[asterisk-r2] CID entrante en E1 CANTV
Jose Daniel Yribarren
jdyribarren at compusan.com.ve
Sat May 26 18:11:34 CDT 2012
lo mas curioso es que mande a guardar los log entrante en otra carpeta
cantv2, se creo la carpeta pero no hay archivos de las llamadas que
recibo......
raro
2012/5/26 Jose Daniel Yribarren <jdyribarren at compusan.com.ve>
> je y no has visto nada, reviso log y solo veo los de llamadas salientes,
> no de entrantes....
> pero tome eso tel cli
>
> New MFC/R2 call detected on chan 1.
> MFC/R2 call offered on chan 1. ANI = (restricted), DNIS = 400, Category =
> National Subscriber
> MFC/R2 call has been accepted on backward channel 1
> -- Executing [400 at from-pstn:1] Set("DAHDI/1-1", "__FROM_DID=400") in
> new stack
> -- Executing [400 at from-pstn:2] Gosub("DAHDI/1-1",
> "app-blacklist-check|s|1") in new stack
> -- Executing [s at app-blacklist-check:1] LookupBlacklist("DAHDI/1-1",
> "") in new stack
> -- Executing [s at app-blacklist-check:2] GotoIf("DAHDI/1-1",
> "0?blacklisted") in new stack
> -- Executing [s at app-blacklist-check:3] Return("DAHDI/1-1", "") in new
> stack
> -- Executing [400 at from-pstn:3] ExecIf("DAHDI/1-1", "1
> |Set|CALLERID(name)=") in new stack
> -- Executing [400 at from-pstn:4] Set("DAHDI/1-1", "FAX_RX=disabled") in
> new stack
> -- Executing [400 at from-pstn:5] Set("DAHDI/1-1",
> "__CALLINGPRES_SV=allowed_not_screened") in new stack
> -- Executing [400 at from-pstn:6] SetCallerPres("DAHDI/1-1",
> "allowed_not_screened") in new stack
> -- Executing [400 at from-pstn:7] Goto("DAHDI/1-1", "ivr-12|s|1") in new
> stack
> -- Goto (ivr-12,s,1)
> -- Executing [s at ivr-12:1] Set("DAHDI/1-1", "MSG=custom/ivrprincipal")
> in new stack
> -- Executing [s at ivr-12:2] Set("DAHDI/1-1", "LOOPCOUNT=0") in new stack
> -- Executing [s at ivr-12:3] Set("DAHDI/1-1", "__DIR-CONTEXT=default")
> in new stack
> -- Executing [s at ivr-12:4] Set("DAHDI/1-1", "_IVR_CONTEXT_ivr-12=") in
> new stack
> -- Executing [s at ivr-12:5] Set("DAHDI/1-1", "_IVR_CONTEXT=ivr-12") in
> new stack
> -- Executing [s at ivr-12:6] GotoIf("DAHDI/1-1", "0?begin") in new stack
> -- Executing [s at ivr-12:7] Answer("DAHDI/1-1", "") in new stack
> -- Executing [s at ivr-12:8] Wait("DAHDI/1-1", "1") in new stack
> -- Executing [s at ivr-12:9] Set("DAHDI/1-1", "TIMEOUT(digit)=3") in new
> stack
> -- Digit timeout set to 3
> -- Executing [s at ivr-12:10] Set("DAHDI/1-1", "TIMEOUT(response)=10")
> in new stack
> -- Response timeout set to 10
> -- Executing [s at ivr-12:11] Set("DAHDI/1-1", "__IVR_RETVM=") in new
> stack
> -- Executing [s at ivr-12:12] ExecIf("DAHDI/1-1",
> "1|Background|custom/ivrprincipal") in new stack
> -- <DAHDI/1-1> Playing 'custom/ivrprincipal' (language 'es')
> Chan 1 - Far end disconnected. Reason: Normal Clearing
> MFC/R2 call disconnected on chan 1
> == Spawn extension (ivr-12, s, 12) exited non-zero on 'DAHDI/1-1'
> -- Executing [h at ivr-12:1] Hangup("DAHDI/1-1", "") in new stack
> == Spawn extension (ivr-12, h, 1) exited non-zero on 'DAHDI/1-1'
> MFC/R2 call end on chan 1
> -- Hungup 'DAHDI/1-1'
> voipserver*CLI>
>
>
>
>
> El 26 de mayo de 2012 17:54, Rabih R. Bou Orm A. <rabihbouorm at gmail.com>escribió:
>
> Curioso,
>>
>> El log de la llamada entrante que dice? No te envia nada?
