[asterisk-users] ISDN

[Steve Totaro]

On Tue, Oct 14, 2008 at 4:59 PM, Steve Totaro <
stotaro at totarotechnologies.com> wrote:

>
>
> On Mon, Oct 13, 2008 at 7:52 PM, Tzafrir Cohen <tzafrir.cohen at xorcom.com>wrote:
>
>> On Mon, Oct 13, 2008 at 04:55:01PM -0500, Michael Graves wrote:
>> > I had converations with both Pika and Xorcom wherein the thought that
>> > it should be possible using their interface hardware. There might be
>> > some software changes to be made in their drivers, but BRI should be
>> > usable in the US.
>>
>> Or actually: I suppose that now that Asterisk finally knows that spans
>> can be of size 2B+1D (as of 1.4.22), chan_dahdi will support US BRI will
>> with any BRI device that has a Zaptel/DAHDI driver. That should be
>> either ours (Xorcom) BRI module of the Astribank, Junghanns
>> quad/octo/duo BRI cards and compatible, or the simple HFC-S -based
>> single port PCI cards. Sangoma A500 cards should have Zaptel drivers as
>> well.
>>
>> However this is based on quite a few cases and mostly remains to be
>> tested.
>>
>> (The relevant patch to Asterisk is trivial to apply to earlier versions
>> of 1.4 / 1.2)
>>
>>
> Can you define the SPIDs and what to do with them, otherwise it is fairly
> useless.
>
> --
> Thanks,
> Steve Totaro
> +18887771888 (Toll Free)
> +12409381212 (Cell)
> +12024369784 (Skype)
>

In addition, do the BRI cards/drivers use the US Standards for BRI or the
R.O.W (fest of the world)?

http://www.smallnetbuilder.com/content/view/30444/84/
Written by Michael Graves, May 20th 2008

-- 
Thanks,
Steve Totaro
+18887771888 (Toll Free)
+12409381212 (Cell)
+12024369784 (Skype)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081014/1d37b828/attachment.htm