[asterisk-users] test OpenVox B400P and junghans card for dahdi BRI wcb4xxp

[lizhong zhu]

hello, users:
I tried to change to hardhdlc in system. but i still can not make calls. the port 4 led still can be be on.
=========system.conf==================
# Autogenerated by ./dahdi_genconf on Wed Nov 12 19:22:36 2008 -- do not hand edit
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Global data

loadzone = us
defaultzone = us
span=1,1,3,ccs,ami
span=2,2,3,ccs,ami
span=3,3,3,ccs,ami
span=4,4,3,ccs,ami
bchan=1,2
hardhdlc=3
bchan=4,5
hardhdlc=6
bchan=7,8
hardhdlc=9
bchan=10,11
hardhdlc=12
=========chan_dahdi.conf===========
[channels]
;
; Default language
;
;language=en
;
; Default context
;
;
switchtype = euroisdn

; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode)
signalling = bri_cpe_ptmp
; p2p TE mode (for connecting ISDN lines in point-to-point mode)
;signalling = bri_cpe
; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode)
;signalling = bri_net_ptmp
; p2p NT mode (for connecting an ISDN pbx in point-to-point mode)
;signalling = bri_net

pridialplan = local
prilocaldialplan = dynamic
nationalprefix = 0
internationalprefix = 00

priindication = passthrough

echocancel = yes

context=demo
group = 1
; S/T port 1
channel => 1-2

group = 2
; S/T port 2
channel => 4-5

group = 3
; S/T port 3
channel => 7-8

group = 4
; S/T port 4
channel => 10-11
============dmesg============
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 217
wcb4xxp 0000:02:02.0: Identified Wildcard B410P (controller rev 1) at 0001a000, IRQ 217
wcb4xxp 0000:02:02.0: VPM 0/1 init: chip ver 01
printk: 5 messages suppressed.
wcb4xxp 0000:02:02.0: ec_write: Wrote 0x00 to register 0x1a8 of VPM 0 but got back 0x01
wcb4xxp 0000:02:02.0: ec_write: Wrote 0x00 to register 0x1ac of VPM 0 but got back 0x01
wcb4xxp 0000:02:02.0: ec_write: Wrote 0x00 to register 0x1b0 of VPM 0 but got back 0x01
wcb4xxp 0000:02:02.0: ec_write: Wrote 0x00 to register 0x1a9 of VPM 0 but got back 0x01
wcb4xxp 0000:02:02.0: VPM 1/1 init: chip ver 01
wcb4xxp 0000:02:02.0: NOTE: hardware echo cancellation has been disabled
wcb4xxp 0000:02:02.0: Port 1: TE mode
wcb4xxp 0000:02:02.0: Port 2: TE mode
wcb4xxp 0000:02:02.0: Port 3: TE mode
wcb4xxp 0000:02:02.0: Port 4: TE mode
wcb4xxp 0000:02:02.0: Did not do the highestorder stuff
wcb4xxp 0000:02:02.0: Reconfigured channel 1 (B4/0/1/1) sigtype 00000080
wcb4xxp 0000:02:02.0: Reconfigured channel 2 (B4/0/1/2) sigtype 00000080
wcb4xxp 0000:02:02.0: Reconfigured channel 3 (B4/0/1/3) sigtype 00080080
wcb4xxp 0000:02:02.0: Configuring hardware HDLC on B4/0/1/3
wcb4xxp 0000:02:02.0: Reconfigured channel 4 (B4/0/2/1) sigtype 00000080
wcb4xxp 0000:02:02.0: Reconfigured channel 5 (B4/0/2/2) sigtype 00000080
wcb4xxp 0000:02:02.0: Reconfigured channel 6 (B4/0/2/3) sigtype 00080080
wcb4xxp 0000:02:02.0: Configuring hardware HDLC on B4/0/2/3
wcb4xxp 0000:02:02.0: Reconfigured channel 7 (B4/0/3/1) sigtype 00000080
wcb4xxp 0000:02:02.0: Reconfigured channel 8 (B4/0/3/2) sigtype 00000080
wcb4xxp 0000:02:02.0: Reconfigured channel 9 (B4/0/3/3) sigtype 00080080
wcb4xxp 0000:02:02.0: Configuring hardware HDLC on B4/0/3/3
wcb4xxp 0000:02:02.0: Reconfigured channel 10 (B4/0/4/1) sigtype 00000080
wcb4xxp 0000:02:02.0: Reconfigured channel 11 (B4/0/4/2) sigtype 00000080
wcb4xxp 0000:02:02.0: Reconfigured channel 12 (B4/0/4/3) sigtype 00080080
wcb4xxp 0000:02:02.0: Configuring hardware HDLC on B4/0/4/3
dahdi: Registered tone zone 0 (United States / North America)
wcb4xxp 0000:02:02.0: open() on chan B4/0/1/1 (1/1)
wcb4xxp 0000:02:02.0: close() on chan B4/0/1/1 (1/1)
wcb4xxp 0000:02:02.0: open() on chan B4/0/1/2 (2/2)
wcb4xxp 0000:02:02.0: close() on chan B4/0/1/2 (2/2)
wcb4xxp 0000:02:02.0: open() on chan B4/0/1/3 (3/3)
wcb4xxp 0000:02:02.0: close() on chan B4/0/1/3 (3/3)
wcb4xxp 0000:02:02.0: open() on chan B4/0/2/1 (4/1)
wcb4xxp 0000:02:02.0: close() on chan B4/0/2/1 (4/1)
wcb4xxp 0000:02:02.0: open() on chan B4/0/2/2 (5/2)
wcb4xxp 0000:02:02.0: close() on chan B4/0/2/2 (5/2)
wcb4xxp 0000:02:02.0: open() on chan B4/0/2/3 (6/3)
wcb4xxp 0000:02:02.0: close() on chan B4/0/2/3 (6/3)
wcb4xxp 0000:02:02.0: open() on chan B4/0/3/1 (7/1)
wcb4xxp 0000:02:02.0: close() on chan B4/0/3/1 (7/1)
any idea for that? 
thanks!
james




      ___________________________________________________________ 
 雅虎邮箱，您的终生邮箱！ 
http://cn.mail.yahoo.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081113/76317cd3/attachment-0001.htm