[asterisk-users] TDM400 (?) zap hangup

[Roderick A. Anderson]

Jared Smith wrote:
> On Wed, 2008-11-19 at 11:07 -0800, Roderick A. Anderson wrote:
>> The TDM400 works taking inbound calls and gives a dial tone when the
>> phone is picked up but as soon as a key is pressed the line (Asterisk
>> says) hangs up.  Asterisk is configured based on a working system but
>> that one only has one module inbound (FXO?)  The outbound settings are
>> based on docs from voip-info.org.
> 
> It sounds to me like you've got the two channels pointed at a context
> that doesn't exist, or there aren't extensions in that context that
> match the number being dialed.  Look in zapata.conf (or chan_dahdi.conf
> if you're using DAHDI) and look for the "context=" line immediately
> above the "channel=>" line for each channel.  That tells Asterisk where
> in the dialplan to look when calls come into Asterisk from those
> channels.
> 
> Next, look at extensions.conf and see if those contexts exist.  For
> example, if your FXS port (the port connected to an analog phone) is
> channel 1, and you're trying to dial extension 500 from the analog
> phone, make sure the context contains an extension 500.  
> 
> You can also check from the Asterisk CLI by typing "dialplan show
> 500 at context", where 500 is the extension you're trying to dial and
> context is the name of the context where calls are being sent.

Thanks for the pointers Jared.  They will help.


Rod
--