[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

Vitor Mazuco vitor.mazuco at gmail.com
Mon Aug 29 09:40:34 CDT 2016


Sorry,

I just see warning.



2016-08-29 11:40 GMT-03:00, Vitor Mazuco <vitor.mazuco at gmail.com>:
> I just see  warning?
>
>
> 2016-08-29 11:30 GMT-03:00, Telium Technical Support <support at telium.ca>:
>> This shows that asterisk's IAX is already bound to all adapters - so
>> that's
>> good.  Symptomatically does your IAX stop working?  Or do you just see a
>> warning?
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor
>> Mazuco
>> Sent: Monday, August 29, 2016 8:46 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring
>> bindport/bindaddr
>> on reload
>>
>> Hi, see the log below
>>
>> root at AsteriskSlave:~# ip addr
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
>> group default
>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>     inet 127.0.0.1/8 scope host lo
>>        valid_lft forever preferred_lft forever
>>     inet6 ::1/128 scope host
>>        valid_lft forever preferred_lft forever
>> 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
>> default qlen 1000
>>     link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff
>> 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>> state UP group default qlen 1000
>>     link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff
>>     inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1
>>        valid_lft forever preferred_lft forever
>>     inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic
>>        valid_lft 86398sec preferred_lft 43198sec
>>     inet6 fe80::2e0:4cff:fe44:195/64 scope link
>>        valid_lft forever preferred_lft forever
>> 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
>> default qlen 1000
>>     link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff
>>
>> and
>>
>> root at AsteriskSlave:~# netstat -anp | grep ast
>> tcp        0      0 0.0.0.0:2000            0.0.0.0:*
>> OUÇA       2050/asterisk
>> tcp        0      0 0.0.0.0:5338            0.0.0.0:*
>> OUÇA       2050/asterisk
>> udp        0      0 0.0.0.0:38180           0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:4520            0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:4659            0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:2727            0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:5000            0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:5089            0.0.0.0:*
>>          2050/asterisk
>> unix  2      [ ACC ]     STREAM     OUVINDO       484
>> 2050/asterisk       /var/run/asterisk/asterisk.ctl
>> unix  2      [ ]         DGRAM                    11686    2050/asterisk
>>
>> 2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at telium.ca>:
>>> Could you post the result of "ip addr" command, and "netstat -anp | grep
>>> ast" after the reload?
>>>
>>> I suspect something else is going on here...
>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>>       http://www.asterisk.org/community/astricon-user-conference
>>>
>>> New to Asterisk? Start here:
>>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>       http://www.asterisk.org/community/astricon-user-conference
>>
>> New to Asterisk? Start here:
>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>       http://www.asterisk.org/community/astricon-user-conference
>>
>> New to Asterisk? Start here:
>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



More information about the asterisk-users mailing list