[asterisk-r2] Asterisk R2 configuration

[Moises Silva]

unicall has nothing to do with the red alarms.

check your installation? yes, when you get rid of the red alarms. The
first thing is to get rid of the red alarms, and red alarms mean you
connected something physically wrong or you configured the zaptel.conf
wrong for the type of link provided.

On Tue, Nov 18, 2008 at 9:24 AM, Camilo Quelquejeu <camilo at cabimax.com> wrote:
> Is there any chance i have the compilation and instalation of the
> unicall wrong, hence the red alarms? is there any way i can check my
> instalation?
>
> Camilo
>
> Moises Silva wrote:
>> I don't see anything wrong with your config, but looks suspicious to
>> me that you are using span=2,0,0
>>
>> Are you use you want span 2 to be the master?
>>
>> In any case, you can create a E1 cross-over cable to verify your own
>> configuration without the telco. check this out:
>> http://www.moythreads.com/unicall/e1_crossover.html
>>
>> That way you will discard your configuration and can call the telco to
>> ask why your link is down.
>>
>> On Thu, Oct 30, 2008 at 1:47 PM, Camilo Quelquejeu <camilo at cabimax.com> wrote:
>>> the zaptel.conf goes like this
>>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4 RED
>>> span=1,1,0,cas,hdb3
>>> cas=1-15:1101
>>> cas=17-31:1101
>>> #
>>> span=2,0,0,cas,hdb3
>>> cas=32-46:1101
>>> cas=48-62:1101
>>>
>>>
>>> # Global data
>>>
>>> loadzone        = br
>>> defaultzone     = br
>>>
>>>
>>>
>>> and the ztcfg -v  goes like this
>>>
>>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>> SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>
>>> 60 channels to configure.
>>>
>>>
>>>
>>> thanks in advanced for the help
>>>
>>> Camilo
>>>
>>> Moises Silva wrote:
>>>> It could be caused by the moon :) who knows, without showing your
>>>> zaptel.conf and pastebin of the output of ztcfg -vv we cannot try to
>>>> answer.
>>>>
>>>> On Thu, Oct 30, 2008 at 11:20 AM, Camilo Quelquejeu <camilo at cabimax.com>
>>>> wrote:
>>>>> I installed, compiled and configured the astunicall, and when i use the
>>>>> ztcfg -v command, it tells me there are 60 channels to be configured and
>>>>> the zttool shows the card with a red alarm, what could be the cause of
>>>>> this? does anyone know how to configure the extensions.conf so i can use
>>>>> the unicall channels to receive calls in El salvador?
>>>>>
>>>>>
>>>>> --
>>>>> Camilo Quelquejeu
>>>>> Chief IT  |  Cabimax, S.A.
>>>>> camilo at cabimax.com  Tel: 302-7424
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>
>>>>> asterisk-r2 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>  http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>
>>>>
>>>>
>>> --
>>> Camilo Quelquejeu
>>> Chief IT  |  Cabimax, S.A.
>>> camilo at cabimax.com  Tel: 302-7424
>>>
>>>
>>>
>>
>>
>>
>
> --
> Camilo Quelquejeu
> Chief IT  |  Cabimax, S.A.
> camilo at cabimax.com  Tel: 302-7424
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>



-- 
"I do not agree with what you have to say, but I'll defend to the
death your right to say it." Voltaire