[asterisk-users] Trouble with unicall

Sun Jun 1 19:55:22 CDT 2008

Dear Alvaro

In my zaptel.conf file I configured as:
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16

I changed with the value you told me, but still the same message error.

Alejandro

2008/6/1 Alvaro Parres <aparres at gmail.com>:

> Alejandro:
>
>    I think that you problem is at /etc/zaptel.conf file... becouse you
> config you card as CCS/HDB3, that configuration normaly is for data or isdn
> connections.
>
>   Try setting as CAS,HDB3.... an example of the file can be:
>
>
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> dchan=16
> cas=17-31:1101
>
>
>
> On Sun, Jun 1, 2008 at 5:37 PM, Alejandro Fernandez <allcontrol at gmail.com>
> wrote:
>
>>
>> Dear List Pal
>>
>> I have downloaded your astunicall-1.4.18-0.2.tar.gz file and I followed
>>
>> carefully your step.
>> Every step went with out any problem.
>> Beside this I have a Digium TE122P card as a E1 digital trame.
>>
>> I live in Argentina.
>> When I issue ztcfg -vv it show me:
>>
>> Zaptel Version: 1.4.9.2
>> Echo Canceller: MG2
>> Configuration
>> ======================
>>
>> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>
>>
>> Channel map:
>>
>> Channel 01: Clear channel (Default) (Slaves: 01)
>> Channel 02: Clear channel (Default) (Slaves: 02)
>> Channel 03: Clear channel (Default) (Slaves: 03)
>> Channel 04: Clear channel (Default) (Slaves: 04)
>>
>>
>> Channel 05: Clear channel (Default) (Slaves: 05)
>> Channel 06: Clear channel (Default) (Slaves: 06)
>> Channel 07: Clear channel (Default) (Slaves: 07)
>> Channel 08: Clear channel (Default) (Slaves: 08)
>> Channel 09: Clear channel (Default) (Slaves: 09)
>>
>>
>> Channel 10: Clear channel (Default) (Slaves: 10)
>> Channel 11: Clear channel (Default) (Slaves: 11)
>> Channel 12: Clear channel (Default) (Slaves: 12)
>> Channel 13: Clear channel (Default) (Slaves: 13)
>> Channel 14: Clear channel (Default) (Slaves: 14)
>>
>>
>> Channel 15: Clear channel (Default) (Slaves: 15)
>> Channel 16: D-channel (Default) (Slaves: 16)
>> Channel 17: Clear channel (Default) (Slaves: 17)
>> Channel 18: Clear channel (Default) (Slaves: 18)
>> Channel 19: Clear channel (Default) (Slaves: 19)
>>
>>
>> Channel 20: Clear channel (Default) (Slaves: 20)
>> Channel 21: Clear channel (Default) (Slaves: 21)
>> Channel 22: Clear channel (Default) (Slaves: 22)
>> Channel 23: Clear channel (Default) (Slaves: 23)
>> Channel 24: Clear channel (Default) (Slaves: 24)
>>
>>
>> Channel 25: Clear channel (Default) (Slaves: 25)
>> Channel 26: Clear channel (Default) (Slaves: 26)
>> Channel 27: Clear channel (Default) (Slaves: 27)
>> Channel 28: Clear channel (Default) (Slaves: 28)
>> Channel 29: Clear channel (Default) (Slaves: 29)
>>
>>
>> Channel 30: Clear channel (Default) (Slaves: 30)
>> Channel 31: Clear channel (Default) (Slaves: 31)
>>
>> 31 channels to configure.
>>
>> cat /proc/zaptel/1:
>>
>> Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS RED
>>
>>
>>         IRQ misses: 29
>>
>>            1 WCT1/0/1 Clear
>>            2 WCT1/0/2 Clear
>>            3 WCT1/0/3 Clear
>>            4 WCT1/0/4 Clear
>>            5 WCT1/0/5 Clear
>>            6 WCT1/0/6 Clear
>>            7 WCT1/0/7 Clear
>>
>>
>>            8 WCT1/0/8 Clear
>>            9 WCT1/0/9 Clear
>>           10 WCT1/0/10 Clear
>>           11 WCT1/0/11 Clear
>>           12 WCT1/0/12 Clear
>>           13 WCT1/0/13 Clear
>>           14 WCT1/0/14 Clear
>>
>>
>>           15 WCT1/0/15 Clear
>>           16 WCT1/0/16 HDLCFCS
>>           17 WCT1/0/17 Clear
>>           18 WCT1/0/18 Clear
>>           19 WCT1/0/19 Clear
>>           20 WCT1/0/20 Clear
>>           21 WCT1/0/21 Clear
>>
>>
>>           22 WCT1/0/22 Clear
>>           23 WCT1/0/23 Clear
>>           24 WCT1/0/24 Clear
>>           25 WCT1/0/25 Clear
>>           26 WCT1/0/26 Clear
>>           27 WCT1/0/27 Clear
>>           28 WCT1/0/28 Clear
>>
>>
>>           29 WCT1/0/29 Clear
>>           30 WCT1/0/30 Clear
>>           31 WCT1/0/31 Clear
>>
>> The card is blinking the red LED.
>> Apparently all have gone well. But /var/log/asterisk/messages says:
>>
>> [May 29 18:34:40] ERROR[2780] chan_unicall.c: Unable to open channel 1:
>>
>>
>> Invalid argument
>> here = 0, tmp->channel = 0, channel = 1
>> [May 29 18:34:40] ERROR[2780] chan_unicall.c: Unable to register channel
>> '1-15'
>>
>> Any suggestion are wellcome.
>>
>> TIA
>>
>> Alejandro
>>
>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
>
> --
> Alvaro I. Parres Peredo
> Director de IT
> Grupo Xmarts SA de CV
> Tel: +52 (33) 35 63 6261 Ext. 112
> 01 800 087 2260
> Cel: +52 (33) 33 68 1087
> alvaro.parres at xmarts.com.mx
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

-- 
Lic. Alejandro Fernández Herrero
Product Manager
www.all-control.com.ar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080601/fe801854/attachment.htm 