[Asterisk-video] Outbound Video call.

jack nicolson jack.nicolson123 at gmail.com
Fri Mar 13 01:46:00 CDT 2009


Hi Klaus,

Below is the response which I am getting while try to make video out bound
call,


 -- Attempting call on Local/9467000603 at 3G for 1 at video:1 (Retry 1)
    -- Executing [9467000603 at 3G:1] System("Local/9467000603 at 3G-8c88,2", "sh
/etc/asterisk/video_callback.sh 9467000603 CALLING") in new stack
    -- Executing [9467000603 at 3G:2] h324m_call("Local/9467000603 at 3G-8c88,2",
"9467000603 at 3GV") in new stack
[Mar 13 11:56:14] WARNING[16543]: channel.c:2781 set_format: Unable to find
a codec translation path from slin to amr
[Mar 13 11:56:14] WARNING[16543]: app_h324m.c:1143 app_h324m_call:
app_h324m_call: Unable to set read format to AMR-NB!
[Mar 13 11:56:14] WARNING[16543]: channel.c:2781 set_format: Unable to find
a codec translation path from slin to amr
[Mar 13 11:56:14] WARNING[16543]: app_h324m.c:1145 app_h324m_call:
app_h324m_call: Unable to set read format to AMR-NB!
    -- Executing [9467000603 at 3GV:1] Set("Local/9467000603 at 3GV-daad,2",
"CHANNEL(transfercapability)=VIDEO") in new stack
    -- Executing [9467000603 at 3GV:2] Dial("Local/9467000603 at 3GV-daad,2",
"Zap/g0/9467000603") in new stack
-- Making new call for cr 32785
    -- Requested transfer capability: 0x18 - VIDEO
> Protocol Discriminator: Q.931 (8)  len=44
> Call Ref: len= 2 (reference 17/0x11) (Originator)
> Message type: SETUP (5)
> [04 03 88 90 bf]
> Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
capability: Unrestricted digital information (8)
>                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode
(16)
>                                User information layer 1: Unknown (63)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit  PRI  Spare: 0  Exclusive
Dchan: 0
>                        ChanSel: As indicated in following octets
>                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
>                       Ext: 1  Channel: 1 ]
> [6c 0d 21 80 30 34 30 34 34 33 31 33 30 30 30]
> Calling Number (len=15) [ Ext: 0  TON: National Number (2)  NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>                           Presentation: Presentation permitted, user
number not screened (0)  '04044313000' ]
> [70 0b c1 39 34 36 37 30 30 30 36 30 33]
> Called Number (len=13) [ Ext: 1  TON: Subscriber Number (4)  NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)  '9467000603' ]
> [a1]
> Sending Complete (len= 1)
q931.c:3092 q931_setup: call 32785 on channel 1 enters state 1 (Call
Initiated)
    -- Called g0/9467000603
< Protocol Discriminator: Q.931 (8)  len=10
< Call Ref: len= 2 (reference 17/0x11) (Terminator)
< Message type: CALL PROCEEDING (2)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit  PRI  Spare: 0  Exclusive
Dchan: 0
<                        ChanSel: As indicated in following octets
<                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
<                       Ext: 1  Channel: 1 ]
-- Processing IE 24 (cs0, Channel Identification)
q931.c:3641 q931_receive: call 32785 on channel 1 enters state 3 (Outgoing
call  Proceeding)
    -- Zap/1-1 is proceeding passing it to Local/9467000603 at 3GV-daad,2
< Protocol Discriminator: Q.931 (8)  len=9
< Call Ref: len= 2 (reference 17/0x11) (Terminator)
< Message type: DISCONNECT (69)
< [08 02 82 83]
< Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0
Location: Public network serving the local user (2)
<                  Ext: 1  Cause: No route to destination (3), class =
Normal Event (0) ]
-- Processing IE 8 (cs0, Cause)
q931.c:3784 q931_receive: call 32785 on channel 1 enters state 12
(Disconnect Indication)
    -- Channel 0/1, span 1 got hangup request, cause 3
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
peerstate Disconnect Request
q931.c:2925 q931_release: call 32785 on channel 1 enters state 19 (Release
Request)
> Protocol Discriminator: Q.931 (8)  len=9
> Call Ref: len= 2 (reference 17/0x11) (Originator)
> Message type: RELEASE (77)
> [08 02 81 83]
> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0
Location: Private network serving the local user (1)
>                  Ext: 1  Cause: No route to destination (3), class =
Normal Event (0) ]
    -- Hungup 'Zap/1-1'
  == Everyone is busy/congested at this time (1:0/0/1)
  == Auto fallthrough, channel 'Local/9467000603 at 3GV-daad,2' status is
'CHANUNAVAIL'
  == Auto fallthrough, channel 'Local/9467000603 at 3G-8c88,2' status is
'UNKNOWN'
[Mar 13 11:56:14] NOTICE[16542]: pbx_spool.c:341 attempt_thread: Call failed
to go through, reason (1) Hangup
< Protocol Discriminator: Q.931 (8)  len=5
< Call Ref: len= 2 (reference 17/0x11) (Terminator)
< Message type: RELEASE COMPLETE (90)
q931.c:3724 q931_receive: call 32785 on channel 1 enters state 0 (Null)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null




Could you help me to fix this issue.


Thanks,

Jack


On Fri, Mar 13, 2009 at 9:44 AM, jack nicolson
<jack.nicolson123 at gmail.com>wrote:

> Please ignore the previous message you are right Klaus. There is no zap
> channel i need to start them.
>
>
> Thanks
>
> Jack
>
>
> On Fri, Mar 13, 2009 at 9:20 AM, jack nicolson <jack.nicolson123 at gmail.com
> > wrote:
>
>> Hi Klaus,
>>
>> My normal audio outbound call works fine.only problem with video outbound
>> call.
>>
>> My asterisk box is connected to E1 line through Digium card.
>>
>>
>> Thanks,
>>
>> Jack
>>
>>
>> On Thu, Mar 12, 2009 at 8:30 PM, Klaus Darilion <
>> klaus.mailinglists at pernau.at> wrote:
>>
>>>
>>>
>>> jack nicolson schrieb:
>>> >     -- Executing [9467000603 at 3GV:2] Dial("Local/9467000603 at 3GV-0624
>>> ,2",
>>> > "Zap/g0/9467000603") in new stack
>>> > [Mar 12 19:15:36] WARNING[9206]: channel.c:3027 ast_request: No channel
>>> > type registered for 'Zap'
>>> > [Mar 12 19:15:36] WARNING[9206]: app_dial.c:1183 dial_exec_full: Unable
>>> > to create channel of type 'Zap' (cause 66 - Channel not implemented)
>>> >   == Everyone is busy/congested at this time (1:0/0/1)
>>>
>>>
>>> There is no Zap channel. How are you connected to the PSTN? Zap? Dahdi?
>>> Are normal audio calls work?
>>>
>>> klaus
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-video mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-video
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-video/attachments/20090313/38bf7dd4/attachment.htm 


More information about the asterisk-video mailing list