[asterisk-users] ISDN

[Steve Totaro]

On Mon, Oct 13, 2008 at 7:52 PM, Tzafrir Cohen <tzafrir.cohen at xorcom.com>wrote:

> On Mon, Oct 13, 2008 at 04:55:01PM -0500, Michael Graves wrote:
> > I had converations with both Pika and Xorcom wherein the thought that
> > it should be possible using their interface hardware. There might be
> > some software changes to be made in their drivers, but BRI should be
> > usable in the US.
>
> Or actually: I suppose that now that Asterisk finally knows that spans
> can be of size 2B+1D (as of 1.4.22), chan_dahdi will support US BRI will
> with any BRI device that has a Zaptel/DAHDI driver. That should be
> either ours (Xorcom) BRI module of the Astribank, Junghanns
> quad/octo/duo BRI cards and compatible, or the simple HFC-S -based
> single port PCI cards. Sangoma A500 cards should have Zaptel drivers as
> well.
>
> However this is based on quite a few cases and mostly remains to be
> tested.
>
> (The relevant patch to Asterisk is trivial to apply to earlier versions
> of 1.4 / 1.2)
>
>
Can you define the SPIDs and what to do with them, otherwise it is fairly
useless.

-- 
Thanks,
Steve Totaro
+18887771888 (Toll Free)
+12409381212 (Cell)
+12024369784 (Skype)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081014/c2fb4877/attachment.htm