[asterisk-r2] CID entrante en E1 CANTV

Sat May 26 18:01:15 CDT 2012

je y no has visto nada, reviso log y solo veo los de llamadas salientes, no
de entrantes....
pero tome eso tel cli

New MFC/R2 call detected on chan 1.
MFC/R2 call offered on chan 1. ANI = (restricted), DNIS = 400, Category =
National Subscriber
MFC/R2 call has been accepted on backward channel 1
    -- Executing [400 at from-pstn:1] Set("DAHDI/1-1", "__FROM_DID=400") in
new stack
    -- Executing [400 at from-pstn:2] Gosub("DAHDI/1-1",
"app-blacklist-check|s|1") in new stack
    -- Executing [s at app-blacklist-check:1] LookupBlacklist("DAHDI/1-1", "")
in new stack
    -- Executing [s at app-blacklist-check:2] GotoIf("DAHDI/1-1",
"0?blacklisted") in new stack
    -- Executing [s at app-blacklist-check:3] Return("DAHDI/1-1", "") in new
stack
    -- Executing [400 at from-pstn:3] ExecIf("DAHDI/1-1", "1
|Set|CALLERID(name)=") in new stack
    -- Executing [400 at from-pstn:4] Set("DAHDI/1-1", "FAX_RX=disabled") in
new stack
    -- Executing [400 at from-pstn:5] Set("DAHDI/1-1",
"__CALLINGPRES_SV=allowed_not_screened") in new stack
    -- Executing [400 at from-pstn:6] SetCallerPres("DAHDI/1-1",
"allowed_not_screened") in new stack
    -- Executing [400 at from-pstn:7] Goto("DAHDI/1-1", "ivr-12|s|1") in new
stack
    -- Goto (ivr-12,s,1)
    -- Executing [s at ivr-12:1] Set("DAHDI/1-1", "MSG=custom/ivrprincipal")
in new stack
    -- Executing [s at ivr-12:2] Set("DAHDI/1-1", "LOOPCOUNT=0") in new stack
    -- Executing [s at ivr-12:3] Set("DAHDI/1-1", "__DIR-CONTEXT=default") in
new stack
    -- Executing [s at ivr-12:4] Set("DAHDI/1-1", "_IVR_CONTEXT_ivr-12=") in
new stack
    -- Executing [s at ivr-12:5] Set("DAHDI/1-1", "_IVR_CONTEXT=ivr-12") in
new stack
    -- Executing [s at ivr-12:6] GotoIf("DAHDI/1-1", "0?begin") in new stack
    -- Executing [s at ivr-12:7] Answer("DAHDI/1-1", "") in new stack
    -- Executing [s at ivr-12:8] Wait("DAHDI/1-1", "1") in new stack
    -- Executing [s at ivr-12:9] Set("DAHDI/1-1", "TIMEOUT(digit)=3") in new
stack
    -- Digit timeout set to 3
    -- Executing [s at ivr-12:10] Set("DAHDI/1-1", "TIMEOUT(response)=10") in
new stack
    -- Response timeout set to 10
    -- Executing [s at ivr-12:11] Set("DAHDI/1-1", "__IVR_RETVM=") in new stack
    -- Executing [s at ivr-12:12] ExecIf("DAHDI/1-1",
"1|Background|custom/ivrprincipal") in new stack
    -- <DAHDI/1-1> Playing 'custom/ivrprincipal' (language 'es')
Chan 1 - Far end disconnected. Reason: Normal Clearing
MFC/R2 call disconnected on chan 1
  == Spawn extension (ivr-12, s, 12) exited non-zero on 'DAHDI/1-1'
    -- Executing [h at ivr-12:1] Hangup("DAHDI/1-1", "") in new stack
  == Spawn extension (ivr-12, h, 1) exited non-zero on 'DAHDI/1-1'
MFC/R2 call end on chan 1
    -- Hungup 'DAHDI/1-1'
voipserver*CLI>

