[asterisk-r2] Asterisk R2 configuration

[Camilo Quelquejeu]

and the only way to check that is with the cable right?

Camilo

Moises Silva wrote:
> unicall has nothing to do with the red alarms.
> 
> check your installation? yes, when you get rid of the red alarms. The
> first thing is to get rid of the red alarms, and red alarms mean you
> connected something physically wrong or you configured the zaptel.conf
> wrong for the type of link provided.
> 
> On Tue, Nov 18, 2008 at 9:24 AM, Camilo Quelquejeu <camilo at cabimax.com> wrote:
>> Is there any chance i have the compilation and instalation of the
>> unicall wrong, hence the red alarms? is there any way i can check my
>> instalation?
>>
>> Camilo
>>
>> Moises Silva wrote:
>>> I don't see anything wrong with your config, but looks suspicious to
>>> me that you are using span=2,0,0
>>>
>>> Are you use you want span 2 to be the master?
>>>
>>> In any case, you can create a E1 cross-over cable to verify your own
>>> configuration without the telco. check this out:
>>> http://www.moythreads.com/unicall/e1_crossover.html
>>>
>>> That way you will discard your configuration and can call the telco to
>>> ask why your link is down.
>>>
>>> On Thu, Oct 30, 2008 at 1:47 PM, Camilo Quelquejeu <camilo at cabimax.com> wrote:
>>>> the zaptel.conf goes like this
>>>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4 RED
>>>> span=1,1,0,cas,hdb3
>>>> cas=1-15:1101
>>>> cas=17-31:1101
>>>> #
>>>> span=2,0,0,cas,hdb3
>>>> cas=32-46:1101
>>>> cas=48-62:1101
>>>>
>>>>
>>>> # Global data
>>>>
>>>> loadzone        = br
>>>> defaultzone     = br
>>>>
>>>>
>>>>
>>>> and the ztcfg -v  goes like this
>>>>
>>>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>> SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>>
>>>> 60 channels to configure.
>>>>
>>>>
>>>>
>>>> thanks in advanced for the help
>>>>
>>>> Camilo
>>>>
>>>> Moises Silva wrote:
>>>>> It could be caused by the moon :) who knows, without showing your
>>>>> zaptel.conf and pastebin of the output of ztcfg -vv we cannot try to
>>>>> answer.
>>>>>
>>>>> On Thu, Oct 30, 2008 at 11:20 AM, Camilo Quelquejeu <camilo at cabimax.com>
>>>>> wrote:
>>>>>> I installed, compiled and configured the astunicall, and when i use the
>>>>>> ztcfg -v command, it tells me there are 60 channels to be configured and
>>>>>> the zttool shows the card with a red alarm, what could be the cause of
>>>>>> this? does anyone know how to configure the extensions.conf so i can use
>>>>>> the unicall channels to receive calls in El salvador?
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Camilo Quelquejeu
>>>>>> Chief IT  |  Cabimax, S.A.
>>>>>> camilo at cabimax.com  Tel: 302-7424
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>
>>>>>> asterisk-r2 mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>  http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>
>>>>>
>>>> --
>>>> Camilo Quelquejeu
>>>> Chief IT  |  Cabimax, S.A.
>>>> camilo at cabimax.com  Tel: 302-7424
>>>>
>>>>
>>>>
>>>
>>>
>> --
>> Camilo Quelquejeu
>> Chief IT  |  Cabimax, S.A.
>> camilo at cabimax.com  Tel: 302-7424
>>
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
> 
> 
> 

-- 
Camilo Quelquejeu
Chief IT  |  Cabimax, S.A.
camilo at cabimax.com  Tel: 302-7424