[asterisk-users] issue after install dahdi

[Salaheddine Elharit]

hi

the issue has been solved after change the span from span =1,1,0,ccs,hdb3
to span =1,0,0,ccs,hdb3
thanks for everyone


2013/10/22 Salaheddine Elharit <salah.elharit200 at gmail.com>

> 2013/10/22, A J Stiles <asterisk_list at earthshod.co.uk>:
> > On Tuesday 22 October 2013, Salaheddine Elharit wrote:
> >> hello yes this is a fresh install
> >>
> >> [trunkgroups]
> >> trunkgroup => 1,16
> >> spanmap => 1,1,1
> >>
> >> [channels]
> >> #include dahdi-channels.conf
> >>
> >> context=default
> >> hidecallerid=no
> >> callwaiting=yes
> >> usecallingpres=yes
> >> callwaitingcallerid=yes
> >> threewaycalling=yes
> >> transfer=yes
> >> canpark=yes
> >> cancallforward=yes
> >> callreturn=yes
> >> rxgain=0.0
> >> txgain=0.0
> >>
> >> group=1
> >> switchtype=euroisdn
> >> signalling=pri_cpe
> >> callgroup=1
> >> pickupgroup=1
> >> immediate=no
> >> channel => 1-15,17-31
> >>
> >> the issue h=just with group 1 can not call via G1
> >>
> >> with group 2 theris no problem
> >>
> >> group=2
> >> callgroup=2
> >> switchtype=qsig
> >> signalling=pri_net
> >> callerid=520xxxxxx
> >> immediate=no
> >> channel => 32-46,48-52
> >>
> >>
> >> thanks and regards
> >
> > If group 2 works the way you want it to, then it must be configured
> > correctly;
> > meaning you just need to configure group 1 to match group 2.  So, *make a
> > backup copy* of your chan_dahdi.conf first, in case this goes horribly
> wrong
> >
> > and you can't even remember where you started from, and try:
> >
> > group=1
> > ;switchtype=euroisdn
> > switchtype=qsig
> > ;signalling=pri_cpe
> > signalling=pri_net
> > callgroup=1
> > pickupgroup=1
> > immediate=no
> > channel => 1-15,17-31
> >
> >
> > Then power the server off and on, to make sure DAHDI and Asterisk restart
> > from
> > scratch.
> >
> >
> > If that works, congratulations, you've fixed it.  However, I don't think
> it
> >
> > will.  "switchtype=euroisdn" and "signalling=pri_cpe" are the correct
> > settings
> > for plugging into an ISDN-30 exchange line.  "pri_net" makes the card
> behave
> >
> > as though it was the exchange end  (like FXS on steroids).
> >
> > Can you post the contents of /etc/dahdi/system.conf ?
> >
> > --
> > AJS
> >
> > Answers come *after* questions.
> >
> > --
> > _____________________________________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> > New to Asterisk? Join us for a live introductory webinar every Thurs:
> >                http://www.asterisk.org/hello
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> hello
>
> thanks for your response i have try to do this but the issue still the same
>
> NB: the group 1 is for the first provider and the secend is for the
> secend provider
>
>
> if the issue still the same can i call my provider becouse for the
> inbound call is ok bat the issue is for the outban calls
>
>
> below etc/dahdi/system.conf
>
>
> # Autogenerated by /usr/sbin/dahdi_genconf on Thu Oct 17 12:37:31 2013
> # If you edit this file and execute /usr/sbin/dahdi_genconf again,
> # your manual changes will be LOST.
> # Dahdi Configuration File
> #
> # This file is parsed by the Dahdi Configurator, dahdi_cfg
> #
> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
> span=1,1,0,ccs,hdb3
> # termtype: te
> bchan=1-15,17-31
> dchan=16
> echocanceller=mg2,1-15,17-31
>
> # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
> span=2,2,0,ccs,hdb3
> # termtype: te
> bchan=32-46,48-62
> dchan=47
> echocanceller=mg2,32-46,48-62
>
> # Global data
>
> loadzone        = fr
> defaultzone     = fr
>
> thanks and regards
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20131023/b93723c8/attachment-0001.html>