[asterisk-users] AudioCodes Caller ID

[Joseph]

On 12/31/09 13:06, Kevin P. Fleming wrote:
>Joseph wrote:
>> I'm having problem passing Caller ID to asterisk from AudioCodes MP-114 (FXO)
>>
>> AudioCodes is passing the caller ID to Asterisk but Asterisk is trying to interpret it as authentication:
>>
>> [Dec 31 11:41:07] WARNING[9752]: chan_sip.c:8553 check_auth: username mismatch, have <pstn-5665>, digest has <pstn-1270>
>> [Dec 31 11:41:07] NOTICE[9752]: chan_sip.c:14316 handle_request_invite: Failed to authenticate user "KMIEC Z" <sip:7804715665 at 10.0.0.157>;tag=1c354211286
>>
>> Calls go through but not Caller ID.
>> Any suggestions?
>
>Asterisk does not fully support domain authentication yet, so the
>'username' present in the From header is used for authentication *and*
>Caller ID. That means that if you want proper Caller ID to be extracted
>from a SIP INVITE, you can't request authentication on that INVITE.
>
>If you configure the SIP user/peer that you are using for that gateway
>with 'insecure=invite', Asterisk will accept INVITEs from it without
>requiring authentication.

I've tried in sip.conf
insecure=invite 
with user and peer still the same error and caller ID is not extracted.

[pstn-1270] ; incoming/outgoing calls on FXO port 479-1270
type=peer
secret=xxx
username=pstn-5665
insecure=invite
host=dynamic
disallow=all   
allow=ulaw     
allow=alaw    
nat=no
context=incoming
callgroup=1
pickupgroup=1

Looking at this post it might be a bug in asterisk 1.4 (I'm using 1.4.22.1)
https://issues.asterisk.org/view.php?id=9044

-- 
Joseph