[asterisk-users] Cisco 7906g & SIP

[Duncan Turnbull]

Hi Salvatore

Do you have a TFTP server that serves the phone configuration files? 
This is very separate to the phone, i.e. on a server/pc somewhere, and 
will log all the file requests it receives. You can check this 
irrespective of the phone

Have you checked whether tftp requests are being made, usually they come 
  before the system goes into the upgrading state.

I have had that before and it was caused by having different load files 
from that specified in the OS79XX.TXT file which for my phones usually 
have P003-08-6-00 but for upgrading I start from P0S30202

For SIPDefault.cnf you also need the image version to match
#Image Version
image_version:P0S3-08-6-00 ;

But for conversion I first go to this image
image_version:P0S30202 ;

And I go from that to this

image_version:P0S3-06-2-00 ;

then to the current version


And I have these files on my tftpserver which are the respective firmwares

-rwxr-xr-x 1 root root 753560 2007-04-23 14:36 P0S3-08-6-00.sb2
-rwxr-xr-x 1 root root    459 2007-04-23 14:36 P0S3-08-6-00.loads
-rwxr-xr-x 1 root root 130228 2007-04-23 14:36 P003-08-6-00.sbn
-rwxr-xr-x 1 root root 129824 2007-04-23 14:36 P003-08-6-00.bin
-rwxr-xr-x 1 root root 486974 2007-04-27 14:51 P0S3-06-2-00.sbn
-rwxr-xr-x 1 root root 486570 2007-04-27 14:51 P0S3-06-2-00.bin
-rwxr-xr-x 1 root root 392214 2007-04-27 14:51 P0S30202.bin

I can't recall if I need all the 08-6 versions

Cheers Duncan


Sasa wrote:
> Hi Duncan,
> I have tried more times to make the reset phone but is displays always and 
> only  'upgrading' and MAC address and I cann't access the phone 
> configuration.
> Thanks.
> 
> ------
> 
>    Salvatore.
> 
> 
> 
> ----- Original Message ----- 
> From: "Duncan Turnbull" <duncan at e-simple.co.nz>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
> <asterisk-users at lists.digium.com>
> Sent: Tuesday, October 14, 2008 11:41 AM
> Subject: Re: [asterisk-users] Cisco 7906g & SIP
> 
> 
>> Hi Salvatore
>>
>> You need to look at the logs of the tftp server, not the phone.
>> Hopefully you can see the ip address of the phone asking for files
>>
>> If there is nothing at all being requested from the tftp server then you
>> probably want to reset the phone to defaults again.
>>
>> Usually it stalls when you have some mismatches in the config files. But
>> it almost always asks for the default files.
>>
>> From the files requested you can determine whether its asking for SIP
>> or SCCP files, and if SIP which version of firmware for the phone
>>
>> Cheers Duncan
>>
>> Sasa wrote:
>>> Hi Dave,
>>> I don't view nothing in tftp server because the phone is stopped on start
>>> screen with displayed 'upgrading' and MAC address..I don't understand 
>>> what
>>> happened after the reset. phone
>>> Regards.
>>>
>>> ------
>>>
>>>    Salvatore.
>>>
>>>
>>>
>>> ----- Original Message ----- 
>>> From: "David Gibbons" <dave at videon-central.com>
>>> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>>> <asterisk-users at lists.digium.com>
>>> Sent: Monday, October 13, 2008 4:29 PM
>>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>>
>>>
>>>> Hi Salvatore,
>>>>
>>>> I'm talking about the tftp logs on the tftp server:
>>>>
>>>> Something like 'tail -f /var/log/tftp' or 'tail -f /var/log/messages'
>>>> should do the trick.
>>>>
>>>> Dave
>>>>
>>>> -----Original Message-----
>>>> From: asterisk-users-bounces at lists.digium.com
>>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sasa
>>>> Sent: Monday, October 13, 2008 9:57 AM
>>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>>>
>>>> I cann't view phone log files because, after reboot, the phone is 
>>>> stopped
>>>> on
>>>> this screen ( 'upgrading' with MAC address) !
>>>> Regards.
>>>>
>>>> ------
>>>>
>>>>   Salvatore.
>>>>
>>>>
>>>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users