El 26 de mayo de 2012 17:54, Rabih R. Bou Orm A.
<rabihbouorm at gmail.com>escribió:

> Curioso,
>
> El log de la llamada entrante que dice? No te envia nada?
>
> El 26 de mayo de 2012 17:52, Jose Daniel Yribarren <
> jdyribarren at compusan.com.ve> escribió:
>
>> Bueno probe tanto comentandolo como colocando la opcion No, y el
>> resultado es el mismo abajo el dahdi_cfg -vvvv
>>
>>
>> [root at voipserver ~]# dahdi_cfg -vvvv
>> DAHDI Tools Version - 2.3.0
>>
>> DAHDI Version: 2.2.0.2
>> Echo Canceller(s): MG2
>> Configuration
>> ======================
>>
>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>
>> Channel map:
>>
>> Channel 01: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 01)
>> Channel 02: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 02)
>> Channel 03: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 03)
>> Channel 04: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 04)
>> Channel 05: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 05)
>> Channel 06: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 06)
>> Channel 07: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 07)
>> Channel 08: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 08)
>> Channel 09: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 09)
>> Channel 10: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 10)
>> Channel 11: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 11)
>> Channel 12: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 12)
>> Channel 13: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 13)
>> Channel 14: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 14)
>> Channel 15: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 15)
>> Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
>> Channel 17: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 17)
>> Channel 18: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 18)
>> Channel 19: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 19)
>> Channel 20: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 20)
>> Channel 21: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 21)
>> Channel 22: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 22)
>> Channel 23: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 23)
>> Channel 24: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 24)
>> Channel 25: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 25)
>> Channel 26: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 26)
>> Channel 27: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 27)
>> Channel 28: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 28)
>> Channel 29: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 29)
>> Channel 30: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 30)
>> Channel 31: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 31)
>>
>> 31 channels to configure.
>>
>> Setting echocan for channel 1 to mg2
>> Setting echocan for channel 2 to mg2
>> Setting echocan for channel 3 to mg2
>> Setting echocan for channel 4 to mg2
>> Setting echocan for channel 5 to mg2
>> Setting echocan for channel 6 to mg2
>> Setting echocan for channel 7 to mg2
>> Setting echocan for channel 8 to mg2
>> Setting echocan for channel 9 to mg2
>> Setting echocan for channel 10 to mg2
>> Setting echocan for channel 11 to mg2
>> Setting echocan for channel 12 to mg2
>> Setting echocan for channel 13 to mg2
>> Setting echocan for channel 14 to mg2
>> Setting echocan for channel 15 to mg2
>> Setting echocan for channel 16 to none
>> Setting echocan for channel 17 to mg2
>> Setting echocan for channel 18 to mg2
>> Setting echocan for channel 19 to mg2
>> Setting echocan for channel 20 to mg2
>> Setting echocan for channel 21 to mg2
>> Setting echocan for channel 22 to mg2
>> Setting echocan for channel 23 to mg2
>> Setting echocan for channel 24 to mg2
>> Setting echocan for channel 25 to mg2
>> Setting echocan for channel 26 to mg2
>> Setting echocan for channel 27 to mg2
>> Setting echocan for channel 28 to mg2
>> Setting echocan for channel 29 to mg2
>> Setting echocan for channel 30 to mg2
>> Setting echocan for channel 31 to mg2
>>
>>
>> --
>> *Jose Daniel Yribarren C*
>> *Soporte Tecnico
>>
>> **Compusan C.A**
>> *J-31585717-0
>>
>>
>> Av Bolivar Sector La Yaguara, Galpon G-02,
>> San Carlos, Edo Cojedes, Venezuela
>> 0258-4337811   0426 5468037
>>
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>

-- 
*Jose Daniel Yribarren C*
*Soporte Tecnico

**Compusan C.A**
*J-31585717-0

Av Bolivar Sector La Yaguara, Galpon G-02,
San Carlos, Edo Cojedes, Venezuela
0258-4337811   0426 5468037
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120526/cfecd2e9/attachment-0001.htm>