[asterisk-r2] asterisk integrated with Panasonic emss336

[Ricardo Pinilla]

>

>Dear
>Panasonic KX-T336 (emss336) E1 card could be  enable or disable CRC4, by the way card support only 75 ohms,   it should be use adaptor.
>In case have  installed check wiring, you can make a loopback to check if physical connection is OK.
>In case already checked please let it know.
>Mc GRATH Ricardo
>
>



Hi Ricardo (tocayo :)  thanks for your input.

The odd thing is without CRC4 the alarm is not cleared on the link, however I'd ask the panasonic admin to disable the CRC4 for testing purposes.


Would be possible that just that parameter is the one that doesn't let me use the E1 R2 link between the emss336 and the asterisk?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120229/84a9e975/attachment.htm>