[asterisk-users] [SOLVED] TDM400 (?) zap hangup

[Roderick A. Anderson]

Roderick A. Anderson wrote:
> And if that ain't confusing I don't know what would be.
> 
> I bought a TDM400 with two modules (FXO, FXS) a couple or so years ago 
> and ended up never using it.  Passed it along to a friend who is having 
> some problems with it.  (He isn't on this list.)
> 
> We've both tried searches using Google but haven't been able to find
> anything that helps.  So this is more a question of
> what-the-heck-should-we-be-searching-for. :-)
> 
> The TDM400 works taking inbound calls and gives a dial tone when the
> phone is picked up but as soon as a key is pressed the line (Asterisk
> says) hangs up.  Asterisk is configured based on a working system but
> that one only has one module inbound (FXO?)  The outbound settings are
> based on docs from voip-info.org.
> 
> Does this ring a bell for anyone?  No pun intended.
> 
> Unfortunately the system is 35 miles away and I haven't got the logs
> handy so I can't provide more right now.  Just hoping for a clue on
> search terms.

Thanks to Tzafrir Cohen and Jared Smith we've solved the problem.

It was a "A Series of Unfortunate Events".  The main one was, there was 
no (and then an incorrect) context= for the ZAP channel.  The incorrect 
one came about because of a miss-communication while testing.  We were 
able to dial-out but the logic in the dialplan to select a context for 
local calls, toll-free, etc. was missing.  Once we got the channel set 
to the correct context all was well.


Again thanks,
Rod
-- 
> TIA,
> Rod