[asterisk-users] AudioCodes Caller ID

[Joseph]

On 12/31/09 13:06, Kevin P. Fleming wrote:
>Joseph wrote:
>> I'm having problem passing Caller ID to asterisk from AudioCodes MP-114 (FXO)
>>
>> AudioCodes is passing the caller ID to Asterisk but Asterisk is trying to interpret it as authentication:
>>
>> [Dec 31 11:41:07] WARNING[9752]: chan_sip.c:8553 check_auth: username mismatch, have <pstn-5665>, digest has <pstn-1270>
>> [Dec 31 11:41:07] NOTICE[9752]: chan_sip.c:14316 handle_request_invite: Failed to authenticate user "KMIEC Z" <sip:7804715665 at 10.0.0.157>;tag=1c354211286
>>
>> Calls go through but not Caller ID.
>> Any suggestions?
>
>Asterisk does not fully support domain authentication yet, so the
>'username' present in the From header is used for authentication *and*
>Caller ID. That means that if you want proper Caller ID to be extracted
>from a SIP INVITE, you can't request authentication on that INVITE.
>
>If you configure the SIP user/peer that you are using for that gateway
>with 'insecure=invite', Asterisk will accept INVITEs from it without
>requiring authentication.

type=peer
insecure=invite

I get the same and in addition call is not even forwarded to asterisk, it just keeps ringing.

[Dec 31 14:42:34] WARNING[13715]: chan_sip.c:8553 check_auth: username mismatch, have <pstn-5665>, digest has <pstn-1270>
[Dec 31 14:42:34] NOTICE[13715]: chan_sip.c:14316 handle_request_invite: Failed to authenticate user <sip:pstn-1270 at 10.0.0.157>;tag=1c1796801183

-- 
Joseph