[asterisk-r2] asterisk integrated with Panasonic emss336
Mc GRATH Ricardo
mcgrathr at mail2web.com
Wed Feb 29 13:49:42 CST 2012
Dear
Panasonic KX-T336 (emss336) E1 card could be enable or disable CRC4, by the way card support only 75 ohms, it should be use adaptor.
In case have installed check wiring, you can make a loopback to check if physical connection is OK.
In case already checked please let it know.
Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com<mailto:mcgrathr at mail2web.com>
________________________________
From: asterisk-r2-bounces at lists.digium.com [asterisk-r2-bounces at lists.digium.com] On Behalf Of Ricardo Pinilla [setpoint79 at yahoo.es]
Sent: 29 February 2012 16:38
To: asterisk-r2 at lists.digium.com
Subject: Re: [asterisk-r2] asterisk integrated with Panasonic emss336
Hi, thanks foryour answer
yes, I removed the CRC4, the plant does not synchronize against panasonic, the LED is red
also been tested without using echocanceller = mg2 ,1-15 ,17-31
separating
cas=1-15,17-31:1101
by
cas=1-15
cas=17-31
using other options
loadzone=us
defaultzone=us
or
loadzone=br
defaultzone=br
and without these options, does not work
thanks
>Message: 1
>Date: Mon, 27 Feb 2012 12:02:55 -0600
>From: Gerardo Barajas <gerardo.barajas at gmail.com<mailto:gerardo.barajas at gmail.com>>
>Subject: Re: [asterisk-r2] asterisk integrated with Panasonic emss336
>To: Ricardo Pinilla <setpointlocal at etb.net.co<mailto:setpointlocal at etb.net.co>>,
> asterisk-r2 at lists.digium.com<mailto:asterisk-r2 at lists.digium.com>
>Message-ID:
> <CAOQhXxGdOMN13px27Yh7WHijayNbZAfDw6WgTS_v63J=r8YVvw at mail.gmail.com<mailto:r8YVvw at mail.gmail.com>>
>Content-Type: text/plain; charset=ISO-8859-1
>Remove you "crc4" option; restart; and try again.
>Saludos/Regards
>--
>Ing. Gerardo Barajas Puente
>Ingenier?a | www.neocenter.com
>T:+52 (55)? 8590-9000 x 7003
On Mon, Feb 27, 2012 at 11:44 AM, Ricardo Pinilla <setpoint79 at yahoo.es<mailto:setpoint79 at yahoo.es>> wrote:
> Good day, as they are, following the thread, if possible, I work with some
> solution to synchronize an Asterisk 1.4.42, DAHDI Tools with Version -
> 2.4.1, DAHDI Version: 2.4.1.2.
> it has a card
>
> pci:0000:06:08.0 wct4xxp+ d161:1220 Wildcard TE220 (5th Gen)
>
>
> [1]
> active=yes
> alarms=OK
> description=T2XXP (PCI) Card 0 Span 1
> name=TE2/0/1
> manufacturer=Digium
> devicetype=Wildcard TE220 (5th Gen) (VPMOCT064)
> location=Board ID Switch 0
> basechan=1
> totchans=31
> irq=16
> type=digital-E1
> syncsrc=0
> lbo=0 db (CSU)/0-133 feet (DSX-1)
> coding_opts=AMI,HDB3
> framing_opts=CCS,CRC4
> coding=HDB3
> framing=CAS
>
> and the plant is a panasonic emss336
>
>
> have a configuration
>
> /etc/dahdi/system.conf
> # Span 1: WCT1/0 "Wildcard TE122 Card 0"
> span=1,0,0,cas,hdb3,crc4
> cas=1-15,17-31:1101
> echocanceller=mg2,1-15,17-31
> #
> # # Global data
> #
> loadzone=mx
> defaultzone=mx
>
>
> chan_dahdi.conf
> [trunkgroups]
> ;
> [channels]
> usecallerid=yes
> language=es
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=no
> echocancelwhenbridged=no
> ;
> signalling=mfcr2
> mfcr2_variant=ar
> mfcr2_get_ani_first=no
> mfcr2_max_ani=10
> mfcr2_max_dnis=4
> mfcr2_category=national_suscriber
> mfcr2_logdir=span1
> mfcr2_logging=all
> mfcr2_call_files=yes
> mfcr2_mfback_timeout= 5000
> mfcr2_metering_pulse_timeout=200
> ;
> context=from-pstn
> group=0
> callgroup=0
> pickupgroup=0
> channel => 1-15
> channel => 17-31
>
> dahdi up with this configuration
>
> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>
> Channel map:
>
> Channel 01: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 01)
> Channel 02: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 02)
> Channel 03: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 03)
> Channel 04: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 04)
> Channel 05: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 05)
> Channel 06: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 06)
> Channel 07: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 07)
> Channel 08: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 08)
