[asterisk-r2] CID entrante en E1 CANTV
Rabih R. Bou Orm A.
rabihbouorm at gmail.com
Sun May 27 11:23:27 CDT 2012
Jose Daniel,
Siento no poder ayudarte mas, porque en las configuraciones también he
notado que has jugado con get_ani_first ... mi configuración funcional para
entrantes con DTMF-R2 ha sido la siguiente:
context=from-pstn
group=2
signalling=mfcr2
mfcr2_variant=ve
mfcr2_dtmf_detection=0
mfcr2_dtmf_dialing=0
mfcr2_get_ani_first=yes
mfcr2_immediate_accept=no
mfcr2_max_ani=11
mfcr2_max_dnis=4
mfcr2_mfback_timeout=3000
channel => 32-46
Atentamente,
RB.
2012/5/26 Jose Daniel Yribarren <jdyribarren at compusan.com.ve>
> lo mas curioso es que mande a guardar los log entrante en otra carpeta
> cantv2, se creo la carpeta pero no hay archivos de las llamadas que
> recibo......
>
> raro
>
>
> 2012/5/26 Jose Daniel Yribarren <jdyribarren at compusan.com.ve>
>
>> je y no has visto nada, reviso log y solo veo los de llamadas salientes,
>> no de entrantes....
>> pero tome eso tel cli
>>
>> New MFC/R2 call detected on chan 1.
>> MFC/R2 call offered on chan 1. ANI = (restricted), DNIS = 400, Category =
>> National Subscriber
>> MFC/R2 call has been accepted on backward channel 1
>> -- Executing [400 at from-pstn:1] Set("DAHDI/1-1", "__FROM_DID=400") in
>> new stack
>> -- Executing [400 at from-pstn:2] Gosub("DAHDI/1-1",
>> "app-blacklist-check|s|1") in new stack
>> -- Executing [s at app-blacklist-check:1] LookupBlacklist("DAHDI/1-1",
>> "") in new stack
>> -- Executing [s at app-blacklist-check:2] GotoIf("DAHDI/1-1",
>> "0?blacklisted") in new stack
>> -- Executing [s at app-blacklist-check:3] Return("DAHDI/1-1", "") in
>> new stack
>> -- Executing [400 at from-pstn:3] ExecIf("DAHDI/1-1", "1
>> |Set|CALLERID(name)=") in new stack
>> -- Executing [400 at from-pstn:4] Set("DAHDI/1-1", "FAX_RX=disabled")
>> in new stack
>> -- Executing [400 at from-pstn:5] Set("DAHDI/1-1",
>> "__CALLINGPRES_SV=allowed_not_screened") in new stack
>> -- Executing [400 at from-pstn:6] SetCallerPres("DAHDI/1-1",
>> "allowed_not_screened") in new stack
>> -- Executing [400 at from-pstn:7] Goto("DAHDI/1-1", "ivr-12|s|1") in
>> new stack
>> -- Goto (ivr-12,s,1)
>> -- Executing [s at ivr-12:1] Set("DAHDI/1-1",
>> "MSG=custom/ivrprincipal") in new stack
>> -- Executing [s at ivr-12:2] Set("DAHDI/1-1", "LOOPCOUNT=0") in new
>> stack
>> -- Executing [s at ivr-12:3] Set("DAHDI/1-1", "__DIR-CONTEXT=default")
>> in new stack
>> -- Executing [s at ivr-12:4] Set("DAHDI/1-1", "_IVR_CONTEXT_ivr-12=")
>> in new stack
>> -- Executing [s at ivr-12:5] Set("DAHDI/1-1", "_IVR_CONTEXT=ivr-12") in
>> new stack
>> -- Executing [s at ivr-12:6] GotoIf("DAHDI/1-1", "0?begin") in new stack
>> -- Executing [s at ivr-12:7] Answer("DAHDI/1-1", "") in new stack
>> -- Executing [s at ivr-12:8] Wait("DAHDI/1-1", "1") in new stack
>> -- Executing [s at ivr-12:9] Set("DAHDI/1-1", "TIMEOUT(digit)=3") in
>> new stack
>> -- Digit timeout set to 3
>> -- Executing [s at ivr-12:10] Set("DAHDI/1-1", "TIMEOUT(response)=10")
>> in new stack
>> -- Response timeout set to 10
>> -- Executing [s at ivr-12:11] Set("DAHDI/1-1", "__IVR_RETVM=") in new
>> stack
>> -- Executing [s at ivr-12:12] ExecIf("DAHDI/1-1",
>> "1|Background|custom/ivrprincipal") in new stack
>> -- <DAHDI/1-1> Playing 'custom/ivrprincipal' (language 'es')
>> Chan 1 - Far end disconnected. Reason: Normal Clearing
>> MFC/R2 call disconnected on chan 1
>> == Spawn extension (ivr-12, s, 12) exited non-zero on 'DAHDI/1-1'
>> -- Executing [h at ivr-12:1] Hangup("DAHDI/1-1", "") in new stack
>> == Spawn extension (ivr-12, h, 1) exited non-zero on 'DAHDI/1-1'
>> MFC/R2 call end on chan 1
>> -- Hungup 'DAHDI/1-1'
>> voipserver*CLI>
>>
>>
>>
>>
>> El 26 de mayo de 2012 17:54, Rabih R. Bou Orm A. <rabihbouorm at gmail.com>escribió:
>>
>> Curioso,
>>>
>>> El log de la llamada entrante que dice? No te envia nada?
