[asterisk-r2] asterisk integrated with Panasonic emss336

Wed Feb 29 13:54:43 CST 2012

Configure the card as clock master and see what happens.

Saludos/Regards
--
Ing. Gerardo Barajas Puente

Ingeniería | www.neocenter.com
T:+52 (55)  8590-9000 x 7003

On Wed, Feb 29, 2012 at 1:38 PM, Ricardo Pinilla <setpoint79 at yahoo.es>wrote:

> Hi, thanks foryour answer
> yes, I removed the CRC4, the plant does not synchronize against panasonic,
> the LED is red
>
> also been tested without using echocanceller = mg2 ,1-15 ,17-31
> separating
> cas=1-15,17-31:1101
>  by
> cas=1-15
> cas=17-31
>
> using other options
>
> loadzone=us
> defaultzone=us
> or
> loadzone=br
> defaultzone=br
>
> and without these options, does not work
>
> thanks
>
>
> >Message: 1
>
> >Date: Mon, 27 Feb 2012 12:02:55 -0600
> >From: Gerardo Barajas <gerardo.barajas at gmail.com>
>
> >Subject: Re: [asterisk-r2] asterisk integrated with Panasonic emss336
> >To: Ricardo Pinilla <setpointlocal at etb.net.co>,
>  >   asterisk-r2 at lists.digium.com
> >Message-ID:
>  >   <CAOQhXxGdOMN13px27Yh7WHijayNbZAfDw6WgTS_v63J=r8YVvw at mail.gmail.com>
> >Content-Type: text/plain; charset=ISO-8859-1
>
>
> >Remove you "crc4" option; restart; and try again.
>
>
> >Saludos/Regards
> >--
> >Ing. Gerardo Barajas Puente
>
> >Ingenier?a | www.neocenter.com
> >T:+52 (55)? 8590-9000 x 7003
>
>
>
>
> On Mon, Feb 27, 2012 at 11:44 AM, Ricardo Pinilla <setpoint79 at yahoo.es>
> wrote:
> > Good day, as they are, following the thread, if possible, I work with
> some
> > solution to synchronize an Asterisk 1.4.42, DAHDI Tools with Version -
> > 2.4.1, DAHDI Version: 2.4.1.2.
> > it has a card
> >
> > pci:0000:06:08.0 wct4xxp+ d161:1220 Wildcard TE220 (5th Gen)
> >
> >
> > [1]
> > active=yes
> > alarms=OK
> > description=T2XXP (PCI) Card 0 Span 1
> > name=TE2/0/1
> > manufacturer=Digium
> > devicetype=Wildcard TE220 (5th Gen) (VPMOCT064)
> > location=Board ID Switch 0
> > basechan=1
> > totchans=31
> > irq=16
> > type=digital-E1
> > syncsrc=0
> > lbo=0 db (CSU)/0-133 feet (DSX-1)
> > coding_opts=AMI,HDB3
> > framing_opts=CCS,CRC4
> > coding=HDB3
> > framing=CAS
> >
> > and the plant is a panasonic emss336
> >
> >
> > have a configuration
> >
> > /etc/dahdi/system.conf
> > # Span 1: WCT1/0 "Wildcard TE122 Card 0"
> > span=1,0,0,cas,hdb3,crc4
> > cas=1-15,17-31:1101
> > echocanceller=mg2,1-15,17-31
> > #
> > # # Global data
> > #
> > loadzone=mx
> > defaultzone=mx
> >
> >
> > chan_dahdi.conf
> > [trunkgroups]
> > ;
> > [channels]
> > usecallerid=yes
> > language=es
> > callwaiting=yes
> > usecallingpres=yes
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > canpark=yes
> > cancallforward=yes
> > callreturn=yes
> > echocancel=no
> > echocancelwhenbridged=no
> > ;
> > signalling=mfcr2
> > mfcr2_variant=ar
> > mfcr2_get_ani_first=no
> > mfcr2_max_ani=10
> > mfcr2_max_dnis=4
> > mfcr2_category=national_suscriber
> > mfcr2_logdir=span1
> > mfcr2_logging=all
> > mfcr2_call_files=yes
> > mfcr2_mfback_timeout= 5000
> > mfcr2_metering_pulse_timeout=200
> > ;
> > context=from-pstn
> > group=0
> > callgroup=0
> > pickupgroup=0
> > channel => 1-15
> > channel => 17-31
> >
> > dahdi up with this configuration
> >
> > SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> >
> > Channel map:
> >
> > Channel 01: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 01)
> > Channel 02: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 02)
> > Channel 03: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 03)
> > Channel 04: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 04)
> > Channel 05: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 05)
> > Channel 06: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 06)
> > Channel 07: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 07)
> > Channel 08: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 08)
> > Channel 09: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 09)
> > Channel 10: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 10)
> > Channel 11: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 11)
