[asterisk-users] SOLVED - Re: Asterisk analog DID with Adit 600

[Dave Fullerton]

Dave Fullerton wrote:
> Hello All,
> 
> I'm trying to connect Asterisk to an Executone phone system with an 
> analog DID card and I'm hoping someone can help me figure out what I'm 
> doing wrong. The Executone DID card provides battery to the telco, when 
> the telco wishes to dial a DID it goes off-hook, waits for a wink from 
> the Executone and then dials the last three digits on the number with 
> pulse (as opposed to DTMF) signalling.
> 
> What I've done is purchase an Adit 600 with an FXO card. I've set the 
> Adit T1 controller to use E&M signalling and the FXO card to use DPT 
> signalling. I've set asterisk to use E&M in both dahdi/system.conf and 
> chan_dahdi.conf.
> 
> If I dial the port connected to the DID card it goes off hook but when 
> the Executone winks Asterisk or the Adit thinks the remote side has hung 
> up and terminates the call.
> 
> I've tried using E&M wink, featd, and featb signalling in 
> chan_dahdi.conf, set hanguponpolarityswitch=no, and tried loop start 
> signalling for the heck of it and that didn't work either.
> 
> Does anyone have any suggestions of additional things I could try?
> 
> Thanks in advance,
> 
> -Dave

Please disregard. Everything works much better when the wires are 
connected to the correct pair. I had the tip of pair A and the ring from 
pair B.

Thanks anyways.

-Dave