<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;">hello, users:<br>I tried to change to hardhdlc in system. but i still can not make calls. the port 4 led still can be be on.<br>=========system.conf==================<br># Autogenerated by ./dahdi_genconf on Wed Nov 12 19:22:36 2008 -- do not hand edit<br># Dahdi Configuration File<br>#<br># This file is parsed by the Dahdi Configurator, dahdi_cfg<br>#<br># Global data<br><br>loadzone = us<br>defaultzone = us<br>span=1,1,3,ccs,ami<br>span=2,2,3,ccs,ami<br>span=3,3,3,ccs,ami<br>span=4,4,3,ccs,ami<br>bchan=1,2<br>hardhdlc=3<br>bchan=4,5<br>hardhdlc=6<br>bchan=7,8<br>hardhdlc=9<br>bchan=10,11<br>hardhdlc=12<br>=========chan_dahdi.conf===========<br>[channels]<br>;<br>; Default language<br>;<br>;language=en<br>;<br>; Default context<br>;<br>;<br>switchtype = euroisdn<br><br>; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode)<br>signalling =
bri_cpe_ptmp<br>; p2p TE mode (for connecting ISDN lines in point-to-point mode)<br>;signalling = bri_cpe<br>; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode)<br>;signalling = bri_net_ptmp<br>; p2p NT mode (for connecting an ISDN pbx in point-to-point mode)<br>;signalling = bri_net<br><br>pridialplan = local<br>prilocaldialplan = dynamic<br>nationalprefix = 0<br>internationalprefix = 00<br><br>priindication = passthrough<br><br>echocancel = yes<br><br>context=demo<br>group = 1<br>; S/T port 1<br>channel => 1-2<br><br>group = 2<br>; S/T port 2<br>channel => 4-5<br><br>group = 3<br>; S/T port 3<br>channel => 7-8<br><br>group = 4<br>; S/T port 4<br>channel => 10-11<br>============dmesg============<br>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 217<br>wcb4xxp 0000:02:02.0: Identified Wildcard B410P (controller rev 1) at 0001a000, IRQ 217<br>wcb4xxp 0000:02:02.0: VPM 0/1 init: chip ver
01<br>printk: 5 messages suppressed.<br>wcb4xxp 0000:02:02.0: ec_write: Wrote 0x00 to register 0x1a8 of VPM 0 but got back 0x01<br>wcb4xxp 0000:02:02.0: ec_write: Wrote 0x00 to register 0x1ac of VPM 0 but got back 0x01<br>wcb4xxp 0000:02:02.0: ec_write: Wrote 0x00 to register 0x1b0 of VPM 0 but got back 0x01<br>wcb4xxp 0000:02:02.0: ec_write: Wrote 0x00 to register 0x1a9 of VPM 0 but got back 0x01<br>wcb4xxp 0000:02:02.0: VPM 1/1 init: chip ver 01<br>wcb4xxp 0000:02:02.0: NOTE: hardware echo cancellation has been disabled<br>wcb4xxp 0000:02:02.0: Port 1: TE mode<br>wcb4xxp 0000:02:02.0: Port 2: TE mode<br>wcb4xxp 0000:02:02.0: Port 3: TE mode<br>wcb4xxp 0000:02:02.0: Port 4: TE mode<br>wcb4xxp 0000:02:02.0: Did not do the highestorder stuff<br>wcb4xxp 0000:02:02.0: Reconfigured channel 1 (B4/0/1/1) sigtype 00000080<br>wcb4xxp 0000:02:02.0: Reconfigured channel 2 (B4/0/1/2) sigtype 00000080<br>wcb4xxp 0000:02:02.0: Reconfigured channel 3 (B4/0/1/3)
sigtype 00080080<br>wcb4xxp 0000:02:02.0: Configuring hardware HDLC on B4/0/1/3<br>wcb4xxp 0000:02:02.0: Reconfigured channel 4 (B4/0/2/1) sigtype 00000080<br>wcb4xxp 0000:02:02.0: Reconfigured channel 5 (B4/0/2/2) sigtype 00000080<br>wcb4xxp 0000:02:02.0: Reconfigured channel 6 (B4/0/2/3) sigtype 00080080<br>wcb4xxp 0000:02:02.0: Configuring hardware HDLC on B4/0/2/3<br>wcb4xxp 0000:02:02.0: Reconfigured channel 7 (B4/0/3/1) sigtype 00000080<br>wcb4xxp 0000:02:02.0: Reconfigured channel 8 (B4/0/3/2) sigtype 00000080<br>wcb4xxp 0000:02:02.0: Reconfigured channel 9 (B4/0/3/3) sigtype 00080080<br>wcb4xxp 0000:02:02.0: Configuring hardware HDLC on B4/0/3/3<br>wcb4xxp 0000:02:02.0: Reconfigured channel 10 (B4/0/4/1) sigtype 00000080<br>wcb4xxp 0000:02:02.0: Reconfigured channel 11 (B4/0/4/2) sigtype 00000080<br>wcb4xxp 0000:02:02.0: Reconfigured channel 12 (B4/0/4/3) sigtype 00080080<br>wcb4xxp 0000:02:02.0: Configuring hardware HDLC on B4/0/4/3<br>dahdi:
Registered tone zone 0 (United States / North America)<br>wcb4xxp 0000:02:02.0: open() on chan B4/0/1/1 (1/1)<br>wcb4xxp 0000:02:02.0: close() on chan B4/0/1/1 (1/1)<br>wcb4xxp 0000:02:02.0: open() on chan B4/0/1/2 (2/2)<br>wcb4xxp 0000:02:02.0: close() on chan B4/0/1/2 (2/2)<br>wcb4xxp 0000:02:02.0: open() on chan B4/0/1/3 (3/3)<br>wcb4xxp 0000:02:02.0: close() on chan B4/0/1/3 (3/3)<br>wcb4xxp 0000:02:02.0: open() on chan B4/0/2/1 (4/1)<br>wcb4xxp 0000:02:02.0: close() on chan B4/0/2/1 (4/1)<br>wcb4xxp 0000:02:02.0: open() on chan B4/0/2/2 (5/2)<br>wcb4xxp 0000:02:02.0: close() on chan B4/0/2/2 (5/2)<br>wcb4xxp 0000:02:02.0: open() on chan B4/0/2/3 (6/3)<br>wcb4xxp 0000:02:02.0: close() on chan B4/0/2/3 (6/3)<br>wcb4xxp 0000:02:02.0: open() on chan B4/0/3/1 (7/1)<br>wcb4xxp 0000:02:02.0: close() on chan B4/0/3/1 (7/1)<br>any idea for that? <br>thanks!<br>james<br><br></td></tr></table><br>
<hr size=1><a href="http://cn.mail.yahoo.com/"> 雅虎邮箱，您的终生邮箱！</a>