[asterisk-users] Error Counters on PRI Circuit

[Sherwood McGowan]

Don Pobanz wrote:
>> Joe Pukepail wrote: 
>>
>> 	Is there a way to see error counts on the T1 of a PRI?  
>> Hooked up to asterisk via a digium TE122.   Looking for 
>> something to make sure I'm not getting any CRC, framing or 
>> other errors on the T1. 
>> 	
>>     
>
> Many moons ago I use to used a program called zttool. It allowed looking
> at spans and the alarm state and bipolar errors and bit errors etc. You
> could also see which channels were in use and look at signaling bits. 
>
> Anyhow this program sits in the zaptel directory. You may want to check
> it out. 
>
> Don Pobanz
>
> --
> MailDefender Message Security: Click below to verify authenticity
> http://www.exchangedefender.com/verify.asp?id=m4LIME3X015989&from=dpobanz@hastingsutilities.com
>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>   
It compiles by default with Zaptel at this point, IIRC. Very handy tool