[Asterisk-video] H324m library status

[Sergio Garcia Murillo]

Yes I have also tested it with a conceptronic rdsi card using the bristuff
patch, it should work also on any isdn channel
What still needs to be done is modifing the q931 to be able to get/set the
bearer information to the h223/h245.

Greetings
    Sergio

----- Original Message ----- 
From: "matteo brancaleoni" <mbrancaleoni at espia.it>
To: "Development discussion of video media support in Asterisk"
<asterisk-video at lists.digium.com>
Sent: Friday, February 23, 2007 9:27 AM
Subject: Re: [Asterisk-video] H324m library status


> Hi,
>
> On Fri, 2007-02-23 at 09:16 +0100, matteo brancaleoni wrote:
> > is possible have you tested also on BRI, on only PRI ?
> >
> > Since I want to help here, but I have not a PRI,
> > I was thinking to either see if with BRI support works
> > or maybe BRI using visdn.
>
> *urgh*
> sorry for my very bad english... is still early morning,
> and I'm not fully awake :)
>
> Basically the question is: have you tested also on BRI
> interfaces, using any stack ?
>
> I'm asking since I was to give the app a try, and maybe
> help at least in testing, but I have only BRIs here.
>
> If the modifications to libpri are only relative
> to l1 low layer compatibility, maybe I can test it with bristuff.
>
> Or with visdn, since we added full l1 support to it.
> In fact we're able with visdn to make "bridged"
> h324m calls (a video call comes in and gets connected
> to another mobile videophone, dialling out from the same
> BRI).
>
> Hope that now is more clear :)
>
> Greetings,
> Matteo.
>
> -- 
> Matteo Brancaleoni
> R&D Director
> Tel  :+39.02.70633354
> Voip :sip:matteo at sip.voismart.it
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-video
>