[Asterisk-video] Outbound Video call.
jack nicolson
jack.nicolson123 at gmail.com
Fri Mar 13 04:47:09 CDT 2009
Hi klaus,
1. AMR codec is not installed
for the above when I tried to install amr patch from
http://sip.fontventa.com, however because of codec_amr.so module my asterisk
does not start in background. only in console it started that too if I
uncomment the below lines in "codec.conf" it gives segmentation fault.
;[amr]
;octet-aligned=1
In asterisk Cli when I use commend "core show codec". I find amr codec
there.
INT BINARY HEX TYPE NAME DESC
--------------------------------------------------------------------------------
8192 (1 << 13) (0x2000) audio amr (AMR NB)
2. user information layer 1 is not "h.223 and h.245" (=h324m)
I don't have knowledge about user informatio layer 1 as in my case it is
unknown could you u let me know how to set up.
3 "no route to destination".
I need to figure out the above message.
Klaus could you please wht I need to do to fix the first two issue.
Thanks,
Jack
On Fri, Mar 13, 2009 at 2:17 PM, Klaus Darilion <
klaus.mailinglists at pernau.at> wrote:
> looks like
> 1. AMR codec is not installed
> 2. user information layer 1 is not "h.223 and h.245" (=h324m)
> 3. the switch answer with "no route to destination"
>
> klaus
>
> jack nicolson schrieb:
> > Hi Klaus,
> >
> > Below is the response which I am getting while try to make video out
> > bound call,
> >
> >
> > -- Attempting call on Local/9467000603 at 3G for 1 at video:1 (Retry 1)
> > -- Executing [9467000603 at 3G:1] System("Local/9467000603 at 3G-8c88,2",
> > "sh /etc/asterisk/video_callback.sh 9467000603 CALLING") in new stack
> > -- Executing [9467000603 at 3G:2]
> > h324m_call("Local/9467000603 at 3G-8c88,2", "9467000603 at 3GV") in new stack
> > [Mar 13 11:56:14] WARNING[16543]: channel.c:2781 set_format: Unable to
> > find a codec translation path from slin to amr
> > [Mar 13 11:56:14] WARNING[16543]: app_h324m.c:1143 app_h324m_call:
> > app_h324m_call: Unable to set read format to AMR-NB!
> > [Mar 13 11:56:14] WARNING[16543]: channel.c:2781 set_format: Unable to
> > find a codec translation path from slin to amr
> > [Mar 13 11:56:14] WARNING[16543]: app_h324m.c:1145 app_h324m_call:
> > app_h324m_call: Unable to set read format to AMR-NB!
> > -- Executing [9467000603 at 3GV:1] Set("Local/9467000603 at 3GV-daad,2",
> > "CHANNEL(transfercapability)=VIDEO") in new stack
> > -- Executing [9467000603 at 3GV:2] Dial("Local/9467000603 at 3GV-daad,2",
> > "Zap/g0/9467000603") in new stack
> > -- Making new call for cr 32785
> > -- Requested transfer capability: 0x18 - VIDEO
> > > Protocol Discriminator: Q.931 (8) len=44
> > > Call Ref: len= 2 (reference 17/0x11) (Originator)
> > > Message type: SETUP (5)
> > > [04 03 88 90 bf]
> > > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> > capability: Unrestricted digital information (8)
> > > Ext: 1 Trans mode/rate: 64kbps,
> > circuit-mode (16)
> > > User information layer 1: Unknown (63)
> > > [18 03 a9 83 81]
> > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> > Exclusive Dchan: 0
> > > ChanSel: As indicated in following octets
> > > Ext: 1 Coding: 0 Number Specified Channel
> > Type: 3
> > > Ext: 1 Channel: 1 ]
> > > [6c 0d 21 80 30 34 30 34 34 33 31 33 30 30 30]
> > > Calling Number (len=15) [ Ext: 0 TON: National Number (2) NPI:
> > ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> > > Presentation: Presentation permitted, user
> > number not screened (0) '04044313000' ]
> > > [70 0b c1 39 34 36 37 30 30 30 36 30 33]
> > > Called Number (len=13) [ Ext: 1 TON: Subscriber Number (4) NPI:
> > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '9467000603' ]
> > > [a1]
> > > Sending Complete (len= 1)
> > q931.c:3092 q931_setup: call 32785 on channel 1 enters state 1 (Call
> > Initiated)
> > -- Called g0/9467000603
> > < Protocol Discriminator: Q.931 (8) len=10
> > < Call Ref: len= 2 (reference 17/0x11) (Terminator)
> > < Message type: CALL PROCEEDING (2)
> > < [18 03 a9 83 81]
> > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> > Exclusive Dchan: 0
