[asterisk-users] Freepbx + Asterisk problem - NEED HELP

[Mehmet Kuzulugil]

Hello,
After installing on Ubuntu 10.04 using the tutorial on 
http://hmontoliu.blogspot.com/2010/03/installing-asterisk-and-freepbx-on.html
I have a running instance of Asterisk.

PROBLEM: result of dahdi_cfg:
DAHDI Tools Version - 2.2.1

DAHDI Version: 2.2.1
Echo Canceller(s): MG2
Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)

4 channels to configure.

Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2

The problem is about asterisk CLI results:
asterisk*CLI> dahdi show status
Description                              Alarms  IRQ    bpviol CRC4   
Fra Codi Options  LBO
Wildcard TDM400P REV I Board 5           OK      0      0      0      
CAS Unk  YEL      0 db (CSU)/0-133 feet (DSX-1)

asterisk*CLI> dahdi show channels
    Chan Extension  Context         Language   MOH Interpret        
Blocked    State
  pseudo            default                    
default                         In Service

-----------
INFO:
related lspci result:
07:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN 
interface

related dahdi_hardware result:
pci:0000:07:00.0     wctdm+       e159:0001 Wildcard TDM400P REV I

One more thing:
root at asterisk:~# lsmod|grep dahdi
dahdi_echocan_mg2       5729  4
dahdi_transcode         6836  1 wctc4xxp
dahdi_voicebus         41854  2 wctdm24xxp,wcte12xp
dahdi                 210885  12 
dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp
crc_ccitt               1675  2 dahdi,hisax

it seems my dahdi/system.conf is ok.
# Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER)
fxsks=1
echocanceller=mg2,1
fxsks=2
echocanceller=mg2,2
fxoks=3
echocanceller=mg2,3
fxoks=4
echocanceller=mg2,4

# Global data

loadzone    = tr
defaultzone    = tr

And this is zapata.conf:
[channels]
language=en

; include zap extensions defined in AMP
#include zapata_additional.conf

; XTDM20B Port #1,2 plugged into PSTN
;AMPLABEL:Channel %c - Button %n
context=from-pstn
faxdetect=incoming
echotraining=800
group=0
busydetect=yes
busycount=4
hanguponpolarityswitch
relaxdtmf=yes
callprogress=yes
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=2.0
txgain=2.0
immediate=yes
signalling=fxs_ks
channel=1-2




Is it anything related to COUNTRY?

Any advice?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100901/04722fe0/attachment-0001.htm