[Asterisk-video] Outbound Video call.
jack nicolson
jack.nicolson123 at gmail.com
Sun Mar 15 23:28:08 CDT 2009
Hi,
I am able to recieve incoming call properly and video is also playing
nicely. but outbound call is not working.
thanks,
jack
On Fri, Mar 13, 2009 at 3:17 PM, jack nicolson
<jack.nicolson123 at gmail.com>wrote:
>
> Hi klaus,
>
> 1. AMR codec is not installed
>
> for the above when I tried to install amr patch from
> http://sip.fontventa.com, however because of codec_amr.so module my
> asterisk does not start in background. only in console it started that too
> if I uncomment the below lines in "codec.conf" it gives segmentation fault.
> ;[amr]
> ;octet-aligned=1
>
> In asterisk Cli when I use commend "core show codec". I find amr codec
> there.
>
>
>
>
>
>
> INT BINARY HEX TYPE NAME DESC
>
> --------------------------------------------------------------------------------
>
>
> 8192 (1 << 13) (0x2000) audio amr (AMR NB)
>
>
>
> 2. user information layer 1 is not "h.223 and h.245" (=h324m)
>
> I don't have knowledge about user informatio layer 1 as in my case it is
> unknown could you u let me know how to set up.
>
>
> 3 "no route to destination".
>
> I need to figure out the above message.
>
>
> Klaus could you please wht I need to do to fix the first two issue.
>
>
> Thanks,
>
>
> Jack
>
>
>
>
>
>
>
>
> On Fri, Mar 13, 2009 at 2:17 PM, Klaus Darilion <
> klaus.mailinglists at pernau.at> wrote:
>
>> looks like
>> 1. AMR codec is not installed
>> 2. user information layer 1 is not "h.223 and h.245" (=h324m)
>> 3. the switch answer with "no route to destination"
>>
>> klaus
>>
>> jack nicolson schrieb:
>> > Hi Klaus,
>> >
>> > Below is the response which I am getting while try to make video out
>> > bound call,
>> >
>> >
>> > -- Attempting call on Local/9467000603 at 3G for 1 at video:1 (Retry 1)
>> > -- Executing [9467000603 at 3G:1] System("Local/9467000603 at 3G-8c88,2",
>> > "sh /etc/asterisk/video_callback.sh 9467000603 CALLING") in new stack
>> > -- Executing [9467000603 at 3G:2]
>> > h324m_call("Local/9467000603 at 3G-8c88,2", "9467000603 at 3GV") in new stack
>> > [Mar 13 11:56:14] WARNING[16543]: channel.c:2781 set_format: Unable to
>> > find a codec translation path from slin to amr
>> > [Mar 13 11:56:14] WARNING[16543]: app_h324m.c:1143 app_h324m_call:
>> > app_h324m_call: Unable to set read format to AMR-NB!
>> > [Mar 13 11:56:14] WARNING[16543]: channel.c:2781 set_format: Unable to
>> > find a codec translation path from slin to amr
>> > [Mar 13 11:56:14] WARNING[16543]: app_h324m.c:1145 app_h324m_call:
>> > app_h324m_call: Unable to set read format to AMR-NB!
>> > -- Executing [9467000603 at 3GV:1] Set("Local/9467000603 at 3GV-daad,2",
>> > "CHANNEL(transfercapability)=VIDEO") in new stack
>> > -- Executing [9467000603 at 3GV:2] Dial("Local/9467000603 at 3GV-daad,2",
>> > "Zap/g0/9467000603") in new stack
>> > -- Making new call for cr 32785
>> > -- Requested transfer capability: 0x18 - VIDEO
>> > > Protocol Discriminator: Q.931 (8) len=44
>> > > Call Ref: len= 2 (reference 17/0x11) (Originator)
>> > > Message type: SETUP (5)
>> > > [04 03 88 90 bf]
>> > > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
>> > capability: Unrestricted digital information (8)
>> > > Ext: 1 Trans mode/rate: 64kbps,
>> > circuit-mode (16)
>> > > User information layer 1: Unknown (63)
>> > > [18 03 a9 83 81]
>> > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
>> > Exclusive Dchan: 0
>> > > ChanSel: As indicated in following octets
>> > > Ext: 1 Coding: 0 Number Specified Channel
>> > Type: 3
>> > > Ext: 1 Channel: 1 ]
>> > > [6c 0d 21 80 30 34 30 34 34 33 31 33 30 30 30]
>> > > Calling Number (len=15) [ Ext: 0 TON: National Number (2) NPI:
>> > ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>> > > Presentation: Presentation permitted, user
>> > number not screened (0) '04044313000' ]
>> > > [70 0b c1 39 34 36 37 30 30 30 36 30 33]
>> > > Called Number (len=13) [ Ext: 1 TON: Subscriber Number (4) NPI:
>> > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '9467000603' ]
>> > > [a1]
>> > > Sending Complete (len= 1)
>> > q931.c:3092 q931_setup: call 32785 on channel 1 enters state 1 (Call
>> > Initiated)
>> > -- Called g0/9467000603
>> > < Protocol Discriminator: Q.931 (8) len=10
>> > < Call Ref: len= 2 (reference 17/0x11) (Terminator)
>> > < Message type: CALL PROCEEDING (2)
>> > < [18 03 a9 83 81]
>> > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
>> > Exclusive Dchan: 0
>> > < ChanSel: As indicated in following octets
>> > < Ext: 1 Coding: 0 Number Specified Channel
>> Type: 3
