[Asterisk-video] H324m library status

[matteo brancaleoni]

Hi,

On Fri, 2007-02-23 at 09:16 +0100, matteo brancaleoni wrote:
> is possible have you tested also on BRI, on only PRI ?
> 
> Since I want to help here, but I have not a PRI,
> I was thinking to either see if with BRI support works
> or maybe BRI using visdn.

*urgh*
sorry for my very bad english... is still early morning,
and I'm not fully awake :)

Basically the question is: have you tested also on BRI
interfaces, using any stack ?

I'm asking since I was to give the app a try, and maybe
help at least in testing, but I have only BRIs here.

If the modifications to libpri are only relative
to l1 low layer compatibility, maybe I can test it with bristuff.

Or with visdn, since we added full l1 support to it.
In fact we're able with visdn to make "bridged"
h324m calls (a video call comes in and gets connected
to another mobile videophone, dialling out from the same
BRI).

Hope that now is more clear :)

Greetings,
Matteo.

-- 
Matteo Brancaleoni
R&D Director
Tel  :+39.02.70633354
Voip :sip:matteo at sip.voismart.it