[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

Vitor Mazuco vitor.mazuco at gmail.com
Mon Aug 29 10:37:45 CDT 2016


Hummm, but why It is with that problem?

I use UCARP, maybe is this the problem?


2016-08-29 12:17 GMT-03:00, Telium Technical Support <support at telium.ca>:
> Oh!  In that case ignore it.
>
> Asterisk won't rebind the adapter if you've only changed parameters.  The
> message is misleading
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor Mazuco
> Sent: Monday, August 29, 2016 10:41 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr
> on reload
>
> Sorry,
>
> I just see warning.
>
>
>
> 2016-08-29 11:40 GMT-03:00, Vitor Mazuco <vitor.mazuco at gmail.com>:
>> I just see  warning?
>>
>>
>> 2016-08-29 11:30 GMT-03:00, Telium Technical Support <support at telium.ca>:
>>> This shows that asterisk's IAX is already bound to all adapters - so
>>> that's
>>> good.  Symptomatically does your IAX stop working?  Or do you just see a
>>> warning?
>>>
>>> -----Original Message-----
>>> From: asterisk-users-bounces at lists.digium.com
>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor
>>> Mazuco
>>> Sent: Monday, August 29, 2016 8:46 AM
>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring
>>> bindport/bindaddr
>>> on reload
>>>
>>> Hi, see the log below
>>>
>>> root at AsteriskSlave:~# ip addr
>>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
>>> group default
>>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>>     inet 127.0.0.1/8 scope host lo
>>>        valid_lft forever preferred_lft forever
>>>     inet6 ::1/128 scope host
>>>        valid_lft forever preferred_lft forever
>>> 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
>>> default qlen 1000
>>>     link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff
>>> 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>>> state UP group default qlen 1000
>>>     link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff
>>>     inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1
>>>        valid_lft forever preferred_lft forever
>>>     inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic
>>>        valid_lft 86398sec preferred_lft 43198sec
>>>     inet6 fe80::2e0:4cff:fe44:195/64 scope link
>>>        valid_lft forever preferred_lft forever
>>> 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
>>> default qlen 1000
>>>     link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff
>>>
>>> and
>>>
>>> root at AsteriskSlave:~# netstat -anp | grep ast
>>> tcp        0      0 0.0.0.0:2000            0.0.0.0:*
>>> OUÇA       2050/asterisk
>>> tcp        0      0 0.0.0.0:5338            0.0.0.0:*
>>> OUÇA       2050/asterisk
>>> udp        0      0 0.0.0.0:38180           0.0.0.0:*
>>>          2050/asterisk
>>> udp        0      0 0.0.0.0:4520            0.0.0.0:*
>>>          2050/asterisk
>>> udp        0      0 0.0.0.0:4659            0.0.0.0:*
>>>          2050/asterisk
>>> udp        0      0 0.0.0.0:2727            0.0.0.0:*
>>>          2050/asterisk
>>> udp        0      0 0.0.0.0:5000            0.0.0.0:*
>>>          2050/asterisk
>>> udp        0      0 0.0.0.0:5089            0.0.0.0:*
>>>          2050/asterisk
>>> unix  2      [ ACC ]     STREAM     OUVINDO       484
>>> 2050/asterisk       /var/run/asterisk/asterisk.ctl
>>> unix  2      [ ]         DGRAM                    11686    2050/asterisk
>>>
>>> 2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at telium.ca>:
>>>> Could you post the result of "ip addr" command, and "netstat -anp | grep
>>>> ast" after the reload?
>>>>
>>>> I suspect something else is going on here...
>>>>
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>>>       http://www.asterisk.org/community/astricon-user-conference
>>>>
>>>> New to Asterisk? Start here:
>>>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>>       http://www.asterisk.org/community/astricon-user-conference
>>>
>>> New to Asterisk? Start here:
>>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>>       http://www.asterisk.org/community/astricon-user-conference
>>>
>>> New to Asterisk? Start here:
>>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>       http://www.asterisk.org/community/astricon-user-conference
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>       http://www.asterisk.org/community/astricon-user-conference
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list