> > Channel 12: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 12)
> > Channel 13: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 13)
> > Channel 14: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 14)
> > Channel 15: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 15)
> > Channel 17: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 17)
> > Channel 18: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 18)
> > Channel 19: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 19)
> > Channel 20: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 20)
> > Channel 21: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 21)
> > Channel 22: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 22)
> > Channel 23: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 23)
> > Channel 24: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 24)
> > Channel 25: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 25)
> > Channel 26: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 26)
> > Channel 27: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 27)
> > Channel 28: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 28)
> > Channel 29: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 29)
> > Channel 30: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 30)
> > Channel 31: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 31)
> >
> > CLI> dahdi show status
> > Description Alarms IRQ bpviol CRC4
> > T2XXP (PCI) Card 0 Span 1 OK 0 0 0
> >
> > CLI> dahdi show channels
> > Chan Extension Context Language MOH Interpret
> > pseudo default default
> > 1 from-pstn es default
> > 2 from-pstn es default
> > 3 from-pstn es default
> > 4 from-pstn es default
> > 5 from-pstn es default
> > 6 from-pstn es default
> > 7 from-pstn es default
> > 8 from-pstn es default
> > 9 from-pstn es default
> > 10 from-pstn es default
> > 11 from-pstn es default
> > 12 from-pstn es default
> > 13 from-pstn es default
> > 14 from-pstn es default
> > 15 from-pstn es default
> > 17 from-pstn es default
> > 18 from-pstn es default
> > 19 from-pstn es default
> > 20 from-pstn es default
> > 21 from-pstn es default
> > 22 from-pstn es default
> > 23 from-pstn es default
> > 24 from-pstn es default
> > 25 from-pstn es default
> > 26 from-pstn es default
> > 27 from-pstn es default
> > 28 from-pstn es default
> > 29 from-pstn es default
> > 30 from-pstn es default
> > 31 from-pstn es default
> >
> >
> > but channels
> >
> > CLI> mfcr2 show channels
> > Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS Rx CAS
> > 1 AR 10 4 No No SEIZE AC SEIZE
> > 2 AR 10 4 No No SEIZE AC SEIZE
> > 3 AR 10 4 No No SEIZE AC SEIZE
> > 4 AR 10 4 No No SEIZE AC SEIZE
> > 5 AR 10 4 No No SEIZE AC SEIZE
> > 6 AR 10 4 No No SEIZE AC SEIZE
> > 7 AR 10 4 No No SEIZE AC SEIZE
> > 8 AR 10 4 No No SEIZE AC SEIZE
> > 9 AR 10 4 No No SEIZE AC SEIZE
> > 10 AR 10 4 No No SEIZE AC SEIZE
> > 11 AR 10 4 No No SEIZE AC SEIZE
> > 12 AR 10 4 No No SEIZE AC SEIZE
> > 13 AR 10 4 No No SEIZE AC SEIZE
> > 14 AR 10 4 No No SEIZE AC SEIZE
> > 15 AR 10 4 No No SEIZE AC SEIZE
> > 17 AR 10 4 No No SEIZE AC SEIZE
> > 18 AR 10 4 No No SEIZE AC SEIZE
> > 19 AR 10 4 No No SEIZE AC SEIZE
> > 20 AR 10 4 No No SEIZE AC SEIZE
> > 21 AR 10 4 No No SEIZE AC SEIZE
> > 22 AR 10 4 No No SEIZE AC SEIZE
> > 23 AR 10 4 No No SEIZE AC SEIZE
> > 24 AR 10 4 No No SEIZE AC SEIZE
> > 25 AR 10 4 No No SEIZE AC SEIZE
> > 26 AR 10 4 No No SEIZE AC SEIZE
> > 27 AR 10 4 No No SEIZE AC SEIZE
> > 28 AR 10 4 No No SEIZE AC SEIZE
> > 29 AR 10 4 No No SEIZE AC SEIZE
> > 30 AR 10 4 No No SEIZE AC SEIZE
> > 31 AR 10 4 No No SEIZE AC SEIZE
> >
> > after a while, send the following errors
> >
> > New MFC/R2 call detected on chan 12.
> > [Feb 23 12:43:00] ERROR[16995]: chan_dahdi.c:1683 dahdi_r2_write_log:
> Chan
> > 13 - Protocol error. Reason = Invalid CAS, R2 State = Idle, MF state = MF
> > Engine Off, MF Group = No Group, CAS = 0x04
> > DNIS = , ANI = , MF = 0x20
> > [Feb 23 12:43:00] ERROR[16995]: chan_dahdi.c:1455
> > dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 13: Invalid CAS
