[asterisk-users] Meetme and MEETME_EXIT_CONTEXT

[Jonas Kellens]

Hello,

what is the equivalent parameter of X in the ConfBridge()-command ?

How can you exit ConfBridge by pressing a digit ?


Concerning MeetMe() :
Verbosity is 25 and I still don't see anything on the console or in the 
logs when pressing '0' (zero).


Kind regards,
Jonas.


On 02/20/2013 03:32 PM, Rusty Newton wrote:
> ----- Original Message -----
>> From: "Jonas Kellens" <jonas.kellens at telenet.be>
>> But nothing happens when pressing 0 (zero).
> Why not check the logs in /var/log/asterisk/full ?.  Make sure you have the full log enabled in logger.conf and that you have VERBOSE,DEBUG,DTMF type messages going to it.  You can also push those to the console and watch what happens when you press zero. On the console be sure to turn up verbosity with "core set verbose 5"
>
> If you can't tell what is happening, post a pastebin link to the log and point out (via timestamp or otherwise) where you would expect to see the DTMF digit. Maybe someone will be able to take a look.
>
> I'd also really recommend using ConfBridge which is newer than MeetMe. If you switch to ConfBridge I'd recommend an upgrade to the latest 1.8.X as well.
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130220/1a91c52c/attachment.htm>