[asterisk-users] DAHDI outgoing

[Danny Nicholas]

Simple explanation for #1; it's dial tech/port/number.  Dahdi/3 would open
DAHDI port 3 for an outgoing call.

 

For #2, you should be using core show channels instead of dahdi show
channels.  Dsc shows the lines that are available to asterisk, csc shows the
ones in use.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mike
Sent: Friday, December 04, 2009 1:02 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [asterisk-users] DAHDI outgoing

 

Hi,

 

I'm having alot of trouble understanding how to use dialplans for outgoing
calls on Dahdi.  

 

Context : I have 3 TI spans, so 69 voice channels and three D channels
(24,48,72).  This is on a TE420B from Digium, if it matters.

 

Here are my (apparently simple) questions in no particular order:

 

1) Dial(DAHDI/5555555555|20) doesn't work.  But Dial(DAHDI/42/5555555555|20)
does work.  How is this "42" parameter used? I see plenty of examples
around, but no explanations. Is this the channel? If so, why doesn't DAHDI/3
work?

 

2) "dahdi show channels" in the CLI show my inbound used channels correctly,
but not my outbound.  My outbound never show up, even during a conversation.

 

Thanks for helping me figure this out.

 

Mike

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091204/adc7c167/attachment.htm