[asterisk-users] [DAHDI] qozap instead of wcb4xxp

[Simon Vargas]

Hello,
 
I have a Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] card which seems to work on 1 machine but not on another. It SHOULD load this driver:
 
>dahdi_hardware -v
pci:0000:00:00.0     wcb4xxp+     1397:08b4 Junghanns QuadBRI ISDN card

Instead of:

>dahdi_hardware -v
pci:0000:00:00.0     qozap-       1397:08b4 Generic Cologne ISDN card

There is no qozap modul in lib/modules but I tried to blacklist it anyway. The consequences that the card is not working in the second machine with the same dahdi config/kernel:

Sarting background readahead: [  OK  ]
Checking for hardware changes [  OK  ]
Starting dahdi:  Loading DAHDI hardware modules:
  wct4xxp:  [  OK  ]
  wcb4xxp:  [  OK  ]

No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg:  DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
[FAILED]
[FAILED]

lspci
=====

0:00.0 Non-VGA unclassified device: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Region 0: I/O ports at 4000 [disabled] [size=8]
	Region 1: Memory at e0200000 (32-bit, non-prefetchable) [disabled] [size=4K]

lsmod
=====
Module                  Size  Used by
bluetooth              53925  2 
ipv6                  267617  19 
xfrm_nalgo             13381  1 ipv6
crypto_api             12609  1 xfrm_nalgo
autofs4                29253  3 
i2c_dev                12613  0 
i2c_core               23745  1 i2c_dev
lockd                  63209  0 
sunrpc                145533  2 lockd
wcb4xxp                76708  0 
wct4xxp               348896  0 
dahdi                 196296  4 wcb4xxp,wct4xxp
crc_ccitt               6337  1 dahdi
loop                   18889  0 
dm_mirror              24521  0 
dm_multipath           24909  0 
scsi_dh                11713  1 dm_multipath
scsi_mod              142485  1 scsi_dh
parport_pc             29157  0 
lp                     15849  0 
parport                37641  2 parport_pc,lp
pcspkr                  7105  0 
xennet                 29769  0 [permanent]
dm_raid45              67273  0 
dm_message              6977  1 dm_raid45
dm_region_hash         15809  1 dm_raid45
dm_log                 14657  3 dm_mirror,dm_raid45,dm_region_hash
dm_mod                 63225  4 dm_mirror,dm_multipath,dm_raid45,dm_log
dm_mem_cache            9921  1 dm_raid45
xenblk                 20149  3 
ext3                  124873  2 
jbd                    57065  1 ext3
uhci_hcd               25677  0 
ohci_hcd               24937  0 
ehci_hcd               34253  0 


 /etc/init.d/dahdi stop
Unloading DAHDI hardware modules: ERROR: Module dahdi is in use
error
+ /etc/init.d/dahdi start
Loading DAHDI hardware modules:
  wct4xxp:                                                 [  OK  ]
  wcb4xxp:                                                 [  OK  ]

No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg:  DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
                                                           [FAILED]
/usr/sbin/dahdi_cfg -vvvvvvvv
DAHDI Tools Version - 2.3.0

DAHDI Version: 2.3.0.1
Echo Canceller(s): 
Configuration
======================

SPAN 1: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 3: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 4: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 06)
Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
Channel 09: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 09)
Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
Channel 12: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 12)

12 channels to configure.

DAHDI_SPANCONFIG failed on span 1: No such device or address (6)

Putting the card to other slot doesn't help. That would be nice if some of the developers of this hardware would be around here.

Thanks!