[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload
Telium Technical Support
support at telium.ca
Mon Aug 29 10:17:05 CDT 2016
Oh! In that case ignore it.
Asterisk won't rebind the adapter if you've only changed parameters. The message is misleading
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor Mazuco
Sent: Monday, August 29, 2016 10:41 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload
Sorry,
I just see warning.
2016-08-29 11:40 GMT-03:00, Vitor Mazuco <vitor.mazuco at gmail.com>:
> I just see warning?
>
>
> 2016-08-29 11:30 GMT-03:00, Telium Technical Support <support at telium.ca>:
>> This shows that asterisk's IAX is already bound to all adapters - so
>> that's
>> good. Symptomatically does your IAX stop working? Or do you just see a
>> warning?
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor
>> Mazuco
>> Sent: Monday, August 29, 2016 8:46 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring
>> bindport/bindaddr
>> on reload
>>
>> Hi, see the log below
>>
>> root at AsteriskSlave:~# ip addr
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
>> group default
>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>> inet 127.0.0.1/8 scope host lo
>> valid_lft forever preferred_lft forever
>> inet6 ::1/128 scope host
>> valid_lft forever preferred_lft forever
>> 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
>> default qlen 1000
>> link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff
>> 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>> state UP group default qlen 1000
>> link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff
>> inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1
>> valid_lft forever preferred_lft forever
>> inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic
>> valid_lft 86398sec preferred_lft 43198sec
>> inet6 fe80::2e0:4cff:fe44:195/64 scope link
>> valid_lft forever preferred_lft forever
>> 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
>> default qlen 1000
>> link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff
>>
>> and
>>
>> root at AsteriskSlave:~# netstat -anp | grep ast
>> tcp 0 0 0.0.0.0:2000 0.0.0.0:*
>> OUÇA 2050/asterisk
>> tcp 0 0 0.0.0.0:5338 0.0.0.0:*
>> OUÇA 2050/asterisk
>> udp 0 0 0.0.0.0:38180 0.0.0.0:*
>> 2050/asterisk
>> udp 0 0 0.0.0.0:4520 0.0.0.0:*
>> 2050/asterisk
>> udp 0 0 0.0.0.0:4659 0.0.0.0:*
>> 2050/asterisk
>> udp 0 0 0.0.0.0:2727 0.0.0.0:*
>> 2050/asterisk
>> udp 0 0 0.0.0.0:5000 0.0.0.0:*
>> 2050/asterisk
>> udp 0 0 0.0.0.0:5089 0.0.0.0:*
>> 2050/asterisk
>> unix 2 [ ACC ] STREAM OUVINDO 484
>> 2050/asterisk /var/run/asterisk/asterisk.ctl
>> unix 2 [ ] DGRAM 11686 2050/asterisk
>>
>> 2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at telium.ca>:
>>> Could you post the result of "ip addr" command, and "netstat -anp | grep
>>> ast" after the reload?
>>>
>>> I suspect something else is going on here...
>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>> http://www.asterisk.org/community/astricon-user-conference
>>>
>>> New to Asterisk? Start here:
>>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>> http://www.asterisk.org/community/astricon-user-conference
>>
>> New to Asterisk? Start here:
>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>> http://www.asterisk.org/community/astricon-user-conference
>>
>> New to Asterisk? Start here:
>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
http://www.asterisk.org/community/astricon-user-conference
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list