> > < ChanSel: As indicated in following octets
> > < Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> > < Ext: 1 Channel: 1 ]
> > -- Processing IE 24 (cs0, Channel Identification)
> > q931.c:3641 q931_receive: call 32785 on channel 1 enters state 3
> > (Outgoing call Proceeding)
> > -- Zap/1-1 is proceeding passing it to Local/9467000603 at 3GV-daad,2
> > < Protocol Discriminator: Q.931 (8) len=9
> > < Call Ref: len= 2 (reference 17/0x11) (Terminator)
> > < Message type: DISCONNECT (69)
> > < [08 02 82 83]
> > < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
> > Location: Public network serving the local user (2)
> > < Ext: 1 Cause: No route to destination (3), class =
> > Normal Event (0) ]
> > -- Processing IE 8 (cs0, Cause)
> > q931.c:3784 q931_receive: call 32785 on channel 1 enters state 12
> > (Disconnect Indication)
> > -- Channel 0/1, span 1 got hangup request, cause 3
> > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
> > peerstate Disconnect Request
> > q931.c:2925 q931_release: call 32785 on channel 1 enters state 19
> > (Release Request)
> > > Protocol Discriminator: Q.931 (8) len=9
> > > Call Ref: len= 2 (reference 17/0x11) (Originator)
> > > Message type: RELEASE (77)
> > > [08 02 81 83]
> > > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
> > Location: Private network serving the local user (1)
> > > Ext: 1 Cause: No route to destination (3), class =
> > Normal Event (0) ]
> > -- Hungup 'Zap/1-1'
> > == Everyone is busy/congested at this time (1:0/0/1)
> > == Auto fallthrough, channel 'Local/9467000603 at 3GV-daad,2' status is
> > 'CHANUNAVAIL'
> > == Auto fallthrough, channel 'Local/9467000603 at 3G-8c88,2' status is
> > 'UNKNOWN'
> > [Mar 13 11:56:14] NOTICE[16542]: pbx_spool.c:341 attempt_thread: Call
> > failed to go through, reason (1) Hangup
> > < Protocol Discriminator: Q.931 (8) len=5
> > < Call Ref: len= 2 (reference 17/0x11) (Terminator)
> > < Message type: RELEASE COMPLETE (90)
> > q931.c:3724 q931_receive: call 32785 on channel 1 enters state 0 (Null)
> > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
> >
> >
> >
> >
> > Could you help me to fix this issue.
> >
> >
> > Thanks,
> >
> > Jack
> >
> >
> > On Fri, Mar 13, 2009 at 9:44 AM, jack nicolson
> > <jack.nicolson123 at gmail.com <mailto:jack.nicolson123 at gmail.com>> wrote:
> >
> > Please ignore the previous message you are right Klaus. There is no
> > zap channel i need to start them.
> >
> >
> > Thanks
> >
> > Jack
> >
> >
> > On Fri, Mar 13, 2009 at 9:20 AM, jack nicolson
> > <jack.nicolson123 at gmail.com <mailto:jack.nicolson123 at gmail.com>>
> wrote:
> >
> > Hi Klaus,
> >
> > My normal audio outbound call works fine.only problem with video
> > outbound call.
> >
> > My asterisk box is connected to E1 line through Digium card.
> >
> >
> > Thanks,
> >
> > Jack
> >
> >
> > On Thu, Mar 12, 2009 at 8:30 PM, Klaus Darilion
> > <klaus.mailinglists at pernau.at
> > <mailto:klaus.mailinglists at pernau.at>> wrote:
> >
> >
> >
> > jack nicolson schrieb:
> > > -- Executing [9467000603 at 3GV:2]
> > Dial("Local/9467000603 at 3GV-0624,2",
> > > "Zap/g0/9467000603") in new stack
> > > [Mar 12 19:15:36] WARNING[9206]: channel.c:3027
> > ast_request: No channel
> > > type registered for 'Zap'
> > > [Mar 12 19:15:36] WARNING[9206]: app_dial.c:1183
> > dial_exec_full: Unable
> > > to create channel of type 'Zap' (cause 66 - Channel not
> > implemented)
> > > == Everyone is busy/congested at this time (1:0/0/1)
> >
> >
> > There is no Zap channel. How are you connected to the PSTN?
> > Zap? Dahdi?
> > Are normal audio calls work?
> >
> > klaus
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by
> > http://www.api-digital.com--
> >
> > asterisk-video mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-video
> >
> >
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-video mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-video
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-video/attachments/20090313/4cf2f607/attachment.htm
More information about the asterisk-video
mailing list