[asterisk-users] pjsip subscribe (presence) always returns: No matching endpoint found

[Joshua Colp]

On Sun, Nov 19, 2017, at 02:11 PM, Benoit Panizzon wrote:
> Hi Joshua
> 
> thank you for the quick reply
> 
> > Have you checked the Asterisk console when PJSIP is loaded to see if
> > the endpoint did not load for some reason? Does it show up in "pjsip
> > show endpoints"?
> 
> Yes, the endpoint shows up.
> 
>  Endpoint:  11/(scrubbed from mail)                                      
>  Not in use    0 of inf
>      InAuth:  11/11
>         Aor:  11                                                 1
>       Contact:  11/sip:11@[2001:4060:dead:d1d0:204:13ff:fe 58af7d6822
>       Avail         5.799
>   Transport:  transport-udp             udp      0      0  [::]:5061
> 
> I had the qualify statement at the wrong place, but that's sorted out
> now.
> 
> But still, subscribing to the hint results in a 404 error.
> 
> Acutualy, that subscribing is a bit odd, it's a snom M9 phone that is
> trying to subscribe to itself.
> That does not make much sense in my opinion.
> 
> It just that chan_sip reported OK to this and chan_pjsip replies with
> 404.
> Or is pjsip more intelligent and trying to prevent the phone from
> subscribing to itself?

The chan_pjsip module doesn't prevent that. You'd need to provide the
full SUBSCRIBE now that it is actually finding the endpoint and coming
in.

-- 
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org