[asterisk-users] G729 Pass through

[Dovey Forman]

I have – but I don’t see why that would be required for pass – through?

The codec purchase should only be required if I wanted to leave voicemail in
G729 or MOH.



If my end points support G729 and I am advertising it in the invite, and
negotiating it with the 200OK, I don’t see why its not allowing pass
through.



--Dovey


 ------------------------------

*From:* asterisk-users-bounces at lists.digium.com [mailto:
asterisk-users-bounces at lists.digium.com] *On Behalf Of *James A. Shigley
*Sent:* Friday, December 11, 2009 1:16 PM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* Re: [asterisk-users] G729 Pass through



Have you paied for and imported g729 licenses from digium so that asterisks
can use g729?



http://store.digium.com/productview.php?category_id=5&product_code=8G729CODEC



James Shigley

*Monroe** Telephone Answering Service*

409-981-9213**

Infinity 5.51,UC 4.02.3803, Blink 3.0.104

Ecreator:2.21, eResponse 1.1.7

Webportal,WebApps,



CONFIDENTIALITY NOTICE: This email, including any attachments, contains
information which may be confidential or privileged. The information =is
intended to be for the use of the individual or entity named above. If you
are not the intended recipient, be aware that any disclosure, copying,
distribution or use of the contents of this information is prohibited. If
you have received this email in error, please notify the sender immediately
by "reply to sender only" message and destroy all electronic and hard copies
of the communication, including attachments.



[image: cid:image003.png at 01C9F268.65A4F5C0]



*From:* asterisk-users-bounces at lists.digium.com [mailto:
asterisk-users-bounces at lists.digium.com] *On Behalf Of *Dovey Forman
*Sent:* Friday, December 11, 2009 12:06 PM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* [asterisk-users] G729 Pass through
*Importance:* High



Hi;



I am running Asterisk (Trix) 1.2.17 with Aastra 6731i phones as my
endpoints.



It seems that when I enable G729 on my peers in sip.conf and make a call I
am getting the following errors:



Called crp_uk/806575011971553141421

Dec 11 07:57:10 WARNING[31903] channel.c: Unable to find a codec translation
path from g729 to ulaw

Dec 11 07:57:10 WARNING[20633] chan_sip.c: Asked to transmit frame type 256,
while native formats is 4 (read/write = 4/4)



Both my end points (Aastra phone) and my sip carrier support G729, so this
should be simple pass-through.



Snippet of my peer crp_uk:



[crp_uk]

disallow=all

allow=ulaw

allow=alaw

allow=g729
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091211/1f78dafe/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 5478 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20091211/1f78dafe/attachment.jpeg