>>
>> El 26 de mayo de 2012 17:52, Jose Daniel Yribarren <
>> jdyribarren at compusan.com.ve> escribió:
>>
>>> Bueno probe tanto comentandolo como colocando la opcion No, y el
>>> resultado es el mismo abajo el dahdi_cfg -vvvv
>>>
>>>
>>> [root at voipserver ~]# dahdi_cfg -vvvv
>>> DAHDI Tools Version - 2.3.0
>>>
>>> DAHDI Version: 2.2.0.2
>>> Echo Canceller(s): MG2
>>> Configuration
>>> ======================
>>>
>>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>
>>> Channel map:
>>>
>>> Channel 01: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 01)
>>> Channel 02: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 02)
>>> Channel 03: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 03)
>>> Channel 04: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 04)
>>> Channel 05: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 05)
>>> Channel 06: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 06)
>>> Channel 07: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 07)
>>> Channel 08: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 08)
>>> Channel 09: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 09)
>>> Channel 10: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 10)
>>> Channel 11: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 11)
>>> Channel 12: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 12)
>>> Channel 13: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 13)
>>> Channel 14: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 14)
>>> Channel 15: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 15)
>>> Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
>>> Channel 17: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 17)
>>> Channel 18: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 18)
>>> Channel 19: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 19)
>>> Channel 20: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 20)
>>> Channel 21: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 21)
>>> Channel 22: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 22)
>>> Channel 23: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 23)
>>> Channel 24: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 24)
>>> Channel 25: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 25)
>>> Channel 26: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 26)
>>> Channel 27: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 27)
>>> Channel 28: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 28)
>>> Channel 29: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 29)
>>> Channel 30: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 30)
>>> Channel 31: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 31)
>>>
>>> 31 channels to configure.
>>>
>>> Setting echocan for channel 1 to mg2
>>> Setting echocan for channel 2 to mg2
>>> Setting echocan for channel 3 to mg2
>>> Setting echocan for channel 4 to mg2
>>> Setting echocan for channel 5 to mg2
>>> Setting echocan for channel 6 to mg2
>>> Setting echocan for channel 7 to mg2
>>> Setting echocan for channel 8 to mg2
>>> Setting echocan for channel 9 to mg2
>>> Setting echocan for channel 10 to mg2
>>> Setting echocan for channel 11 to mg2
>>> Setting echocan for channel 12 to mg2
>>> Setting echocan for channel 13 to mg2
>>> Setting echocan for channel 14 to mg2
>>> Setting echocan for channel 15 to mg2
>>> Setting echocan for channel 16 to none
>>> Setting echocan for channel 17 to mg2
>>> Setting echocan for channel 18 to mg2
>>> Setting echocan for channel 19 to mg2
>>> Setting echocan for channel 20 to mg2
>>> Setting echocan for channel 21 to mg2
>>> Setting echocan for channel 22 to mg2
>>> Setting echocan for channel 23 to mg2
>>> Setting echocan for channel 24 to mg2
>>> Setting echocan for channel 25 to mg2
>>> Setting echocan for channel 26 to mg2
>>> Setting echocan for channel 27 to mg2
>>> Setting echocan for channel 28 to mg2
>>> Setting echocan for channel 29 to mg2
>>> Setting echocan for channel 30 to mg2
>>> Setting echocan for channel 31 to mg2
>>>
>>>
>>> --
>>> *Jose Daniel Yribarren C*
>>> *Soporte Tecnico
>>>
>>> **Compusan C.A**
>>> *J-31585717-0
>>>
>>>
>>> Av Bolivar Sector La Yaguara, Galpon G-02,
>>> San Carlos, Edo Cojedes, Venezuela
>>> 0258-4337811 0426 5468037
>>>
>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
>
> --
> *Jose Daniel Yribarren C*
> *Soporte Tecnico
>
> **Compusan C.A**
> *J-31585717-0
>
>
> Av Bolivar Sector La Yaguara, Galpon G-02,
> San Carlos, Edo Cojedes, Venezuela
> 0258-4337811 0426 5468037
>
>
>
>
--
*Jose Daniel Yribarren C*
*Soporte Tecnico
**Compusan C.A**
*J-31585717-0
Av Bolivar Sector La Yaguara, Galpon G-02,
San Carlos, Edo Cojedes, Venezuela
0258-4337811 0426 5468037
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120526/26e8707b/attachment.htm>
More information about the asterisk-r2
mailing list