> > New MFC/R2 call detected on chan 28.
> > [Feb 23 12:43:00] ERROR[16996]: chan_dahdi.c:1683 dahdi_r2_write_log:
> Chan
> > 29 - Protocol error. Reason = Invalid CAS, R2 State = Idle, MF state = MF
> > Engine Off, MF Group = No Group, CAS = 0x04
> > DNIS = , ANI = , MF = 0x20
> > [Feb 23 12:43:00] ERROR[16996]: chan_dahdi.c:1455
> > dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 29: Invalid CAS
> >
> > Feb 23 16:41:48] ERROR[11065]: chan_dahdi.c:1683 dahdi_r2_write_log:
> Chan 25
> > - Protocol error. Reason = Invalid CAS, R2 State = Seize ACK
> Transmitted, MF
> > state = Seize ACK Transmitted, MF Group = Backward MF init, CAS = 0x0C
> > DNIS = , ANI = , MF = 0x20
> > [Feb 23 16:41:48] ERROR[11065]: chan_dahdi.c:1455
> > dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 25: Invalid CAS
> > [Feb 23 16:41:48] ERROR[11064]: chan_dahdi.c:1683 dahdi_r2_write_log:
> Chan 9
> > - Protocol error. Reason = Invalid CAS, R2 State = Seize ACK
> Transmitted, MF
> > state = Seize ACK Transmitted, MF Group = Backward MF init, CAS = 0x0C
> > DNIS = , ANI = , MF = 0x20
> > [Feb 23 16:41:48] ERROR[11064]: chan_dahdi.c:1455
> > dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 9: Invalid CAS
> >
> >
> > == Manager 'sendcron' logged off from 127.0.0.1
> > [Feb 23 15:40:32] NOTICE[1420]: chan_dahdi.c:1713 dahdi_r2_on_line_idle:
> Far
> > end unblocked on chan 29
> > [Feb 23 15:40:32] NOTICE[1420]: chan_dahdi.c:1713 dahdi_r2_on_line_idle:
> Far
> > end unblocked on chan 30
> > [Feb 23 15:40:32] NOTICE[1420]: chan_dahdi.c:1713 dahdi_r2_on_line_idle:
> Far
> > end unblocked on chan 31
> > [Feb 23 15:40:32] NOTICE[1419]: chan_dahdi.c:1713 dahdi_r2_on_line_idle:
> Far
> > end unblocked on chan 13
> > [Feb 23 15:40:32] NOTICE[1419]: chan_dahdi.c:1713 dahdi_r2_on_line_idle:
> Far
> > end unblocked on chan 14
> > [Feb 23 15:40:32] NOTICE[1419]: chan_dahdi.c:1713 dahdi_r2_on_line_idle:
> Far
> > end unblocked on chan 15
> >
> >
> > when trying to make, does not find channels
> >
> >
> > -- Executing [141 at phones:1] Answer("SIP/cc6105-00000000", "nocdr") in
> new
> > stack
> > -- Executing [141 at phones:2] Dial("SIP/cc6105-00000000",
> "Dahdi/g0/141|50")
> > in new stack
> > [Feb 23 16:01:25] WARNING[8180]: app_dial.c:1310 dial_exec_full: Unable
> to
> > create channel of type 'Dahdi' (cause 34 - Circuit/channel congestion)
> > == Everyone is busy/congested at this time (1:0/1/0)
> > -- Executing [141 at phones:3] GotoIf("SIP/cc6105-00000000",
> > "0?unavailable:hangup") in new stack
> > -- Goto (phones,141,5)
> > -- Executing [141 at phones:5] Hangup("SIP/cc6105-00000000", "") in new
> stack
> > == Spawn extension (phones, 141, 5) exited non-zero on
> 'SIP/cc6105-00000000'
> >
> >
> > [Feb 23 16:12:07] WARNING[9372]: chan_dahdi.c:1680 dahdi_r2_write_log:
> Chan
> > 12 - Seize Timeout Expired!
> > [Feb 23 16:12:07] ERROR[9372]: chan_dahdi.c:1683 dahdi_r2_write_log:
> Chan 12
> > - Protocol error. Reason = Seize Timeout, R2 State = Seize Transmitted,
> MF
> > state = MF Engine Off, MF Group = Forward MF init, CAS = 0x08
> > DNIS = 141, ANI = 6105, MF = 0x20
> > [Feb 23 16:12:07] ERROR[9372]: chan_dahdi.c:1455
> dahdi_r2_on_protocol_error:
> > MFC/R2 protocol error on chan 12: Seize Timeout
> > [Feb 23 16:12:07] WARNING[9372]: app_dial.c:801 wait_for_answer: Unable
> to
> > forward voice or dtmf
> > -- Hungup 'DAHDI/12-1'
> > == Everyone is busy/congested at this time (1:0/0/1)
> > -- Executing [141 at phones:3] GotoIf("SIP/cc6105-00000003",
> > "0?unavailable:hangup") in new stack
> > -- Goto (phones,141,5)
> > -- Executing [141 at phones:5] Hangup("SIP/cc6105-00000003", "") in new
> stack
> > == Spawn extension (phones, 141, 5) exited non-zero on
> 'SIP/cc6105-00000003'
> >
> > I appreciate any ideas
> >
> > --
> > _____________________________________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-r2 mailing list
> > To UNSUBSCRIBE or update options visit:
> > ? http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
> -
>
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120229/f8f089bd/attachment-0001.htm>