> Channel 09: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 09)
> Channel 10: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 10)
> Channel 11: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 11)
> Channel 12: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 12)
> Channel 13: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 13)
> Channel 14: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 14)
> Channel 15: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 15)
> Channel 17: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 17)
> Channel 18: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 18)
> Channel 19: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 19)
> Channel 20: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 20)
> Channel 21: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 21)
> Channel 22: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 22)
> Channel 23: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 23)
> Channel 24: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 24)
> Channel 25: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 25)
> Channel 26: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 26)
> Channel 27: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 27)
> Channel 28: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 28)
> Channel 29: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 29)
> Channel 30: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 30)
> Channel 31: CAS / User (Default) (Echo Canceler: mg2) (Slaves: 31)
>
> CLI> dahdi show status
> Description Alarms IRQ bpviol CRC4
> T2XXP (PCI) Card 0 Span 1 OK 0 0 0
>
> CLI> dahdi show channels
> Chan Extension Context Language MOH Interpret
> pseudo default default
> 1 from-pstn es default
> 2 from-pstn es default
> 3 from-pstn es default
> 4 from-pstn es default
> 5 from-pstn es default
> 6 from-pstn es default
> 7 from-pstn es default
> 8 from-pstn es default
> 9 from-pstn es default
> 10 from-pstn es default
> 11 from-pstn es default
> 12 from-pstn es default
> 13 from-pstn es default
> 14 from-pstn es default
> 15 from-pstn es default
> 17 from-pstn es default
> 18 from-pstn es default
> 19 from-pstn es default
> 20 from-pstn es default
> 21 from-pstn es default
> 22 from-pstn es default
> 23 from-pstn es default
> 24 from-pstn es default
> 25 from-pstn es default
> 26 from-pstn es default
> 27 from-pstn es default
> 28 from-pstn es default
> 29 from-pstn es default
> 30 from-pstn es default
> 31 from-pstn es default
>
>
> but channels
>
> CLI> mfcr2 show channels
> Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS Rx CAS
> 1 AR 10 4 No No SEIZE AC SEIZE
> 2 AR 10 4 No No SEIZE AC SEIZE
> 3 AR 10 4 No No SEIZE AC SEIZE
> 4 AR 10 4 No No SEIZE AC SEIZE
> 5 AR 10 4 No No SEIZE AC SEIZE
> 6 AR 10 4 No No SEIZE AC SEIZE
> 7 AR 10 4 No No SEIZE AC SEIZE
> 8 AR 10 4 No No SEIZE AC SEIZE
> 9 AR 10 4 No No SEIZE AC SEIZE
> 10 AR 10 4 No No SEIZE AC SEIZE
> 11 AR 10 4 No No SEIZE AC SEIZE
> 12 AR 10 4 No No SEIZE AC SEIZE
> 13 AR 10 4 No No SEIZE AC SEIZE
> 14 AR 10 4 No No SEIZE AC SEIZE
> 15 AR 10 4 No No SEIZE AC SEIZE
> 17 AR 10 4 No No SEIZE AC SEIZE
> 18 AR 10 4 No No SEIZE AC SEIZE
> 19 AR 10 4 No No SEIZE AC SEIZE
> 20 AR 10 4 No No SEIZE AC SEIZE
> 21 AR 10 4 No No SEIZE AC SEIZE
> 22 AR 10 4 No No SEIZE AC SEIZE
> 23 AR 10 4 No No SEIZE AC SEIZE
> 24 AR 10 4 No No SEIZE AC SEIZE
> 25 AR 10 4 No No SEIZE AC SEIZE
> 26 AR 10 4 No No SEIZE AC SEIZE
> 27 AR 10 4 No No SEIZE AC SEIZE
> 28 AR 10 4 No No SEIZE AC SEIZE
> 29 AR 10 4 No No SEIZE AC SEIZE
> 30 AR 10 4 No No SEIZE AC SEIZE
> 31 AR 10 4 No No SEIZE AC SEIZE
>
> after a while, send the following errors
>
> New MFC/R2 call detected on chan 12.
> [Feb 23 12:43:00] ERROR[16995]: chan_dahdi.c:1683 dahdi_r2_write_log: Chan
> 13 - Protocol error. Reason = Invalid CAS, R2 State = Idle, MF state = MF
> Engine Off, MF Group = No Group, CAS = 0x04
> DNIS = , ANI = , MF = 0x20
> [Feb 23 12:43:00] ERROR[16995]: chan_dahdi.c:1455
> dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 13: Invalid CAS
> New MFC/R2 call detected on chan 28.
