[Asterisk-video] help for videocall

Sergio Garcia Murillo sergio.garcia at fontventa.com
Fri Feb 22 12:04:20 CST 2008


On Fri, 2008-02-22 at 15:35 +0100, Klaus Darilion wrote:
> 
> barbara_b02 at libero.it wrote:
> > Hi list,
> > first of all: sorry for my bad english...
> > I'm new to Asterisk world... I'm using Asterisk-1.4.13 on Debian distribution.
> > I've tested with success loopback, mp4play, mp4save and IVR calling Asterisk with a 3G mobile phone.
> > Now I'm trying a 3G<->sip videocall (using a NEC-phone and X-lite running on Windows) but I think I'm confused about how to do this... I've read the mailing list archive, the pages on VoIP-info and the instructions on Fontventa but I don't understand how to write my dialplan, especially the order of the following exten...
> > 
> > - h324m_gw()
> > - h324m_gw_answer()     
> > - h324m_call()
> > - Dial()     
> > 
> > I found contradictory configuration examples reading the archive...
> > 
> > And do I need the following exten?
> > 
> > exten => dial,1,Set(CHANNEL(transfercapability)=VIDEO)
> > exten => dial,n,NoOp(transfer=${CHANNEL(transfercapability)})
> > exten => dial,n,Set(CHANNEL(userinformationlayer1)=38)
> > exten => dial,n,NoOp(ul1=${CHANNEL(userinformationlayer1)})
> 
> This is needed for SIP-->3G calls (to make 3G video signalling in ISDN 
> SETUP message), but not needed for 3G-->SIP calls.
> 
> To bridge 3G-->SIP calls:
> 1. Make sure to have AMR codec installed (and configured codecs.conf -> 
> see readme from AMR codec)
> 
> 2. in sip.conf allow videocalls and active h263p for the SIP peer
> 
> 3. MAke proper bandwidth settings in XLITE/eyebeam:
>    deactivate the "zero touch bandwidth detection" and then in the 
> advanced section set the bandwidth to "DSL, Cable".
> 
> 4. In eyebeam/xlite active the H263+ codec
> 
> 5. For testing video calls it might also be useful to deactivate the 
> echo canceler in xlite.
> 
> 6. Don't bother with outgoing calls unless incoming calls are working fine.
> 
> regards
> klaus
> 
> 
> > 
> > ...or maybe I mistakes configuring my X-lite...
> > 
> > Thanks very much for any help!
> > Barbara B.
> > 
> > 
> > 
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> > 
> > asterisk-video mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-video
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-video





More information about the asterisk-video mailing list