[Asterisk-video] Outbound Video call.
Klaus Darilion
klaus.mailinglists at pernau.at
Fri Mar 13 03:47:25 CDT 2009
looks like
1. AMR codec is not installed
2. user information layer 1 is not "h.223 and h.245" (=h324m)
3. the switch answer with "no route to destination"
klaus
jack nicolson schrieb:
> Hi Klaus,
>
> Below is the response which I am getting while try to make video out
> bound call,
>
>
> -- Attempting call on Local/9467000603 at 3G for 1 at video:1 (Retry 1)
> -- Executing [9467000603 at 3G:1] System("Local/9467000603 at 3G-8c88,2",
> "sh /etc/asterisk/video_callback.sh 9467000603 CALLING") in new stack
> -- Executing [9467000603 at 3G:2]
> h324m_call("Local/9467000603 at 3G-8c88,2", "9467000603 at 3GV") in new stack
> [Mar 13 11:56:14] WARNING[16543]: channel.c:2781 set_format: Unable to
> find a codec translation path from slin to amr
> [Mar 13 11:56:14] WARNING[16543]: app_h324m.c:1143 app_h324m_call:
> app_h324m_call: Unable to set read format to AMR-NB!
> [Mar 13 11:56:14] WARNING[16543]: channel.c:2781 set_format: Unable to
> find a codec translation path from slin to amr
> [Mar 13 11:56:14] WARNING[16543]: app_h324m.c:1145 app_h324m_call:
> app_h324m_call: Unable to set read format to AMR-NB!
> -- Executing [9467000603 at 3GV:1] Set("Local/9467000603 at 3GV-daad,2",
> "CHANNEL(transfercapability)=VIDEO") in new stack
> -- Executing [9467000603 at 3GV:2] Dial("Local/9467000603 at 3GV-daad,2",
> "Zap/g0/9467000603") in new stack
> -- Making new call for cr 32785
> -- Requested transfer capability: 0x18 - VIDEO
> > Protocol Discriminator: Q.931 (8) len=44
> > Call Ref: len= 2 (reference 17/0x11) (Originator)
> > Message type: SETUP (5)
> > [04 03 88 90 bf]
> > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Unrestricted digital information (8)
> > Ext: 1 Trans mode/rate: 64kbps,
> circuit-mode (16)
> > User information layer 1: Unknown (63)
> > [18 03 a9 83 81]
> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> Exclusive Dchan: 0
> > ChanSel: As indicated in following octets
> > Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> > Ext: 1 Channel: 1 ]
> > [6c 0d 21 80 30 34 30 34 34 33 31 33 30 30 30]
> > Calling Number (len=15) [ Ext: 0 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> > Presentation: Presentation permitted, user
> number not screened (0) '04044313000' ]
> > [70 0b c1 39 34 36 37 30 30 30 36 30 33]
> > Called Number (len=13) [ Ext: 1 TON: Subscriber Number (4) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '9467000603' ]
> > [a1]
> > Sending Complete (len= 1)
> q931.c:3092 q931_setup: call 32785 on channel 1 enters state 1 (Call
> Initiated)
> -- Called g0/9467000603
> < Protocol Discriminator: Q.931 (8) len=10
> < Call Ref: len= 2 (reference 17/0x11) (Terminator)
> < Message type: CALL PROCEEDING (2)
> < [18 03 a9 83 81]
> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> Exclusive Dchan: 0
> < ChanSel: As indicated in following octets
> < Ext: 1 Coding: 0 Number Specified Channel Type: 3
> < Ext: 1 Channel: 1 ]
> -- Processing IE 24 (cs0, Channel Identification)
> q931.c:3641 q931_receive: call 32785 on channel 1 enters state 3
> (Outgoing call Proceeding)
> -- Zap/1-1 is proceeding passing it to Local/9467000603 at 3GV-daad,2
> < Protocol Discriminator: Q.931 (8) len=9
> < Call Ref: len= 2 (reference 17/0x11) (Terminator)
> < Message type: DISCONNECT (69)
> < [08 02 82 83]
> < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
> Location: Public network serving the local user (2)
> < Ext: 1 Cause: No route to destination (3), class =
> Normal Event (0) ]
> -- Processing IE 8 (cs0, Cause)
> q931.c:3784 q931_receive: call 32785 on channel 1 enters state 12
> (Disconnect Indication)
> -- Channel 0/1, span 1 got hangup request, cause 3
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
> peerstate Disconnect Request
> q931.c:2925 q931_release: call 32785 on channel 1 enters state 19
> (Release Request)
> > Protocol Discriminator: Q.931 (8) len=9
> > Call Ref: len= 2 (reference 17/0x11) (Originator)
> > Message type: RELEASE (77)
> > [08 02 81 83]
> > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
> Location: Private network serving the local user (1)
> > Ext: 1 Cause: No route to destination (3), class =
> Normal Event (0) ]
> -- Hungup 'Zap/1-1'
> == Everyone is busy/congested at this time (1:0/0/1)
> == Auto fallthrough, channel 'Local/9467000603 at 3GV-daad,2' status is
> 'CHANUNAVAIL'
> == Auto fallthrough, channel 'Local/9467000603 at 3G-8c88,2' status is
> 'UNKNOWN'
> [Mar 13 11:56:14] NOTICE[16542]: pbx_spool.c:341 attempt_thread: Call
> failed to go through, reason (1) Hangup
> < Protocol Discriminator: Q.931 (8) len=5
> < Call Ref: len= 2 (reference 17/0x11) (Terminator)
> < Message type: RELEASE COMPLETE (90)
> q931.c:3724 q931_receive: call 32785 on channel 1 enters state 0 (Null)
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
>
>
>
>
> Could you help me to fix this issue.
>
>
> Thanks,
>
> Jack
>
>
> On Fri, Mar 13, 2009 at 9:44 AM, jack nicolson
> <jack.nicolson123 at gmail.com <mailto:jack.nicolson123 at gmail.com>> wrote:
>
> Please ignore the previous message you are right Klaus. There is no
> zap channel i need to start them.
>
>
> Thanks
>
> Jack
>
>
> On Fri, Mar 13, 2009 at 9:20 AM, jack nicolson
> <jack.nicolson123 at gmail.com <mailto:jack.nicolson123 at gmail.com>> wrote:
>
> Hi Klaus,
>
> My normal audio outbound call works fine.only problem with video
> outbound call.
>
> My asterisk box is connected to E1 line through Digium card.
>
>
> Thanks,
>
> Jack
>
>
> On Thu, Mar 12, 2009 at 8:30 PM, Klaus Darilion
> <klaus.mailinglists at pernau.at
> <mailto:klaus.mailinglists at pernau.at>> wrote:
>
>
>
> jack nicolson schrieb:
> > -- Executing [9467000603 at 3GV:2]
> Dial("Local/9467000603 at 3GV-0624,2",
> > "Zap/g0/9467000603") in new stack
> > [Mar 12 19:15:36] WARNING[9206]: channel.c:3027
> ast_request: No channel
> > type registered for 'Zap'
> > [Mar 12 19:15:36] WARNING[9206]: app_dial.c:1183
> dial_exec_full: Unable
> > to create channel of type 'Zap' (cause 66 - Channel not
> implemented)
> > == Everyone is busy/congested at this time (1:0/0/1)
>
>
> There is no Zap channel. How are you connected to the PSTN?
> Zap? Dahdi?
> Are normal audio calls work?
>
> klaus
>
> _______________________________________________
> --Bandwidth and Colocation Provided by
> http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
>
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
More information about the asterisk-video
mailing list