> [Feb 23 12:43:00] ERROR[16996]: chan_dahdi.c:1683 dahdi_r2_write_log: Chan
> 29 - Protocol error. Reason = Invalid CAS, R2 State = Idle, MF state = MF
> Engine Off, MF Group = No Group, CAS = 0x04
> DNIS = , ANI = , MF = 0x20
> [Feb 23 12:43:00] ERROR[16996]: chan_dahdi.c:1455
> dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 29: Invalid CAS
>
> Feb 23 16:41:48] ERROR[11065]: chan_dahdi.c:1683 dahdi_r2_write_log: Chan 25
> - Protocol error. Reason = Invalid CAS, R2 State = Seize ACK Transmitted, MF
> state = Seize ACK Transmitted, MF Group = Backward MF init, CAS = 0x0C
> DNIS = , ANI = , MF = 0x20
> [Feb 23 16:41:48] ERROR[11065]: chan_dahdi.c:1455
> dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 25: Invalid CAS
> [Feb 23 16:41:48] ERROR[11064]: chan_dahdi.c:1683 dahdi_r2_write_log: Chan 9
> - Protocol error. Reason = Invalid CAS, R2 State = Seize ACK Transmitted, MF
> state = Seize ACK Transmitted, MF Group = Backward MF init, CAS = 0x0C
> DNIS = , ANI = , MF = 0x20
> [Feb 23 16:41:48] ERROR[11064]: chan_dahdi.c:1455
> dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 9: Invalid CAS
>
>
> == Manager 'sendcron' logged off from 127.0.0.1
> [Feb 23 15:40:32] NOTICE[1420]: chan_dahdi.c:1713 dahdi_r2_on_line_idle: Far
> end unblocked on chan 29
> [Feb 23 15:40:32] NOTICE[1420]: chan_dahdi.c:1713 dahdi_r2_on_line_idle: Far
> end unblocked on chan 30
> [Feb 23 15:40:32] NOTICE[1420]: chan_dahdi.c:1713 dahdi_r2_on_line_idle: Far
> end unblocked on chan 31
> [Feb 23 15:40:32] NOTICE[1419]: chan_dahdi.c:1713 dahdi_r2_on_line_idle: Far
> end unblocked on chan 13
> [Feb 23 15:40:32] NOTICE[1419]: chan_dahdi.c:1713 dahdi_r2_on_line_idle: Far
> end unblocked on chan 14
> [Feb 23 15:40:32] NOTICE[1419]: chan_dahdi.c:1713 dahdi_r2_on_line_idle: Far
> end unblocked on chan 15
>
>
> when trying to make, does not find channels
>
>
> -- Executing [141 at phones:1] Answer("SIP/cc6105-00000000", "nocdr") in new
> stack
> -- Executing [141 at phones:2] Dial("SIP/cc6105-00000000", "Dahdi/g0/141|50")
> in new stack
> [Feb 23 16:01:25] WARNING[8180]: app_dial.c:1310 dial_exec_full: Unable to
> create channel of type 'Dahdi' (cause 34 - Circuit/channel congestion)
> == Everyone is busy/congested at this time (1:0/1/0)
> -- Executing [141 at phones:3] GotoIf("SIP/cc6105-00000000",
> "0?unavailable:hangup") in new stack
> -- Goto (phones,141,5)
> -- Executing [141 at phones:5] Hangup("SIP/cc6105-00000000", "") in new stack
> == Spawn extension (phones, 141, 5) exited non-zero on 'SIP/cc6105-00000000'
>
>
> [Feb 23 16:12:07] WARNING[9372]: chan_dahdi.c:1680 dahdi_r2_write_log: Chan
> 12 - Seize Timeout Expired!
> [Feb 23 16:12:07] ERROR[9372]: chan_dahdi.c:1683 dahdi_r2_write_log: Chan 12
> - Protocol error. Reason = Seize Timeout, R2 State = Seize Transmitted, MF
> state = MF Engine Off, MF Group = Forward MF init, CAS = 0x08
> DNIS = 141, ANI = 6105, MF = 0x20
> [Feb 23 16:12:07] ERROR[9372]: chan_dahdi.c:1455 dahdi_r2_on_protocol_error:
> MFC/R2 protocol error on chan 12: Seize Timeout
> [Feb 23 16:12:07] WARNING[9372]: app_dial.c:801 wait_for_answer: Unable to
> forward voice or dtmf
> -- Hungup 'DAHDI/12-1'
> == Everyone is busy/congested at this time (1:0/0/1)
> -- Executing [141 at phones:3] GotoIf("SIP/cc6105-00000003",
> "0?unavailable:hangup") in new stack
> -- Goto (phones,141,5)
> -- Executing [141 at phones:5] Hangup("SIP/cc6105-00000003", "") in new stack
> == Spawn extension (phones, 141, 5) exited non-zero on 'SIP/cc6105-00000003'
>
> I appreciate any ideas
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> ? http://lists.digium.com/mailman/listinfo/asterisk-r2
-
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120229/59553fe3/attachment-0001.htm>
More information about the asterisk-r2
mailing list