[asterisk-users] Conflict between jumper settings and dmesg with?OctoBRI

[Tzafrir Cohen]

On Sat, May 29, 2010 at 06:43:19PM +0200, Ron Arts wrote:
> Op 29-05-10 17:33, Tzafrir Cohen schreef:
> > On Fri, May 28, 2010 at 11:53:34PM +0000, Andre wrote:
> >> Hi!
> >>
> >> Try this patch. IF you apply it you can tell dahdi the port mode to use like this
> >> modprobe wcb4xxp port_mode=0,0,1,1
> >
> > Thanks for your patch. However:
> >
> > Don't those cards have jumpers that set (that is: hardwire) TE / NT mode?
> > If so, why should I need to provide it again?
> >
> 
> Well,
> 
> This comes in very handy when a server is in a remote location.
> Or you just want to always set it from the software, and eliminate
> user (or co-worker ;) error.

You don't seem to understand what I mean by "hardwired": IIRC such a
parameter would be useless as you can't override the jumper settings in
this case.

If you can override, then I agree it would be useful. Though my issue
with using it for a multi-card setting still stands.

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir