[asterisk-users] Replacing PBX during a call in progress

[Dovid Bender]

As Andres mentioned you can use VMWare. Another option would be to send a
re-invite to both devices and send them to another server.


On Thu, Jan 12, 2017 at 12:03 PM, Andres <andres at telesip.net> wrote:

> On 1/12/17 11:09 AM, Telium Technical Support wrote:
>
> This was asked many years ago but I thought I would check to see if things
> have changed.  Is it possible to take over a call in progress – using a
> replacement Asterisk server?
>
> One plausible scenario I can think of is if you are running VMware VMs.
> Using the vMotion feature would accomplish subsecond VM live moves.
>
>
>
> In other words, if 2 user agents are connected through an Asterisk PBX,
> and I tracked the call ID, IP of each UA (and anything else needed), could
> I remove the PBX and put a new one in its place (at the same IP address)
> and resume the call?  Somehow keeping the call up on the UA’s and telling
> Asterisk to just resume a call given specified parameters (so the UA’s
> wouldn’t notice the change)?
>
>
>
>
>
>
>
>
>
>
> --
> Technical Supporthttp://www.telesip.net
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at: https://community.asterisk.
> org/
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20170112/15f80a09/attachment.html>