[asterisk-users] Replacing PBX during a call in progress

[Andres]

On 1/12/17 11:09 AM, Telium Technical Support wrote:
>
> This was asked many years ago but I thought I would check to see if 
> things have changed.  Is it possible to take over a call in progress – 
> using a replacement Asterisk server?
>
One plausible scenario I can think of is if you are running VMware VMs.  
Using the vMotion feature would accomplish subsecond VM live moves.
>
> In other words, if 2 user agents are connected through an Asterisk 
> PBX, and I tracked the call ID, IP of each UA (and anything else 
> needed), could I remove the PBX and put a new one in its place (at the 
> same IP address) and resume the call?  Somehow keeping the call up on 
> the UA’s and telling Asterisk to just resume a call given specified 
> parameters (so the UA’s wouldn’t notice the change)?
>
>
>


-- 
Technical Support
http://www.telesip.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20170112/b0e39046/attachment.html>