Setting echocan for channel 10 to mg2
>>>>> Setting echocan for channel 11 to mg2
>>>>> Setting echocan for channel 12 to mg2
>>>>> Setting echocan for channel 13 to mg2
>>>>> Setting echocan for channel 14 to mg2
>>>>> Setting echocan for channel 15 to mg2
>>>>> Setting echocan for channel 16 to none
>>>>> Setting echocan for channel 17 to mg2
>>>>> Setting echocan for channel 18 to mg2
>>>>> Setting echocan for channel 19 to mg2
>>>>> Setting echocan for channel 20 to mg2
>>>>> Setting echocan for channel 21 to mg2
>>>>> Setting echocan for channel 22 to mg2
>>>>> Setting echocan for channel 23 to mg2
>>>>> Setting echocan for channel 24 to mg2
>>>>> Setting echocan for channel 25 to mg2
>>>>> Setting echocan for channel 26 to mg2
>>>>> Setting echocan for channel 27 to mg2
>>>>> Setting echocan for channel 28 to mg2
>>>>> Setting echocan for channel 29 to mg2
>>>>> Setting echocan for channel 30 to mg2
>>>>> Setting echocan for channel 31 to mg2
>>>>>
>>>>>
>>>>> --
>>>>> *Jose Daniel Yribarren C*
>>>>> *Soporte Tecnico
>>>>>
>>>>> **Compusan C.A**
>>>>> *J-31585717-0
>>>>>
>>>>>
>>>>> Av Bolivar Sector La Yaguara, Galpon G-02,
>>>>> San Carlos, Edo Cojedes, Venezuela
>>>>> 0258-4337811 0426 5468037
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-r2 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>
>>>
>>>
>>> --
>>> *Jose Daniel Yribarren C*
>>> *Soporte Tecnico
>>>
>>> **Compusan C.A**
>>> *J-31585717-0
>>>
>>>
>>> Av Bolivar Sector La Yaguara, Galpon G-02,
>>> San Carlos, Edo Cojedes, Venezuela
>>> 0258-4337811 0426 5468037
>>>
>>>
>>>
>>>
>>
>>
>> --
>> *Jose Daniel Yribarren C*
>> *Soporte Tecnico
>>
>> **Compusan C.A**
>> *J-31585717-0
>>
>>
>> Av Bolivar Sector La Yaguara, Galpon G-02,
>> San Carlos, Edo Cojedes, Venezuela
>> 0258-4337811 0426 5468037
>>
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
--
*Jose Daniel Yribarren C*
*Soporte Tecnico
**Compusan C.A**
*J-31585717-0
Av Bolivar Sector La Yaguara, Galpon G-02,
San Carlos, Edo Cojedes, Venezuela
0258-4337811 0426 5468037
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120527/0a71c69e/attachment-0001.htm>
More information about the asterisk-r2
mailing list