>>>
>>> El 26 de mayo de 2012 17:52, Jose Daniel Yribarren <
>>> jdyribarren at compusan.com.ve> escribió:
>>>
>>>> Bueno probe tanto comentandolo como colocando la opcion No, y el
>>>> resultado es el mismo abajo el dahdi_cfg -vvvv
>>>>
>>>>
>>>> [root at voipserver ~]# dahdi_cfg -vvvv
>>>> DAHDI Tools Version - 2.3.0
>>>>
>>>> DAHDI Version: 2.2.0.2
>>>> Echo Canceller(s): MG2
>>>> Configuration
>>>> ======================
>>>>
>>>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>>
>>>> Channel map:
>>>>
>>>> Channel 01: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 01)
>>>> Channel 02: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 02)
>>>> Channel 03: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 03)
>>>> Channel 04: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 04)
>>>> Channel 05: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 05)
>>>> Channel 06: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 06)
>>>> Channel 07: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 07)
>>>> Channel 08: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 08)
>>>> Channel 09: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 09)
>>>> Channel 10: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 10)
>>>> Channel 11: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 11)
>>>> Channel 12: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 12)
>>>> Channel 13: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 13)
>>>> Channel 14: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 14)
>>>> Channel 15: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 15)
>>>> Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
>>>> Channel 17: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 17)
>>>> Channel 18: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 18)
>>>> Channel 19: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 19)
>>>> Channel 20: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 20)
>>>> Channel 21: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 21)
>>>> Channel 22: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 22)
>>>> Channel 23: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 23)
>>>> Channel 24: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 24)
>>>> Channel 25: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 25)
>>>> Channel 26: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 26)
>>>> Channel 27: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 27)
>>>> Channel 28: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 28)
>>>> Channel 29: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 29)
>>>> Channel 30: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 30)
>>>> Channel 31: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 31)
>>>>
>>>> 31 channels to configure.
>>>>
>>>> Setting echocan for channel 1 to mg2
>>>> Setting echocan for channel 2 to mg2
>>>> Setting echocan for channel 3 to mg2
>>>> Setting echocan for channel 4 to mg2
>>>> Setting echocan for channel 5 to mg2
>>>> Setting echocan for channel 6 to mg2
>>>> Setting echocan for channel 7 to mg2
>>>> Setting echocan for channel 8 to mg2
>>>> Setting echocan for channel 9 to mg2
>>>> Setting echocan for channel 10 to mg2
>>>> Setting echocan for channel 11 to mg2
>>>> Setting echocan for channel 12 to mg2
>>>> Setting echocan for channel 13 to mg2
>>>> Setting echocan for channel 14 to mg2
>>>> Setting echocan for channel 15 to mg2
>>>> Setting echocan for channel 16 to none
>>>> Setting echocan for channel 17 to mg2
>>>> Setting echocan for channel 18 to mg2
>>>> Setting echocan for channel 19 to mg2
>>>> Setting echocan for channel 20 to mg2
>>>> Setting echocan for channel 21 to mg2
>>>> Setting echocan for channel 22 to mg2
>>>> Setting echocan for channel 23 to mg2
>>>> Setting echocan for channel 24 to mg2
>>>> Setting echocan for channel 25 to mg2
>>>> Setting echocan for channel 26 to mg2
>>>> Setting echocan for channel 27 to mg2
>>>> Setting echocan for channel 28 to mg2
>>>> Setting echocan for channel 29 to mg2
>>>> Setting echocan for channel 30 to mg2
>>>> Setting echocan for channel 31 to mg2
>>>>
>>>>
>>>> --
>>>> *Jose Daniel Yribarren C*
>>>> *Soporte Tecnico
>>>>
>>>> **Compusan C.A**
>>>> *J-31585717-0
>>>>
>>>>
>>>> Av Bolivar Sector La Yaguara, Galpon G-02,
>>>> San Carlos, Edo Cojedes, Venezuela
>>>> 0258-4337811 0426 5468037
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>>
>> --
>> *Jose Daniel Yribarren C*
>> *Soporte Tecnico
>>
>> **Compusan C.A**
>> *J-31585717-0
>>
>>
>> Av Bolivar Sector La Yaguara, Galpon G-02,
>> San Carlos, Edo Cojedes, Venezuela
>> 0258-4337811 0426 5468037
>>
>>
>>
>>
>
>
> --
> *Jose Daniel Yribarren C*
> *Soporte Tecnico
>
> **Compusan C.A**
> *J-31585717-0
>
>
> Av Bolivar Sector La Yaguara, Galpon G-02,
> San Carlos, Edo Cojedes, Venezuela
> 0258-4337811 0426 5468037
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120527/3202a093/attachment-0001.htm>
More information about the asterisk-r2
mailing list