[asterisk-r2] Asterisk R2 configuration

[Melcon Moraes]

Buying Moy's advice on crossover E1 cable should help you. That would
be a nice starting point.

-MM

On Tue, Nov 18, 2008 at 2:17 PM, Camilo Quelquejeu <camilo at cabimax.com> wrote:
> and the only way to check that is with the cable right?
>
> Camilo
>
> Moises Silva wrote:
>> unicall has nothing to do with the red alarms.
>>
>> check your installation? yes, when you get rid of the red alarms. The
>> first thing is to get rid of the red alarms, and red alarms mean you
>> connected something physically wrong or you configured the zaptel.conf
>> wrong for the type of link provided.
>>
>> On Tue, Nov 18, 2008 at 9:24 AM, Camilo Quelquejeu <camilo at cabimax.com> wrote:
>>> Is there any chance i have the compilation and instalation of the
>>> unicall wrong, hence the red alarms? is there any way i can check my
>>> instalation?
>>>
>>> Camilo
>>>
>>> Moises Silva wrote:
>>>> I don't see anything wrong with your config, but looks suspicious to
>>>> me that you are using span=2,0,0
>>>>
>>>> Are you use you want span 2 to be the master?
>>>>
>>>> In any case, you can create a E1 cross-over cable to verify your own
>>>> configuration without the telco. check this out:
>>>> http://www.moythreads.com/unicall/e1_crossover.html
>>>>
>>>> That way you will discard your configuration and can call the telco to
>>>> ask why your link is down.
>>>>
>>>> On Thu, Oct 30, 2008 at 1:47 PM, Camilo Quelquejeu <camilo at cabimax.com> wrote:
>>>>> the zaptel.conf goes like this
>>>>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4 RED
>>>>> span=1,1,0,cas,hdb3
>>>>> cas=1-15:1101
>>>>> cas=17-31:1101
>>>>> #
>>>>> span=2,0,0,cas,hdb3
>>>>> cas=32-46:1101
>>>>> cas=48-62:1101
>>>>>
>>>>>
>>>>> # Global data
>>>>>
>>>>> loadzone        = br
>>>>> defaultzone     = br
>>>>>
>>>>>
>>>>>
>>>>> and the ztcfg -v  goes like this
>>>>>
>>>>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>>> SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>>>
>>>>> 60 channels to configure.
>>>>>
>>>>>
>>>>>
>>>>> thanks in advanced for the help
>>>>>
>>>>> Camilo
>>>>>
>>>>> Moises Silva wrote:
>>>>>> It could be caused by the moon :) who knows, without showing your
>>>>>> zaptel.conf and pastebin of the output of ztcfg -vv we cannot try to
>>>>>> answer.
>>>>>>
>>>>>> On Thu, Oct 30, 2008 at 11:20 AM, Camilo Quelquejeu <camilo at cabimax.com>
>>>>>> wrote:
>>>>>>> I installed, compiled and configured the astunicall, and when i use the
>>>>>>> ztcfg -v command, it tells me there are 60 channels to be configured and
>>>>>>> the zttool shows the card with a red alarm, what could be the cause of
>>>>>>> this? does anyone know how to configure the extensions.conf so i can use
>>>>>>> the unicall channels to receive calls in El salvador?
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Camilo Quelquejeu
>>>>>>> Chief IT  |  Cabimax, S.A.
>>>>>>> camilo at cabimax.com  Tel: 302-7424
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>>
>>>>>>> asterisk-r2 mailing list
>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>>  http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>>
>>>>>>
>>>>> --
>>>>> Camilo Quelquejeu
>>>>> Chief IT  |  Cabimax, S.A.
>>>>> camilo at cabimax.com  Tel: 302-7424
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>> --
>>> Camilo Quelquejeu
>>> Chief IT  |  Cabimax, S.A.
>>> camilo at cabimax.com  Tel: 302-7424
>>>
>>>
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>>
>
> --
> Camilo Quelquejeu
> Chief IT  |  Cabimax, S.A.
> camilo at cabimax.com  Tel: 302-7424
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>