[asterisk-users] PJSIP and Kamailio without registration

Matthew Jordan mjordan at digium.com
Thu Mar 12 19:22:24 CDT 2015


On Thu, Mar 12, 2015 at 5:11 PM, Chirag Desai <djchillerz at gmail.com> wrote:
>
>
>> From: Matthew Jordan <mjordan at digium.com>
>>
>>
>> >> If the INVITE request is not shown in the CLI with 'pjsip set logger
>> >> on', then Asterisk is not actually receiving the request.
>> >>
>> >> Does a pcap show the message being sent to the correct IP/port? If you
>> >> change the transports to bind to port 5060, does that change anything?
>>
>>
>
>>The sip message I included in my last message is what I see when I ngrep on
>> 5061, but >asterisk doesn't see it. When I tell Kamailio to send the message
>> to 5060 chan_sip shows >the invite in the CLI.
>>
>> My setup has chan_sip running on 5060 and pjsip (tcp and udp on 5061).
>>
>> I'll get PJSIP running on 5060 and see if that makes any difference.
>
> UPDATE: I got PJSIP on 5060 and everything is working fine as expected and I
> can see the calls from Kamalio. Is this a bug with asterisk not recognising
> the traffic on 5061 even though the SIP messages are being received by the
> server on that port and I can see it?
>

I suspect not. We run the PJSIP stack on multiple ports quite often. I
would guess that there's something else going on here.

-- 
Matthew Jordan
Digium, Inc. | Director of Technology
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: http://digium.com & http://asterisk.org



More information about the asterisk-users mailing list