[asterisk-users] Cisco 7906g & SIP

Fri Oct 17 04:08:11 CDT 2008

Hi Duncan,
yes I have a tftp server (I use also Cisco 7941G that use tftp server for 
upload configuration) and I know this function, but now my problem is that 
the phone is stopped on the initial screen that show 'upgrading' and MAC 
address and the process not continued.
Thanks.

------

   Salvatore.

----- Original Message ----- 
From: "Duncan Turnbull" <duncan at e-simple.co.nz>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Tuesday, October 14, 2008 8:52 PM
Subject: Re: [asterisk-users] Cisco 7906g & SIP

> Hi Salvatore
>
> Do you have a TFTP server that serves the phone configuration files?
> This is very separate to the phone, i.e. on a server/pc somewhere, and
> will log all the file requests it receives. You can check this
> irrespective of the phone
>
> Have you checked whether tftp requests are being made, usually they come
>  before the system goes into the upgrading state.
>
> I have had that before and it was caused by having different load files
> from that specified in the OS79XX.TXT file which for my phones usually
> have P003-08-6-00 but for upgrading I start from P0S30202
>
> For SIPDefault.cnf you also need the image version to match
> #Image Version
> image_version:P0S3-08-6-00 ;
>
> But for conversion I first go to this image
> image_version:P0S30202 ;
>
> And I go from that to this
>
> image_version:P0S3-06-2-00 ;
>
> then to the current version
>
>
> And I have these files on my tftpserver which are the respective firmwares
>
> -rwxr-xr-x 1 root root 753560 2007-04-23 14:36 P0S3-08-6-00.sb2
> -rwxr-xr-x 1 root root    459 2007-04-23 14:36 P0S3-08-6-00.loads
> -rwxr-xr-x 1 root root 130228 2007-04-23 14:36 P003-08-6-00.sbn
> -rwxr-xr-x 1 root root 129824 2007-04-23 14:36 P003-08-6-00.bin
> -rwxr-xr-x 1 root root 486974 2007-04-27 14:51 P0S3-06-2-00.sbn
> -rwxr-xr-x 1 root root 486570 2007-04-27 14:51 P0S3-06-2-00.bin
> -rwxr-xr-x 1 root root 392214 2007-04-27 14:51 P0S30202.bin
>
> I can't recall if I need all the 08-6 versions
>
> Cheers Duncan
>
>
> Sasa wrote:
>> Hi Duncan,
>> I have tried more times to make the reset phone but is displays always 
>> and
>> only  'upgrading' and MAC address and I cann't access the phone
>> configuration.
>> Thanks.
>>
>> ------
>>
>>    Salvatore.
>>
>>
>>
>> ----- Original Message ----- 
>> From: "Duncan Turnbull" <duncan at e-simple.co.nz>
>> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>> <asterisk-users at lists.digium.com>
>> Sent: Tuesday, October 14, 2008 11:41 AM
>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>
>>
>>> Hi Salvatore
>>>
>>> You need to look at the logs of the tftp server, not the phone.
>>> Hopefully you can see the ip address of the phone asking for files
>>>
>>> If there is nothing at all being requested from the tftp server then you
>>> probably want to reset the phone to defaults again.
>>>
>>> Usually it stalls when you have some mismatches in the config files. But
>>> it almost always asks for the default files.
>>>
>>> From the files requested you can determine whether its asking for SIP
>>> or SCCP files, and if SIP which version of firmware for the phone
>>>
>>> Cheers Duncan
>>>
>>> Sasa wrote:
>>>> Hi Dave,
>>>> I don't view nothing in tftp server because the phone is stopped on 
>>>> start
>>>> screen with displayed 'upgrading' and MAC address..I don't understand
>>>> what
>>>> happened after the reset. phone
>>>> Regards.
>>>>
>>>> ------
>>>>
>>>>    Salvatore.
>>>>
>>>>
>>>>
>>>> ----- Original Message ----- 
>>>> From: "David Gibbons" <dave at videon-central.com>
>>>> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>>>> <asterisk-users at lists.digium.com>
>>>> Sent: Monday, October 13, 2008 4:29 PM
>>>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>>>
>>>>
>>>>> Hi Salvatore,
>>>>>
>>>>> I'm talking about the tftp logs on the tftp server:
>>>>>
>>>>> Something like 'tail -f /var/log/tftp' or 'tail -f /var/log/messages'
>>>>> should do the trick.
>>>>>
>>>>> Dave
>>>>>
>>>>> -----Original Message-----
>>>>> From: asterisk-users-bounces at lists.digium.com
>>>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sasa
>>>>> Sent: Monday, October 13, 2008 9:57 AM
>>>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>>>>
>>>>> I cann't view phone log files because, after reboot, the phone is
>>>>> stopped
>>>>> on
>>>>> this screen ( 'upgrading' with MAC address) !
>>>>> Regards.
>>>>>
>>>>> ------
>>>>>
>>>>>   Salvatore.
>>>>>
>>>>>
>>>>>
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 