>> > < Ext: 1 Channel: 1 ]
>> > -- Processing IE 24 (cs0, Channel Identification)
>> > q931.c:3641 q931_receive: call 32785 on channel 1 enters state 3
>> > (Outgoing call Proceeding)
>> > -- Zap/1-1 is proceeding passing it to Local/9467000603 at 3GV-daad,2
>> > < Protocol Discriminator: Q.931 (8) len=9
>> > < Call Ref: len= 2 (reference 17/0x11) (Terminator)
>> > < Message type: DISCONNECT (69)
>> > < [08 02 82 83]
>> > < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
>> > Location: Public network serving the local user (2)
>> > < Ext: 1 Cause: No route to destination (3), class =
>> > Normal Event (0) ]
>> > -- Processing IE 8 (cs0, Cause)
>> > q931.c:3784 q931_receive: call 32785 on channel 1 enters state 12
>> > (Disconnect Indication)
>> > -- Channel 0/1, span 1 got hangup request, cause 3
>> > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
>> > peerstate Disconnect Request
>> > q931.c:2925 q931_release: call 32785 on channel 1 enters state 19
>> > (Release Request)
>> > > Protocol Discriminator: Q.931 (8) len=9
>> > > Call Ref: len= 2 (reference 17/0x11) (Originator)
>> > > Message type: RELEASE (77)
>> > > [08 02 81 83]
>> > > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
>> > Location: Private network serving the local user (1)
>> > > Ext: 1 Cause: No route to destination (3), class =
>> > Normal Event (0) ]
>> > -- Hungup 'Zap/1-1'
>> > == Everyone is busy/congested at this time (1:0/0/1)
>> > == Auto fallthrough, channel 'Local/9467000603 at 3GV-daad,2' status is
>> > 'CHANUNAVAIL'
>> > == Auto fallthrough, channel 'Local/9467000603 at 3G-8c88,2' status is
>> > 'UNKNOWN'
>> > [Mar 13 11:56:14] NOTICE[16542]: pbx_spool.c:341 attempt_thread: Call
>> > failed to go through, reason (1) Hangup
>> > < Protocol Discriminator: Q.931 (8) len=5
>> > < Call Ref: len= 2 (reference 17/0x11) (Terminator)
>> > < Message type: RELEASE COMPLETE (90)
>> > q931.c:3724 q931_receive: call 32785 on channel 1 enters state 0 (Null)
>> > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
>> > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
>> >
>> >
>> >
>> >
>> > Could you help me to fix this issue.
>> >
>> >
>> > Thanks,
>> >
>> > Jack
>> >
>> >
>> > On Fri, Mar 13, 2009 at 9:44 AM, jack nicolson
>> > <jack.nicolson123 at gmail.com <mailto:jack.nicolson123 at gmail.com>> wrote:
>> >
>> > Please ignore the previous message you are right Klaus. There is no
>> > zap channel i need to start them.
>> >
>> >
>> > Thanks
>> >
>> > Jack
>> >
>> >
>> > On Fri, Mar 13, 2009 at 9:20 AM, jack nicolson
>> > <jack.nicolson123 at gmail.com <mailto:jack.nicolson123 at gmail.com>>
>> wrote:
>> >
>> > Hi Klaus,
>> >
>> > My normal audio outbound call works fine.only problem with video
>> > outbound call.
>> >
>> > My asterisk box is connected to E1 line through Digium card.
>> >
>> >
>> > Thanks,
>> >
>> > Jack
>> >
>> >
>> > On Thu, Mar 12, 2009 at 8:30 PM, Klaus Darilion
>> > <klaus.mailinglists at pernau.at
>> > <mailto:klaus.mailinglists at pernau.at>> wrote:
>> >
>> >
>> >
>> > jack nicolson schrieb:
>> > > -- Executing [9467000603 at 3GV:2]
>> > Dial("Local/9467000603 at 3GV-0624,2",
>> > > "Zap/g0/9467000603") in new stack
>> > > [Mar 12 19:15:36] WARNING[9206]: channel.c:3027
>> > ast_request: No channel
>> > > type registered for 'Zap'
>> > > [Mar 12 19:15:36] WARNING[9206]: app_dial.c:1183
>> > dial_exec_full: Unable
>> > > to create channel of type 'Zap' (cause 66 - Channel not
>> > implemented)
>> > > == Everyone is busy/congested at this time (1:0/0/1)
>> >
>> >
>> > There is no Zap channel. How are you connected to the PSTN?
>> > Zap? Dahdi?
>> > Are normal audio calls work?
>> >
>> > klaus
>> >
>> > _______________________________________________
>> > --Bandwidth and Colocation Provided by
>> > http://www.api-digital.com--
>> >
>> > asterisk-video mailing list
>> > To UNSUBSCRIBE or update options visit:
>> > http://lists.digium.com/mailman/listinfo/asterisk-video
>> >
>> >
>> >
>> >
>> >
>> > ------------------------------------------------------------------------
>> >
>> > _______________________________________________
>> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
>> >
>> > asterisk-video mailing list
>> > To UNSUBSCRIBE or update options visit:
>> > http://lists.digium.com/mailman/listinfo/asterisk-video
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-video mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-video
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-video/attachments/20090316/f23966e2/attachment.htm
More information about the asterisk-video
mailing list