[asterisk-users] Can't detect remote answer

Matthew Fredrickson creslin at digium.com
Mon Feb 11 15:32:46 CST 2013


Hey,

Just quickly glanced over your data... one problem you have is that 
you're passing the 'r' flag in your Dial() statement in extensions.conf. 
  That would definitely cause you to have never ending ringback from the 
analog line (since answer supervision is often not present).  You might 
try removing that and retry your outbound call test.

Hope that helps a bit.

Matthew Fredrickson
Digium, Inc.

On 2/11/13 10:54 AM, Kevin Wright wrote:
>
> I forgot to add, cat /proc/dahdi/* yields:
>
> Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
>
>    1 WCTDM/4/0 FXSKS (In use) (EC: MG2 - INACTIVE)
>    2 WCTDM/4/1 FXOKS (EC: MG2 - INACTIVE)
>    3 WCTDM/4/2 Reserved
>    4 WCTDM/4/3 Reserved
>
>
> I'm not sure if that (in use) is correct when I'm not actively in a call.
>
> This is a very sensitive setup, as a home installation it absolutely
> *must* pass the gruelling "wife test", so I'm keen to see it up and
> running properly :)
>
>
> On 11 February 2013 16:50, Kevin Wright <kev.lee.wright at gmail.com
> <mailto:kev.lee.wright at gmail.com>> wrote:
>
>
>     I'm attempting to place an outgoing call over POTS/DAHDI, it dials
>     without problem but the remote answer isn't tried.
>
>     So far I've attempted:
>
>       * Searching on google
>       * Enabling full and verbose logging (including the debug option of
>         the DAHDI module) - showing NO event at the time I answer on the
>         remote phone a.k.a "my mobile"
>       * Using another phone on the same line - it works
>       * Receiving a call on that line - no problem
>       * Logging DTMF - it shows digits dialled on my mobile, after I've
>         answered, even whilst it seems to still be ringing locally
>       * Looking on the wiki
>       * Asking on IRC
>
>     So far, I've found nothing that helps.
>
>     A sample log output is here: http://pastebin.com/cprZSy9i
>     And my chan_dahdi.conf: http://pastebin.com/L7mBJ66Y
>     And dahdi system.conf: http://pastebin.com/6UQPVC9x
>     also in modprobe.d/dahdi.conf: http://pastebin.com/5ZqtcZdj
>
>     *any* advice/suggestions at this point would be very much appreciated!
>
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                 http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users
>




More information about the asterisk-users mailing list